Re: [PATCH v5 1/2] power: rt5033_charger: Add RT5033 charger device driver

[Sebastian Reichel]

Hi Beomho,

On Mon, Mar 09, 2015 at 10:23:10AM +0900, Beomho Seo wrote:
> This patch add device driver of Richtek RT5033 PMIC. The driver support
> switching charger. rt5033 charger provide three charging mode.
> Three charging mode are pre charge mode, fast cahrge mode and constant voltage
> mode. They are have vary charge rate, charge parameters. The charge parameters
> can be controlled by i2c interface.

Driver looks mostly ok, but I have some comments [inline].

> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> Cc: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
> Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> ---
> Changes in v5
> - none.
> Changes in v4
> - Change power supply type to POWER_SUPPLY_TYPE_MAINS.
> Changes in v3
> Changes in v2
> - none
> 
>  drivers/power/Kconfig          |    8 +
>  drivers/power/Makefile         |    1 +
>  drivers/power/rt5033_charger.c |  485 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 494 insertions(+)
>  create mode 100644 drivers/power/rt5033_charger.c
> 
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 27b751b..67e9af7 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -418,6 +418,14 @@ config BATTERY_RT5033
>  	  The fuelgauge calculates and determines the battery state of charge
>  	  according to battery open circuit voltage.
>  
> +config CHARGER_RT5033
> +	tristate "RT5033 battery charger support"
> +	depends on MFD_RT5033
> +	help
> +	  This adds support for battery charger in Richtek RT5033 PMIC.
> +	  The device supports pre-charge mode, fast charge mode and
> +	  constant voltage mode.
> +
>  source "drivers/power/reset/Kconfig"
>  
>  endif # POWER_SUPPLY
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 36f9e0d..c5d72e0 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
>  obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
>  obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
>  obj-$(CONFIG_POWER_AVS)		+= avs/
> +obj-$(CONFIG_POWER_RT5033)	+= rt5033_charger.o

this should be 

obj-$(CONFIG_CHARGER_RT5033) += rt5033_charger.o

according to your Kconfig patch. How did you test it actually?

>  obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
>  obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
>  obj-$(CONFIG_POWER_RESET)	+= reset/
> diff --git a/drivers/power/rt5033_charger.c b/drivers/power/rt5033_charger.c
> new file mode 100644
> index 0000000..7f8f6c3
> --- /dev/null
> +++ b/drivers/power/rt5033_charger.c
>
> [...]
>
> +static int rt5033_get_charger_current(struct rt5033_charger *charger,
> +		enum power_supply_property psp)
> +{
> +	struct regmap *regmap = charger->rt5033->regmap;
> +	unsigned int state, reg_data, data;
> +
> +	if (psp == POWER_SUPPLY_PROP_CURRENT_MAX)
> +		return RT5033_CHG_MAX_CURRENT;

drop this psp check and the psp parameter to this function, so that
the function only takes care of the current current.

> +	regmap_read(regmap, RT5033_REG_CHG_CTRL5, &reg_data);
> +
> +	state = (reg_data >> RT5033_CHGCTRL5_ICHG_SHIFT) & 0xf;
> +
> +	if (state > RT5033_CHG_MAX_CURRENT)
> +		state = RT5033_CHG_MAX_CURRENT;
> +
> +	data = state * 100 + 700;
> +
> +	return data;
> +}
> +
> +static int rt5033_get_charge_voltage(struct rt5033_charger *charger,
> +		enum power_supply_property psp)
> +{
> +	struct regmap *regmap = charger->rt5033->regmap;
> +	unsigned int state, reg_data, data;
> +
> +	if (psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX)
> +		return RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX;

drop this psp check and the psp parameter to this function, so that
the function only takes care of the current voltage.

