Re: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity

From: Yijing Wang
Date: Thu Mar 26 2015 - 02:21:21 EST


On 2015/3/26 13:19, Daniel Axtens wrote:
> Hi Yijing,
>
> Pulled.
>
> I'm now getting build errors:
>
> /scratch/dja/linux-patches/arch/powerpc/kernel/pci-common.c: In function 'pcibios_scan_phb':
> /scratch/dja/linux-patches/arch/powerpc/kernel/pci-common.c:1638:14: error: 'bus' undeclared (first use in this function)
> /scratch/dja/linux-patches/arch/powerpc/kernel/pci-common.c:1638:14: note: each undeclared identifier is reported only once for each function it appears in
>
> That relates to your changes to pcibios_scan_phb:
> - struct pci_bus *bus;
> + struct pci_host_bridge *host;
> clashing with line 1638:
> hose->bus = bus;
> which occurs later in the same unction.
>
> If I fix that, I'll get more errors with lines in that function that
> still reference hose instead of host.
>
> As well as line 1638, there's still big chunks of the function that
> reference hose, for example:
>
> /* Get some IO space for the new PHB */
> pcibios_setup_phb_io_space(hose);
>
> /* Wire up PHB bus resources */
> pcibios_setup_phb_resources(hose, &resources);
>
> hose->busn.start = hose->first_busno;
> hose->busn.end = hose->last_busno;
> hose->busn.flags = IORESOURCE_BUS;
> pci_add_resource(&resources, &hose->busn);
>
> pci_host_ops.pci_ops = hose->ops;
>
>
> Basically, the changes in PowerPC need to be quite a bit more through
> just to get the changes to build.
>
> I'm keen to work on simplifying PCI code in PowerPC, but at this point,
> it will need a lot more work before it's ready to go in.

Hi Daniel, I'm really so sorry about that, I will update it today.

Thanks!
Yijing.

>
> Regards,
> Daniel
>
>
> On Thu, 2015-03-26 at 09:17 +0800, Yijing Wang wrote:
>> On 2015/3/26 6:13, Daniel Axtens wrote:
>>> Hi Yijing,
>>>
>>> I wasn't quite sure I understood your comments, so I was trying to apply
>>> your patch series and test it, but patch 3 doesn't apply cleanly to
>>> 4.0-rc5 or master. Can you respin the series?
>>
>> Hi Daniel,
>> Could you pull the series from Bjorn's git tree ? The URL is
>> https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8
>>
>> Thanks!
>> Yijing.
>>
>>>
>>> Thanks,
>>> Daniel
>>>
>>>
>>>> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge,
>>>> which would hold the common host information, for example, pci domain is common info for
>>>> pci host bridge, this series saved domain in pci_host_bridge, then we no need to
>>>> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr().
>>>> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform
>>>> interface, I think use the common interface would be better.
>>>>
>>>>>> +
>>>>>> + /* Get probe mode and perform scan */
>>>>>> + if (hose->dn && ppc_md.pci_probe_mode)
>>>>>> + mode = ppc_md.pci_probe_mode(bus);
>>>>>> +
>>>>>> + pr_debug(" probe mode: %d\n", mode);
>>>>>> + if (mode == PCI_PROBE_DEVTREE)
>>>>>> + of_scan_bus(hose->dn, bus);
>>>>>> +
>>>>>> + if (mode == PCI_PROBE_NORMAL) {
>>>>>> + pci_bus_update_busn_res_end(bus, 255);
>>>>>> + hose->last_busno = pci_scan_child_bus(bus);
>>>>>> + pci_bus_update_busn_res_end(bus, hose->last_busno);
>>>>>> + }
>>>>>> +
>>>>>> + return pci_bus_child_max_busnr(bus);
>>>>>> +}
>>>>>> +
>>>>> I'm having trouble convincing myself that this patch covers every
>>>>> variation within our PCI implementations. In particular, there's a
>>>>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost
>>>>> identical to this function. Does that implementation need to be cleaned
>>>>> up and replaced with this function too?
>>>>>
>>>>
>>>> This is a pci_host_bridge_ops hook function, which would be called in
>>>> PCI core, and after applied this series, we only need to call pci_scan_host_bridge()
>>>> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(),
>>>> it's not the redundant code.
>>>>
>>>>>
>>>>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose)
>>>>>> ppc_md.pcibios_fixup_phb(hose);
>>>>>>
>>>>>> /* Configure PCI Express settings */
>>>>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
>>>>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) {
>>>>>> struct pci_bus *child;
>>>>>> - list_for_each_entry(child, &bus->children, node)
>>>>>> + list_for_each_entry(child, &host->bus->children, node)
>>>>>> pcie_bus_configure_settings(child);
>>>>>> }
>>>>>> }
>>>>> Two things: Firstly, the function uses hose throughout, not host.
>>>>> Secondly, you're not deleting the bus variable: what's the purpose of
>>>>> this change?
>>>>
>>>> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver,
>>>> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify
>>>> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices
>>>> during PCI enumeration.
>>>>
>>>>>
>>>>> Regards,
>>>>> Daniel
>>>>>
>>>>
>>>>
>>>
>>
>>
>


--
Thanks!
Yijing

--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html