Re: [PATCH] ARM: Don't use complete() during __cpu_die
From: Krzysztof Kozlowski
Date: Thu Feb 05 2015 - 02:46:15 EST
On Åro, 2015-02-04 at 09:57 -0800, Paul E. McKenney wrote:
> On Wed, Feb 04, 2015 at 05:53:55PM +0100, Krzysztof Kozlowski wrote:
> > The complete() should not be used on offlined CPU. Rewrite the
> > wait-complete mechanism with wait_on_bit_timeout().
> >
> > The CPU triggering hot unplug (e.g. CPU0) will loop until some bit is
> > cleared. In each iteration schedule_timeout() is used with initial sleep
> > time of 1 ms. Later it is increased to 10 ms.
> >
> > The dying CPU will clear the bit which is safe in that context.
> >
> > This fixes following RCU warning on ARMv8 (Exynos 4412, Trats2) during
> > suspend to RAM:
> >
> > [ 31.113925] ===============================
> > [ 31.113928] [ INFO: suspicious RCU usage. ]
> > [ 31.113935] 3.19.0-rc7-next-20150203 #1914 Not tainted
> > [ 31.113938] -------------------------------
> > [ 31.113943] kernel/sched/fair.c:4740 suspicious rcu_dereference_check() usage!
> > [ 31.113946]
> > [ 31.113946] other info that might help us debug this:
> > [ 31.113946]
> > [ 31.113952]
> > [ 31.113952] RCU used illegally from offline CPU!
> > [ 31.113952] rcu_scheduler_active = 1, debug_locks = 0
> > [ 31.113957] 3 locks held by swapper/1/0:
> > [ 31.113988] #0: ((cpu_died).wait.lock){......}, at: [<c005a114>] complete+0x14/0x44
> > [ 31.114012] #1: (&p->pi_lock){-.-.-.}, at: [<c004a790>] try_to_wake_up+0x28/0x300
> > [ 31.114035] #2: (rcu_read_lock){......}, at: [<c004f1b8>] select_task_rq_fair+0x5c/0xa04
> > [ 31.114038]
> > [ 31.114038] stack backtrace:
> > [ 31.114046] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150203 #1914
> > [ 31.114050] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
> > [ 31.114076] [<c0014ce4>] (unwind_backtrace) from [<c0011c30>] (show_stack+0x10/0x14)
> > [ 31.114091] [<c0011c30>] (show_stack) from [<c04dc048>] (dump_stack+0x70/0xbc)
> > [ 31.114105] [<c04dc048>] (dump_stack) from [<c004f83c>] (select_task_rq_fair+0x6e0/0xa04)
> > [ 31.114118] [<c004f83c>] (select_task_rq_fair) from [<c004a83c>] (try_to_wake_up+0xd4/0x300)
> > [ 31.114129] [<c004a83c>] (try_to_wake_up) from [<c00598a0>] (__wake_up_common+0x4c/0x80)
> > [ 31.114140] [<c00598a0>] (__wake_up_common) from [<c00598e8>] (__wake_up_locked+0x14/0x1c)
> > [ 31.114150] [<c00598e8>] (__wake_up_locked) from [<c005a134>] (complete+0x34/0x44)
> > [ 31.114167] [<c005a134>] (complete) from [<c04d6ca4>] (cpu_die+0x24/0x84)
> > [ 31.114179] [<c04d6ca4>] (cpu_die) from [<c005a508>] (cpu_startup_entry+0x328/0x358)
> > [ 31.114189] [<c005a508>] (cpu_startup_entry) from [<40008784>] (0x40008784)
> > [ 31.114226] CPU1: shutdown
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
>
> One suggestion below, but either way:
>
> Acked-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
Thanks!
> (If you would rather that I carried the patch, please let me know.)
I'll send the patch through Russell's patch system.
>
> > ---
> > arch/arm/kernel/smp.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++---
> > 1 file changed, 49 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
> > index 86ef244c5a24..bb8ff465975f 100644
> > --- a/arch/arm/kernel/smp.c
> > +++ b/arch/arm/kernel/smp.c
> > @@ -26,6 +26,7 @@
> > #include <linux/completion.h>
> > #include <linux/cpufreq.h>
> > #include <linux/irq_work.h>
> > +#include <linux/wait.h>
> >
> > #include <linux/atomic.h>
> > #include <asm/smp.h>
> > @@ -76,6 +77,9 @@ enum ipi_msg_type {
> >
> > static DECLARE_COMPLETION(cpu_running);
> >
> > +#define CPU_DIE_WAIT_BIT 0
> > +static unsigned long wait_cpu_die;
> > +
> > static struct smp_operations smp_ops;
> >
> > void __init smp_set_ops(struct smp_operations *ops)
> > @@ -133,6 +137,8 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
> > pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
> > }
> >
> > + set_bit(CPU_DIE_WAIT_BIT, &wait_cpu_die);
> > + smp_mb__after_atomic();
> >
> > memset(&secondary_data, 0, sizeof(secondary_data));
> > return ret;
> > @@ -213,7 +219,40 @@ int __cpu_disable(void)
> > return 0;
> > }
> >
> > -static DECLARE_COMPLETION(cpu_died);
> > +/*
> > + * Wait for 5000*1 ms for 'wait_cpu_die' bit to be cleared.
