[PATCH v8 3/4] ARM: dts: enable GPIO for Broadcom Cygnus

From: Ray Jui
Date: Wed Feb 04 2015 - 12:20:20 EST


This enables all 3 GPIO controllers including the ASIU GPIO, the
chipcommonG GPIO, and the ALWAYS-ON GPIO, for Broadcom Cygnus SoC

Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index b014ce5..a3b8621 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -60,6 +60,39 @@
<0x0301d24c 0x2c>;
};

+ gpio_crmu: gpio@03024800 {
+ compatible = "brcm,cygnus-gpio";
+ reg = <0x03024800 0x50>,
+ <0x03024008 0x18>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ ngpios = <24>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-gpio";
+ reg = <0x180a5000 0x668>;
+ ngpios = <146>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinmux = <&pinctrl>;
+
+ interrupt-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/