[PATCH 2/2] hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k

From: Pali RohÃr
Date: Sat Mar 28 2015 - 06:25:58 EST


This patch splits CONFIG_I8K compile option to SENSORS_DELL_SMM and CONFIG_I8K.
Option SENSORS_DELL_SMM is now used to enable compilation of dell-smm-hwmon
driver and old CONFIG_I8K option to enable /proc/i8k interface in driver.

So this change allows to compile dell-smm-hwmon driver without legacy /proc/i8k
interface which is needed only for old Dell Inspirion models or for userspace
i8kutils package.

For backward compatibility when CONFIG_I8K is enabled then also SENSORS_DELL_SMM
is enabled and so driver dell-smm-hwmon (with /proc/i8k) is compiled.

Signed-off-by: Pali RohÃr <pali.rohar@xxxxxxxxx>
---
arch/x86/Kconfig | 25 +++++++++----------------
drivers/hwmon/Kconfig | 11 +++++++++++
drivers/hwmon/Makefile | 2 +-
drivers/hwmon/dell-smm-hwmon.c | 20 ++++++++++++++++----
4 files changed, 37 insertions(+), 21 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b7d31ca..8d0266b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1063,24 +1063,17 @@ config TOSHIBA
Say N otherwise.

config I8K
- tristate "Dell laptop support"
- select HWMON
+ bool "Dell i8k legacy laptop support"
+ select SENSORS_DELL_SMM
---help---
- This adds a driver to safely access the System Management Mode
- of the CPU on the Dell Inspiron 8000. The System Management Mode
- is used to read cpu temperature and cooling fan status and to
- control the fans on the I8K portables.
+ This options enables legacy /proc/i8k userspace interface in
+ dell-smm-hwmon driver. Character file /proc/i8k reports power and
+ hotkey status on old Dell laptops (like Dell Inspiron 8000) via
+ System Management Mode provided by Dell BIOS. This /proc/i8k interface
+ is also used by userspace package i8kutils to control laptop fans.

- This driver has been tested only on the Inspiron 8000 but it may
- also work with other Dell laptops. You can force loading on other
- models by passing the parameter `force=1' to the module. Use at
- your own risk.
-
- For information on utilities to make use of this driver see the
- I8K Linux utilities web site at:
- <http://people.debian.org/~dz/i8k/>
-
- Say Y if you intend to run this kernel on a Dell Inspiron 8000.
+ Say Y if you intend to run this kernel on old Dell laptops or want to
+ use userspace package i8kutils.
Say N otherwise.

config X86_REBOOTFIXUPS
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 110fade..86eeb7d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1703,6 +1703,17 @@ config SENSORS_ULTRA45
This driver provides support for the Ultra45 workstation environmental
sensors.

+config SENSORS_DELL_SMM
+ tristate "Dell laptop SMM BIOS hwmon driver"
+ depends ON X86
+ ---help---
+ This hwmon driver adds support for reporting temperature of different
+ sensors and controls the fans on Dell laptops via System Management
+ Mode provided by Dell BIOS.
+
+ When option I8K is also enabled this driver provides legacy /proc/i8k
+ userspace interface for i8kutils package.
+
if ACPI

comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 1c3e458..9eec614 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -155,7 +155,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
-obj-$(CONFIG_I8K) += dell-smm-hwmon.o
+obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o

obj-$(CONFIG_PMBUS) += pmbus/

diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 2b04e4f..e9661dc 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -81,7 +81,7 @@ static uint i8k_fan_max = I8K_FAN_HIGH;

MODULE_AUTHOR("Massimo Dal Zotto (dz@xxxxxxxxxx)");
MODULE_AUTHOR("Pali RohÃr <pali.rohar@xxxxxxxxx>");
-MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
+MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("i8k");

@@ -93,6 +93,7 @@ static bool ignore_dmi;
module_param(ignore_dmi, bool, 0);
MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");

+#ifdef CONFIG_I8K
static bool restricted;
module_param(restricted, bool, 0);
MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
@@ -100,6 +101,7 @@ MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
static bool power_status;
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+#endif

static uint fan_mult;
module_param(fan_mult, uint, 0);
@@ -109,6 +111,7 @@ static uint fan_max;
module_param(fan_max, uint, 0);
MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");

+#ifdef CONFIG_I8K
static int i8k_open_fs(struct inode *inode, struct file *file);
static long i8k_ioctl(struct file *, unsigned int, unsigned long);

@@ -120,6 +123,7 @@ static const struct file_operations i8k_fops = {
.release = single_release,
.unlocked_ioctl = i8k_ioctl,
};
+#endif

struct smm_regs {
unsigned int eax;
@@ -220,6 +224,7 @@ out:
return rc;
}

+#ifdef CONFIG_I8K
/*
* Read the Fn key status.
*/
@@ -258,6 +263,7 @@ static int i8k_get_power_status(void)

return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
}
+#endif

/*
* Read the fan status.
@@ -378,6 +384,7 @@ static int i8k_get_dell_signature(int req_fn)
return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1;
}

+#ifdef CONFIG_I8K
static int
i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
{
@@ -525,6 +532,7 @@ static int i8k_open_fs(struct inode *inode, struct file *file)
{
return single_open(file, i8k_proc_show, NULL);
}
+#endif


/*
@@ -974,17 +982,17 @@ static int __init i8k_probe(void)

static int __init i8k_init(void)
{
- struct proc_dir_entry *proc_i8k;
int err;

/* Are we running on an supported laptop? */
if (i8k_probe())
return -ENODEV;

+#ifdef CONFIG_I8K
/* Register the proc entry */
- proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops);
- if (!proc_i8k)
+ if (!proc_create("i8k", 0, NULL, &i8k_fops))
return -ENOENT;
+#endif

err = i8k_init_hwmon();
if (err)
@@ -993,14 +1001,18 @@ static int __init i8k_init(void)
return 0;

exit_remove_proc:
+#ifdef CONFIG_I8K
remove_proc_entry("i8k", NULL);
+#endif
return err;
}

static void __exit i8k_exit(void)
{
hwmon_device_unregister(i8k_hwmon_dev);
+#ifdef CONFIG_I8K
remove_proc_entry("i8k", NULL);
+#endif
}

module_init(i8k_init);
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/