> +	regmap_read(regmap, RT5033_REG_CHG_CTRL2, &reg_data);
> +
> +	state = reg_data >> 2;
> +
> +	data = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN +
> +		RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM * state;
> +
> +	if (data > RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX)
> +		data = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX;
> +
> +	return data;
> +}
>
> [...]
>
> +
> +static enum power_supply_property rt5033_charger_props[] = {
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_CHARGE_TYPE,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +	POWER_SUPPLY_PROP_CURRENT_MAX,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> +	POWER_SUPPLY_PROP_MODEL_NAME,
> +	POWER_SUPPLY_PROP_MANUFACTURER,
> +};
> +
> +static int rt5033_charger_get_property(struct power_supply *psy,
> +			enum power_supply_property psp,
> +			union power_supply_propval *val)
> +{
> +	struct rt5033_charger *charger = container_of(psy,
> +			struct rt5033_charger, psy);
> +	int ret = 0;
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_STATUS:
> +		val->intval = rt5033_get_charger_state(charger);
> +		break;
> +	case POWER_SUPPLY_PROP_CHARGE_TYPE:
> +		val->intval = rt5033_get_charger_type(charger);
> +		break;
> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> +	case POWER_SUPPLY_PROP_CURRENT_MAX:
> +		val->intval = rt5033_get_charger_current(charger, psp);
> +		break;

remove the special handling of POWER_SUPPLY_PROP_CURRENT_MAX in 
rt5033_get_charger_current() and do it like this:

case POWER_SUPPLY_PROP_CURRENT_NOW:
    val->intval = rt5033_get_charger_current(charger);
    break;
case POWER_SUPPLY_PROP_CURRENT_MAX:
    val->intval = RT5033_CHG_MAX_CURRENT;
    break;

> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> +		val->intval = rt5033_get_charge_voltage(charger, psp);
> +		break;

same as current handling:

case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
    val->intval = rt5033_get_charge_voltage(charger);
    break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
    val->intval = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX;
    break;

> +	case POWER_SUPPLY_PROP_MODEL_NAME:
> +		val->strval = RT5033_CHARGER_MODEL;
> +		break;
> +	case POWER_SUPPLY_PROP_MANUFACTURER:
> +		val->strval = RT5033_MANUFACTURER;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
>
> [...]
>
> +static int rt5033_charger_probe(struct platform_device *pdev)
> +{
> +	struct rt5033_charger *charger;
> +	struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
> +	int ret;
> +
> +	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
> +	if (!charger)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, charger);
> +	charger->dev = &pdev->dev;
> +	charger->rt5033 = rt5033;
> +
> +	charger->chg = rt5033_charger_dt_init(pdev);
> +	if (IS_ERR_OR_NULL(charger->chg))
> +		return -ENODEV;
> +
> +	ret = rt5033_charger_reg_init(charger);
> +	if (ret)
> +		return ret;
> +
> +	charger->psy.name = "rt5033-charger",
> +	charger->psy.type = POWER_SUPPLY_TYPE_MAINS,
> +	charger->psy.properties = rt5033_charger_props,
> +	charger->psy.num_properties = ARRAY_SIZE(rt5033_charger_props),
> +	charger->psy.get_property = rt5033_charger_get_property,
> +
> +	ret = power_supply_register(&pdev->dev, &charger->psy);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to register power supply\n");
> +		return ret;
> +	}

We have devm_power_supply_register() now, which would result in
complete removal of the rt5033_charger_remove() function :)

> +	return 0;
> +}
> +
> +static int rt5033_charger_remove(struct platform_device *pdev)
> +{
> +	struct rt5033_charger *charger = platform_get_drvdata(pdev);
> +
> +	power_supply_unregister(&charger->psy);
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id rt5033_charger_id[] = {
> +	{ "rt5033-charger", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, rt5033_charger_id);
> +
> +static struct platform_driver rt5033_charger_driver = {
> +	.driver = {
> +		.name = "rt5033-charger",
> +	},
> +	.probe = rt5033_charger_probe,
> +	.remove = rt5033_charger_remove,
> +	.id_table = rt5033_charger_id,
> +};
> +module_platform_driver(rt5033_charger_driver);
> +
> +MODULE_DESCRIPTION("Richtek RT5033 charger driver");
> +MODULE_AUTHOR("Beomho Seo <beomho.seo@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");

This should be 

MODULE_LICENSE("GPL v2");

-- Sebastian

Attachment: signature.asc
Description: Digital signature