[PATCH] ARM: dts: zynq: Add OCM node

[Michal Simek]

Add OCM node for all zynq boards. OCM location
can changed but for all current boards this
is the location where OCM is.`

Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

This patch is done based on discussion here.
https://lkml.org/lkml/2014/12/1/396

There are some ways how to do it.
OCM location can be changed but board DTS files
can easily rewrite it.
The problem which there is that node has address
in it but maybe someone can suggest better solution.
---
 arch/arm/boot/dts/zynq-7000.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index a5cd2eda3edf..d55a8b365a6c 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -150,6 +150,11 @@
 			reg = <0xf8006000 0x1000>;
 		};
 
+		ocm: sram@fffc0000 {
+			compatible = "mmio-sram";
+			reg = <0xfffc0000 0x10000>;
+		};
+
 		uart0: serial@e0000000 {
 			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
-- 
1.8.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/