Re: [RFC][PATCH 2/2] phy: miphy365x: Convert to use phy.h instead of phy-miphy365x.h

[Axel Lin]

2015-03-09 19:44 GMT+08:00 Kishon Vijay Abraham I <kishon@xxxxxx>:
> Hi,
>
>
> On Thursday 05 March 2015 07:27 AM, Axel Lin wrote:
>>
>> The defines in phy-miphy365x.h are all covered in phy.h:
>>
>> MIPHY_TYPE_SATA == PHY_TYPE_STA
>> MIPHY_TYPE_PCIE == PHY_TYPE_PCIE
>> MIPPHY_TYPE_USB == PHY_TYPE_USB2
>>
>> So covert to use phy.h and then delete phy-miphy365x.h.
>>
>> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
>> ---
>>   Documentation/devicetree/bindings/ata/ahci-st.txt       |  2 +-
>>   Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
>>   arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
>>   drivers/phy/phy-miphy365x.c                             | 14
>> +++++++-------
>>   include/dt-bindings/phy/phy-miphy365x.h                 | 14
>> --------------
>>   5 files changed, 14 insertions(+), 28 deletions(-)
>>   delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h
>>
>> diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt
>> b/Documentation/devicetree/bindings/ata/ahci-st.txt
>> index 0574a77..070748b 100644
>> --- a/Documentation/devicetree/bindings/ata/ahci-st.txt
>> +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
>> @@ -21,7 +21,7 @@ Example:
>>                 reg             = <0xfe380000 0x1000>;
>>                 interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
>>                 interrupt-names = "hostc";
>> -               phys            = <&miphy365x_phy MIPHY_PORT_0
>> MIPHY_TYPE_SATA>;
>> +               phys            = <&miphy365x_phy MIPHY_PORT_0
>> PHY_TYPE_SATA>;
>>                 phy-names       = "ahci_phy";
>>                 resets          = <&powerdown STIH416_SATA0_POWERDOWN>,
>>                                   <&softreset STIH416_SATA0_SOFTRESET>;
>> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>> b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>> index 9802d5d..087294d 100644
>> --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>> @@ -20,8 +20,8 @@ Required nodes        :  A sub-node is required for each
>> channel the controller
>>   Required properties (port (child) node):
>>   - #phy-cells  : Should be 1 (See second example)
>>                   Cell after port phandle is device type from:
>> -                       - MIPHY_TYPE_SATA
>> -                       - MIPHY_TYPE_PCI
>> +                       - PHY_TYPE_SATA
>> +                       - PHY_TYPE_PCIE
>>   - reg         : Address and length of register sets for each device in
>>                   "reg-names"
>>   - reg-names     : The names of the register addresses corresponding to
>> the
>> @@ -68,10 +68,10 @@ property, containing a phandle to the phy port node
>> and a device type.
>>
>>   Example:
>>
>> -#include <dt-bindings/phy/phy-miphy365x.h>
>> +#include <dt-bindings/phy/phy.h>
>>
>>         sata0: sata@fe380000 {
>>                 ...
>> -               phys      = <&phy_port0 MIPHY_TYPE_SATA>;
>> +               phys      = <&phy_port0 PHY_TYPE_SATA>;
>>                 ...
>>         };
>> diff --git a/arch/arm/boot/dts/stih416.dtsi
>> b/arch/arm/boot/dts/stih416.dtsi
>> index ea28eba..eeb7afe 100644
>> --- a/arch/arm/boot/dts/stih416.dtsi
>> +++ b/arch/arm/boot/dts/stih416.dtsi
>
>
> Can you split the patch so that I can queue the PHY part?

In my opinion, apply the patch as is should be fine and we don't have any
build breakage. I think the change in each file is pretty trivial and won't
cause problem. otherwise, I will have to send patches for the conversion
in each file and then wait until all patches are merged. Then send another
patch to delete include/dt-bindings/phy/phy-miphy365x.h.

Regards,
Axel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/