[PATCH 5/8] gpio: omap: convert gpio irq functions to use GPIO offset

From: grygorii.strashko
Date: Thu Mar 19 2015 - 13:26:18 EST


From: Grygorii Strashko <grygorii.strashko@xxxxxxxxxx>

Convert GPIO IRQ functions to use GPIO offset instead of system
GPIO numbers. This allows to drop unneeded conversations between
system GPIO <-> GPIO offset which are done in many places and
many times.
It is safe to do now because:
- gpiolib always passes GPIO offset to GPIO controller
- OMAP GPIO driver converted to use IRQ domain, so
struct irq_data->hwirq contains GPIO offset

This is preparation step before removing:
#define GPIO_INDEX(bank, gpio)
#define GPIO_BIT(bank, gpio)
int omap_irq_to_gpio()

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxxxxxx>
---
drivers/gpio/gpio-omap.c | 64 +++++++++++++++++++++++++-----------------------
1 file changed, 33 insertions(+), 31 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index ff5d54d..b39faa8 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -549,9 +549,10 @@ static void omap_clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
readl_relaxed(reg);
}

-static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
+static inline void omap_clear_gpio_irqstatus(struct gpio_bank *bank,
+ unsigned offset)
{
- omap_clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ omap_clear_gpio_irqbank(bank, BIT(offset));
}

static u32 omap_get_gpio_irqbank_mask(struct gpio_bank *bank)
@@ -612,13 +613,13 @@ static void omap_disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
writel_relaxed(l, reg);
}

-static inline void omap_set_gpio_irqenable(struct gpio_bank *bank, int gpio,
- int enable)
+static inline void omap_set_gpio_irqenable(struct gpio_bank *bank,
+ unsigned offset, int enable)
{
if (enable)
- omap_enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ omap_enable_gpio_irqbank(bank, BIT(offset));
else
- omap_disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ omap_disable_gpio_irqbank(bank, BIT(offset));
}

/*
@@ -629,14 +630,16 @@ static inline void omap_set_gpio_irqenable(struct gpio_bank *bank, int gpio,
* enabled. When system is suspended, only selected GPIO interrupts need
* to have wake-up enabled.
*/
-static int omap_set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
+static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
+ int enable)
{
- u32 gpio_bit = GPIO_BIT(bank, gpio);
+ u32 gpio_bit = BIT(offset);
unsigned long flags;

if (bank->non_wakeup_gpios & gpio_bit) {
dev_err(bank->dev,
- "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
+ "Unable to modify wakeup on non-wakeup GPIO%d\n",
+ offset);
return -EINVAL;
}

@@ -652,22 +655,22 @@ static int omap_set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
return 0;
}

-static void omap_reset_gpio(struct gpio_bank *bank, int gpio)
+static void omap_reset_gpio(struct gpio_bank *bank, unsigned offset)
{
- omap_set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1);
- omap_set_gpio_irqenable(bank, gpio, 0);
- omap_clear_gpio_irqstatus(bank, gpio);
- omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
- omap_clear_gpio_debounce(bank, GPIO_INDEX(bank, gpio));
+ omap_set_gpio_direction(bank, offset, 1);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ omap_clear_gpio_debounce(bank, offset);
}

/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;

- return omap_set_gpio_wakeup(bank, gpio, enable);
+ return omap_set_gpio_wakeup(bank, offset, enable);
}

static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -705,7 +708,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&bank->lock, flags);
bank->mod_usage &= ~(BIT(offset));
omap_disable_gpio_module(bank, offset);
- omap_reset_gpio(bank, bank->chip.base + offset);
+ omap_reset_gpio(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);

/*
@@ -819,14 +822,13 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
static void omap_gpio_irq_shutdown(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
unsigned long flags;
- unsigned offset = GPIO_INDEX(bank, gpio);
+ unsigned offset = d->hwirq;

spin_lock_irqsave(&bank->lock, flags);
bank->irq_usage &= ~(BIT(offset));
omap_disable_gpio_module(bank, offset);
- omap_reset_gpio(bank, gpio);
+ omap_reset_gpio(bank, offset);
spin_unlock_irqrestore(&bank->lock, flags);

/*
@@ -840,43 +842,43 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
static void omap_gpio_ack_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;

- omap_clear_gpio_irqstatus(bank, gpio);
+ omap_clear_gpio_irqstatus(bank, offset);
}

static void omap_gpio_mask_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;
unsigned long flags;

spin_lock_irqsave(&bank->lock, flags);
- omap_set_gpio_irqenable(bank, gpio, 0);
- omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
spin_unlock_irqrestore(&bank->lock, flags);
}

static void omap_gpio_unmask_irq(struct irq_data *d)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
- unsigned int gpio = omap_irq_to_gpio(bank, d->hwirq);
+ unsigned offset = d->hwirq;
unsigned int irq_mask = GPIO_BIT(bank, gpio);
u32 trigger = irqd_get_trigger_type(d);
unsigned long flags;

spin_lock_irqsave(&bank->lock, flags);
if (trigger)
- omap_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger);
+ omap_set_gpio_triggering(bank, offset, trigger);

/* For level-triggered GPIOs, the clearing must be done after
* the HW source is cleared, thus after the handler has run */
if (bank->level_mask & irq_mask) {
- omap_set_gpio_irqenable(bank, gpio, 0);
- omap_clear_gpio_irqstatus(bank, gpio);
+ omap_set_gpio_irqenable(bank, offset, 0);
+ omap_clear_gpio_irqstatus(bank, offset);
}

- omap_set_gpio_irqenable(bank, gpio, 1);
+ omap_set_gpio_irqenable(bank, offset, 1);
spin_unlock_irqrestore(&bank->lock, flags);
}

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/