Re: [PATCH v3 1/3] iio: configfs: Add configfs support to IIO

From: Jonathan Cameron
Date: Sat Apr 18 2015 - 15:30:23 EST


On 15/04/15 23:15, Octavian Purdila wrote:
> On Wed, Apr 15, 2015 at 2:34 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>> On 15/04/15 21:58, Octavian Purdila wrote:
>>> On Sun, Apr 12, 2015 at 8:59 AM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>>>> On 10/04/15 14:43, Daniel Baluta wrote:
>>>>> On Thu, Apr 9, 2015 at 8:18 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>>>>>> On 08/04/15 14:30, Daniel Baluta wrote:
>>>>>>> On Mon, Apr 6, 2015 at 5:18 PM, Daniel Baluta <daniel.baluta@xxxxxxxxx> wrote:
>>>>>>>> This module is the core of IIO configfs. It creates the "iio" subsystem under
>>>>>>>> configfs mount point root, with one default group for "triggers".
>>>>>>>>
>>>>>>>> It offers basic interface for registering software trigger types. Next patches
>>>>>>>> will add "hrtimer" and "sysfs" trigger types. To add a new trigger type we must
>>>>>>>> create a new kernel module which implements iio_configfs_trigger.h interface.
>>>>>>>>
>>>>>>>> See Documentation/iio/iio_configfs.txt for more details on how configfs
>>>>>>>> support for IIO works.
>>>>>>>>
>>>>>>>> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx>
>>>>>>>
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I also need your feedback on the following problem.
>>>>>>>
>>>>>>> We would like to be able to create hrtimer triggers from within
>>>>>>> a kernel module. There are cases where we don't have an interrupt
>>>>>>> pin or the interrupt pin is not connected, and we would like
>>>>>>> that applications to run unmodified with these types of sensors too.
>>>>>> A reasonable aim perhaps, as opposed to locally implemented polling
>>>>>> all over the place (which should definitely not happen).
>>>>>
>>>>> Yes, exactly! :)
>>>> I'm actually beginning to have my doubts about whether my initial
>>>> response here was right. Given your use cases and the complexity
>>>> of matching frequencies, I think you are almost always better
>>>> off implementing it in the drivers themselves (which can decide
>>>> if there is new data or not).
>>>
>>> I agree. Although I think having some helper functions in IIO core
>>> should help keep the driver modifications to a minimum.
>>>
>>>>>
>>>>>>
>>>>>> An alternative the zio guys used was to create timer
>>>>>> based triggers on the fly purely based on them being requested
>>>>>> (with an appropriate name IIRC)... Doesn't quite solve your
>>>>>> problem though as still needs userspace changes.
>>>>>>>
>>>>>>> We will split the current design into 3 parts:
>>>>>>>
>>>>>>> (1) IIO trigger handling generic part, which offers an API
>>>>>>> to register/unregister/get a reference to a trigger type
>>>>>>>
>>>>>>> (2) IIO configfs part that gets a reference to a trigger type and
>>>>>>> handles user requests to create/destroy a trigger.
>>>>>>>
>>>>>>> (3) IIO hrtimer driver that use the API at (1) for registering
>>>>>>> / deregistering a trigger type.
>>>>>>>
>>>>>>> Then, each driver in the case that it doesn't have a "real" trigger,
>>>>>>> will get a reference to a "hrtimer" trigger type and create
>>>>>>> a new "hrtimer" trigger.
>>>>>>>
>>>>>>> Does this look good to you? This could be easily done from
>>>>>>> userspace, but we will need to modify our userspace applications.
>>>>>> My initial thought is this really is a job for userspace, as should
>>>>>> be in most cases connecting up the device specific trigger as well
>>>>>> (as it's not always the right thing to use).
>>>>>>
>>>>>> In the general case it is far from obvious that an hrtimer is the
>>>>>> right option. Many usecases would be better off with a sysfs trigger
>>>>>> or even running off a different interrupt based trigger entirely.
>>>>>>>
>>>>>>> Also, handling sampling_frequency/delay would be transparent to
>>>>>>> applications if we provide this in kernel API.
>>>>>> Not really as sampling frequency in this case should only be an
>>>>>> attribute of the trigger, not the device. We only really allow
>>>>>> it for the device rather than always the triggers on the basis
>>>>>> that it has impacts on other device elements (events etc).
>>>>>
>>>>> Well, if the trigger is directly created from the driver then we will
>>>>> have a reference to a function that sets its delay.
>>>>>
>>>>> Each time the user sets the sampling frequency for the device
>>>>> with hit write_raw and there on IIO_CHAN_INFO_SAMP_FREQ
>>>>> case we also call set_delay(). Thus we always have have device
>>>>> sampling frequency in sync with trigger delay.
>>>>>
>>>>> I know this sounds crazy :) and I don't like it. I am not sure how
>>>>> to guarantee that device frequency is always in sync with trigger
>>>>> delay.
>>>> You can't that I can see. Hence you've convinced me this is a bad
>>>> idea.
>>>
>>> I agree we can't accurately synchronize the device frequency with the
>>> trigger frequency, but I think we can get it do a good enough level. I
>>> also see no difference in accuracy in doing it from userspace or from
>>> the driver itself.
>>>
>>> Why do you think it is a bad idea to synchronize the trigger sample
>>> frequency from the device sample frequency handler? I think that if we
>>> want to provide the hrtimer trigger from the driver itself, we should
>>> do this as well, otherwise there is no real gain to userspace.
>>>
>> You will get beating problems. So once in a while you'll either miss
>> a reading or you'll get a bonus one.
>>
>> The point about doing it in the driver is that you actually poll at a
>> higher frequency, but only fire a trigger if there is something there
>> (by reading the dataready register or equivalent).
>>
>> Thus your trigger acts more or less the same as a wired interrupt.
>> You can't do this with an external hrtimer trigger.
>
> Polling will have a large impact on power. I know that some people
> will care more about saving power and that is why I think its worth
> having the external hrtimer trigger option.
>
Two different use cases...

Either you are interested in 'faking' the data ready signal, in which case polling
is the way to go as nothing else will get you there. Note that ranged sleeps can be
used to limit the power usage pain.

or you are interested in much lower frequency sampling in which case you use
an hrtimer trigger, but run it at way below the sample rate. You will always
get new data, but there is no control of when exactly that data was grabbed
and you will loose samples.

The first was what I thought we were discussing...

Any attempt to synchronize timing is a non starter as it will beat as any two
similar frequencies will so you will loose data.

J
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/