[PATCH v5 2/2] watchdog: add watchdog_exclude sysctl to assist nohz

[cmetcalf]

From: Chris Metcalf <cmetcalf@xxxxxxxxxx>

Change the default behavior of watchdog so it only runs on the
housekeeping cores when nohz_full is enabled at build and boot time.

Allow modifying the set of cores the watchdog is currently running
on with a new kernel.watchdog_exclude sysctl.

Signed-off-by: Chris Metcalf <cmetcalf@xxxxxxxxxx>
---
 Documentation/lockup-watchdogs.txt |  6 ++++++
 Documentation/sysctl/kernel.txt    |  9 +++++++++
 include/linux/nmi.h                |  3 +++
 kernel/sysctl.c                    |  7 +++++++
 kernel/watchdog.c                  | 33 +++++++++++++++++++++++++++++++++
 5 files changed, 58 insertions(+)

diff --git a/Documentation/lockup-watchdogs.txt b/Documentation/lockup-watchdogs.txt
index ab0baa692c13..4f86aec1d69d 100644
--- a/Documentation/lockup-watchdogs.txt
+++ b/Documentation/lockup-watchdogs.txt
@@ -61,3 +61,9 @@ As explained above, a kernel knob is provided that allows
 administrators to configure the period of the hrtimer and the perf
 event. The right value for a particular environment is a trade-off
 between fast response to lockups and detection overhead.
+
+By default, the watchdog runs on all online cores.  However, on a
+kernel configured with NO_HZ_FULL, by default the watchdog runs only
+on the housekeeping cores, not the cores specified in the "nohz_full"
+boot argument.  In either case, the set of cores excluded from running
+the watchdog may be adjusted via the kernel.watchdog_exclude sysctl.
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index c831001c45f1..799a1fee3f26 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -923,6 +923,15 @@ and nmi_watchdog.
 
 ==============================================================
 
+watchdog_exclude:
+
+This value can be used to control on which cpus the watchdog is
+prohibited from running.  The default exclude mask is empty, but if
+NO_HZ_FULL is enabled in the kernel config, and cores are specified
+with the nohz_full= boot argument, those cores are excluded by default.
+
+==============================================================
+
 watchdog_thresh:
 
 This value can be used to control the frequency of hrtimer and NMI
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 3d46fb4708e0..5094386b4fb1 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -67,6 +67,7 @@ extern int nmi_watchdog_enabled;
 extern int soft_watchdog_enabled;
 extern int watchdog_user_enabled;
 extern int watchdog_thresh;
+extern unsigned long *watchdog_exclude_mask_bits;
 extern int sysctl_softlockup_all_cpu_backtrace;
 struct ctl_table;
 extern int proc_watchdog(struct ctl_table *, int ,
@@ -77,6 +78,8 @@ extern int proc_soft_watchdog(struct ctl_table *, int ,
 			      void __user *, size_t *, loff_t *);
 extern int proc_watchdog_thresh(struct ctl_table *, int ,
 				void __user *, size_t *, loff_t *);
+extern int proc_watchdog_exclude(struct ctl_table *, int,
+				 void __user *, size_t *, loff_t *);
 #endif
 
 #ifdef CONFIG_HAVE_ACPI_APEI_NMI
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 2082b1a88fb9..b934a4a01f0a 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -881,6 +881,13 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 	{
+		.procname	= "watchdog_exclude",
+		.data		= &watchdog_exclude_mask_bits,
+		.maxlen		= NR_CPUS,
+		.mode		= 0644,
+		.proc_handler	= proc_watchdog_exclude,
+	},
+	{
 		.procname	= "softlockup_panic",
 		.data		= &softlockup_panic,
 		.maxlen		= sizeof(int),
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index f2be11ab7e08..3f4fbb208437 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -19,6 +19,7 @@
 #include <linux/sysctl.h>
 #include <linux/smpboot.h>
 #include <linux/sched/rt.h>
+#include <linux/tick.h>
 
 #include <asm/irq_regs.h>
 #include <linux/kvm_para.h>
@@ -56,6 +57,8 @@ int __read_mostly sysctl_softlockup_all_cpu_backtrace;
 #else
 #define sysctl_softlockup_all_cpu_backtrace 0
 #endif
+static cpumask_var_t watchdog_exclude_mask;
+unsigned long *watchdog_exclude_mask_bits;
 
 static int __read_mostly watchdog_running;
 static u64 __read_mostly sample_period;
@@ -841,12 +844,42 @@ out:
 	mutex_unlock(&watchdog_proc_mutex);
 	return err;
 }
+
+int proc_watchdog_exclude(struct ctl_table *table, int write,
+			  void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	int err;
+
+	mutex_lock(&watchdog_proc_mutex);
+	err = proc_do_large_bitmap(table, write, buffer, lenp, ppos);
+	if (!err && write && watchdog_enabled && watchdog_thresh) {
+		watchdog_disable_all_cpus();
+		watchdog_enable_all_cpus();
+	}
+	mutex_unlock(&watchdog_proc_mutex);
+	return err;
+}
+
 #endif /* CONFIG_SYSCTL */
 
 void __init lockup_detector_init(void)
 {
 	set_sample_period();
 
+	alloc_bootmem_cpumask_var(&watchdog_exclude_mask);
+	watchdog_threads.exclude_mask = watchdog_exclude_mask;
+
+#ifdef CONFIG_NO_HZ_FULL
+	if (!cpumask_empty(tick_nohz_full_mask))
+		pr_info("Disabling watchdog on nohz_full cores by default\n");
+	cpumask_copy(watchdog_exclude_mask, tick_nohz_full_mask);
+#else
+	cpumask_clear(watchdog_exclude_mask);
+#endif
+
+	/* The sysctl API requires a variable holding a pointer to the mask. */
+	watchdog_exclude_mask_bits = cpumask_bits(watchdog_exclude_mask);
+
 	if (watchdog_enabled)
 		watchdog_enable_all_cpus();
 }
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/