Re: [PATCH 1/2] Input: atmel_mxt_ts - Implement support for T100 touch object

From: Dmitry Torokhov
Date: Mon Apr 06 2015 - 16:10:25 EST


Hi Javier,

On Tue, Mar 17, 2015 at 03:00:45PM +0100, Javier Martinez Canillas wrote:
> From: Nick Dyer <nick.dyer@xxxxxxxxxxx>
>
> Add support for the new T100 object which replaces the previous
> T9 multitouch touchscreen object in recent maXTouch devices.
> T100 provides improved reporting with selectable auxiliary
> information, and a type field for hover/stylus/glove reporting.
>
> The hovering finger support was based on Chung-Yih's work in
> the ChromiumOS downstream kernel:
>
> https://chromium-review.googlesource.com/#/c/219280/
>
> Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
> Acked-by: Yufeng Shen <miletus@xxxxxxxxxxxx>
> [javier: Factor out T9 and T100 init functions and rework hover support]
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 323 +++++++++++++++++++++++++++++--
> 1 file changed, 302 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 95ee92a91bd2..749371761669 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -79,6 +79,7 @@
> #define MXT_SPT_DIGITIZER_T43 43
> #define MXT_SPT_MESSAGECOUNT_T44 44
> #define MXT_SPT_CTECONFIG_T46 46
> +#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
>
> /* MXT_GEN_MESSAGE_T5 object */
> #define MXT_RPTID_NOMSG 0xff
> @@ -185,6 +186,36 @@ struct t9_range {
> #define MXT_RESET_VALUE 0x01
> #define MXT_BACKUP_VALUE 0x55
>
> +/* T100 Multiple Touch Touchscreen */
> +#define MXT_T100_CTRL 0
> +#define MXT_T100_CFG1 1
> +#define MXT_T100_TCHAUX 3
> +#define MXT_T100_XRANGE 13
> +#define MXT_T100_YRANGE 24
> +
> +#define MXT_T100_CFG_SWITCHXY (1 << 5)
> +
> +#define MXT_T100_TCHAUX_VECT (1 << 0)
> +#define MXT_T100_TCHAUX_AMPL (1 << 1)
> +#define MXT_T100_TCHAUX_AREA (1 << 2)
> +
> +#define MXT_T100_DETECT (1 << 7)

I'll change these to BIT(x).

> +#define MXT_T100_TYPE_MASK 0x70
> +
> +enum t100_type {
> + MXT_T100_TYPE_FINGER = 1,
> + MXT_T100_TYPE_PASSIVE_STYLUS = 2,
> + MXT_T100_TYPE_HOVERING_FINGER = 4,
> + MXT_T100_TYPE_GLOVE = 5,
> + MXT_T100_TYPE_LARGE_TOUCH = 6,
> +};
> +
> +#define MXT_DISTANCE_ACTIVE_TOUCH 0
> +#define MXT_DISTANCE_HOVERING 1
> +
> +#define MXT_TOUCH_MAJOR_DEFAULT 1
> +#define MXT_PRESSURE_DEFAULT 1
> +
> /* Delay times */
> #define MXT_BACKUP_TIME 50 /* msec */
> #define MXT_RESET_TIME 200 /* msec */
> @@ -244,6 +275,9 @@ struct mxt_data {
> unsigned int max_y;
> bool in_bootloader;
> u16 mem_size;
> + u8 t100_aux_ampl;
> + u8 t100_aux_area;
> + u8 t100_aux_vect;
> u8 max_reportid;
> u32 config_crc;
> u32 info_crc;
> @@ -253,6 +287,7 @@ struct mxt_data {
> bool update_input;
> u8 last_message_count;
> u8 num_touchids;
> + u8 multitouch;
>
> /* Cached parameters from object table */
> u16 T5_address;
> @@ -264,6 +299,8 @@ struct mxt_data {
> u8 T9_reportid_max;
> u8 T19_reportid;
> u16 T44_address;
> + u8 T100_reportid_min;
> + u8 T100_reportid_max;
>
> /* for fw update in bootloader */
> struct completion bl_completion;
> @@ -771,6 +808,108 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
> data->update_input = true;
> }
>
> +static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
> +{
> + struct device *dev = &data->client->dev;
> + struct input_dev *input_dev = data->input_dev;
> + int id;
> + u8 status;
> + u8 type = 0;
> + int x;
> + int y;
> + int distance = 0;
> + int tool = 0;
> + u8 major = 0;
> + u8 pressure = 0;
> + u8 orientation = 0;
> +
> + id = message[0] - data->T100_reportid_min - 2;
> +
> + /* ignore SCRSTATUS events */
> + if (id < 0)
> + return;
> +
> + status = message[1];
> + x = (message[3] << 8) | message[2];
> + y = (message[5] << 8) | message[4];

This looks like job for get_unaligned_le16().