> > + * Actually the real wait time will be longer because of schedule()
> > + * called bit_wait_timeout.
> > + *
> > + * Returns 0 if bit was cleared (CPU died) or non-zero
> > + * otherwise (1 or negative ERRNO).
> > + */
> > +static int wait_for_cpu_die(void)
> > +{
> > + int retries = 5000, sleep_ms = 1, ret = 0;
> > +
> > + might_sleep();
> > +
> > + smp_mb__before_atomic();
> > + while (test_bit(CPU_DIE_WAIT_BIT, &wait_cpu_die)) {
> > + ret = out_of_line_wait_on_bit_timeout(&wait_cpu_die,
> > + CPU_DIE_WAIT_BIT, bit_wait_timeout,
> > + TASK_UNINTERRUPTIBLE,
> > + msecs_to_jiffies(sleep_ms));
> > + if (!ret || (--retries <= 0))
> > + break;
> > +
> > + if (retries < 4000) {
> > + /* After ~1000 ms increase sleeping time to 10 ms */
> > + retries = 400;
> > + sleep_ms = 10;
> > + }
>
> Another approach that gets roughly the same response times with fewer
> wakeups (and a bit less code) would be something like this:
>
> int ms_left = 5000, sleep_ms = 1, ret = 0;
>
> might_sleep();
>
> smp_mb__before_atomic();
> while (test_bit(CPU_DIE_WAIT_BIT, &wait_cpu_die)) {
> ret = out_of_line_wait_on_bit_timeout(&wait_cpu_die,
> CPU_DIE_WAIT_BIT, bit_wait_timeout,
> TASK_UNINTERRUPTIBLE,
> msecs_to_jiffies(sleep_ms));
> ms_left -= sleep_ms;
> if (!ret || (ms_left <= 0))
> break;
> sleep_ms = DIV_ROUND_UP(sleep_ms * 11, 10);
>
> This would result in less than 50 wakeups compared to more than 4000,
> with little added latency in the common case.
>
> But either way works for me.
It looks better. I'll use it although Stephen Boyd had an other idea
which could be smaller and more schedule-friendly.
Thanks for review,
Krzysztof
>
> > +
> > + smp_mb__before_atomic(); /* For next test_bit() in loop */
> > + }
> > +
> > + return ret;
> > +}
> >
> > /*
> > * called on the thread which is asking for a CPU to be shutdown -
> > @@ -221,7 +260,7 @@ static DECLARE_COMPLETION(cpu_died);
> > */
> > void __cpu_die(unsigned int cpu)
> > {
> > - if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
> > + if (wait_for_cpu_die()) {
> > pr_err("CPU%u: cpu didn't die\n", cpu);
> > return;
> > }
> > @@ -236,6 +275,10 @@ void __cpu_die(unsigned int cpu)
> > */
> > if (!platform_cpu_kill(cpu))
> > pr_err("CPU%u: unable to kill\n", cpu);
> > +
> > + /* Prepare the bit for some next CPU die */
> > + set_bit(CPU_DIE_WAIT_BIT, &wait_cpu_die);
> > + smp_mb__after_atomic();
> > }
> >
> > /*
> > @@ -250,6 +293,8 @@ void __ref cpu_die(void)
> > {
> > unsigned int cpu = smp_processor_id();
> >
> > + WARN_ON(!test_bit(CPU_DIE_WAIT_BIT, &wait_cpu_die));
> > +
> > idle_task_exit();
> >
> > local_irq_disable();
> > @@ -267,7 +312,8 @@ void __ref cpu_die(void)
> > * this returns, power and/or clocks can be removed at any point
> > * from this CPU and its cache by platform_cpu_kill().
> > */
> > - complete(&cpu_died);
> > + clear_bit(CPU_DIE_WAIT_BIT, &wait_cpu_die);
> > + smp_mb__after_atomic();
> >
> > /*
> > * Ensure that the cache lines associated with that completion are
> > --
> > 1.9.1
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/