> +
> + if (status & MXT_T100_DETECT) {
> + type = (status & MXT_T100_TYPE_MASK) >> 4;
> +
> + switch (type) {
> + case MXT_T100_TYPE_HOVERING_FINGER:
> + tool = MT_TOOL_FINGER;
> + distance = MXT_DISTANCE_HOVERING;
> +
> + if (data->t100_aux_vect)
> + orientation = message[data->t100_aux_vect];
> +
> + break;
> + case MXT_T100_TYPE_FINGER:
> + case MXT_T100_TYPE_GLOVE:
> + tool = MT_TOOL_FINGER;
> + distance = MXT_DISTANCE_ACTIVE_TOUCH;
> +
> + if (data->t100_aux_area)
> + major = message[data->t100_aux_area];
> +
> + if (data->t100_aux_ampl)
> + pressure = message[data->t100_aux_ampl];
> +
> + if (data->t100_aux_vect)
> + orientation = message[data->t100_aux_vect];
> +
> + break;
> + case MXT_T100_TYPE_PASSIVE_STYLUS:
> + tool = MT_TOOL_PEN;
> +
> + /* Passive stylus is reported with size zero so
> + * hardcode */
> + major = MXT_TOUCH_MAJOR_DEFAULT;
> +
> + if (data->t100_aux_ampl)
> + pressure = message[data->t100_aux_ampl];
> +
> + break;
> + case MXT_T100_TYPE_LARGE_TOUCH:
> + /* Ignore suppressed touch */
> + break;
> + default:
> + dev_dbg(dev, "Unexpected T100 type\n");
> + return;
> + }
> + }
> +
> + /*
> + * Values reported should be non-zero if tool is touching the
> + * device
> + */
> + if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
> + pressure = MXT_PRESSURE_DEFAULT;
> +
> + input_mt_slot(input_dev, id);
> +
> + if (status & MXT_T100_DETECT) {
> + dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
> + id, type, x, y, major, pressure, orientation);
> +
> + input_mt_report_slot_state(input_dev, tool, 1);
> + input_report_abs(input_dev, ABS_MT_POSITION_X, x);
> + input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
> + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
> + input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
> + input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
> + input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
> + } else {
> + dev_dbg(dev, "[%u] release\n", id);
> +
> + /* close out slot */
> + input_mt_report_slot_state(input_dev, 0, 0);
> + }
> +
> + data->update_input = true;
> +}
> +
> static int mxt_proc_message(struct mxt_data *data, u8 *message)
> {
> u8 report_id = message[0];
> @@ -789,6 +928,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
> } else if (report_id >= data->T9_reportid_min
> && report_id <= data->T9_reportid_max) {
> mxt_proc_t9_message(data, message);
> + } else if (report_id >= data->T100_reportid_min
> + && report_id <= data->T100_reportid_max) {
> + mxt_proc_t100_message(data, message);
> } else if (report_id == data->T19_reportid) {
> mxt_input_button(data, message);
> data->update_input = true;
> @@ -1411,6 +1553,8 @@ static void mxt_free_object_table(struct mxt_data *data)
> data->T9_reportid_max = 0;
> data->T19_reportid = 0;
> data->T44_address = 0;
> + data->T100_reportid_min = 0;
> + data->T100_reportid_max = 0;
> data->max_reportid = 0;
> }
>
> @@ -1487,6 +1631,7 @@ static int mxt_get_object_table(struct mxt_data *data)
> data->T7_address = object->start_address;
> break;
> case MXT_TOUCH_MULTI_T9:
> + data->multitouch = MXT_TOUCH_MULTI_T9;
> data->T9_reportid_min = min_id;
> data->T9_reportid_max = max_id;
> data->num_touchids = object->num_report_ids
> @@ -1498,6 +1643,13 @@ static int mxt_get_object_table(struct mxt_data *data)
> case MXT_SPT_GPIOPWM_T19:
> data->T19_reportid = min_id;
> break;
> + case MXT_TOUCH_MULTITOUCHSCREEN_T100:
> + data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
> + data->T100_reportid_min = min_id;
> + data->T100_reportid_max = max_id;
> + /* first two report IDs reserved */
> + data->num_touchids = object->num_report_ids - 2;
> + break;
> }
>
> end_address = object->start_address
> @@ -1582,10 +1734,88 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
> return 0;
> }
>
> +static int mxt_read_t100_config(struct mxt_data *data)
> +{
> + struct i2c_client *client = data->client;
> + int error;
> + struct mxt_object *object;
> + u16 range_x, range_y;
> + u8 cfg, tchaux;
> + u8 aux;
> +
> + object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
> + if (!object)
> + return -EINVAL;
> +
> + error = __mxt_read_reg(client,
> + object->start_address + MXT_T100_XRANGE,
> + sizeof(range_x), &range_x);
> + if (error)
> + return error;
> +
> + le16_to_cpus(range_x);

Needs to be "le16_to_cpus(&range_x);" - note "&" or it will likely fail
compilation on big endians, or won't work right there.

Applied, thank you.

--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/