Re: [PATCH] power: axp288_charger: axp288 charger driver

From: Lee Jones
Date: Wed Apr 29 2015 - 04:24:39 EST

Next message: Sudip Mukherjee: "[PATCH] MAINTAINERS: remove website for paride"
Previous message: Lee Jones: "Re: [PATCH v1 3/3] mfd: Add support for Intel Sunrisepoint LPSS devices"
In reply to: Ramakrishna Pallala: "[PATCH] power: axp288_charger: axp288 charger driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 29 Apr 2015, Ramakrishna Pallala wrote:

> This patch adds new power supply charger driver support
> for X-Power AXP288 PMIC integrated charger.
>
> This driver interfaces with the axp20x mfd driver as a cell
> and listens to extcon cable events for setting up charging.
>
> Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@xxxxxxxxx>
> ---
> drivers/power/Kconfig | 7 +
> drivers/power/Makefile | 1 +
> drivers/power/axp288_charger.c | 936 ++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 7 +

For MFD:
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>

> 4 files changed, 951 insertions(+)
> create mode 100644 drivers/power/axp288_charger.c
>
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 4091fb0..c7d7e8b 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -204,6 +204,13 @@ config CHARGER_DA9150
> This driver can also be built as a module. If so, the module will be
> called da9150-charger.
>
> +config AXP288_CHARGER
> + tristate "X-Powers AXP288 Charger"
> + depends on MFD_AXP20X && EXTCON_AXP288
> + help
> + Say yes here to have support X-Power AXP288 power management IC (PMIC)
> + integrated charger.
> +
> config AXP288_FUEL_GAUGE
> tristate "X-Powers AXP288 Fuel Gauge"
> depends on MFD_AXP20X && IIO
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index b7b0181..5acae5f 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -64,3 +64,4 @@ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
> obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
> obj-$(CONFIG_POWER_RESET) += reset/
> obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
> +obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
> diff --git a/drivers/power/axp288_charger.c b/drivers/power/axp288_charger.c
> new file mode 100644
> index 0000000..b8436e9
> --- /dev/null
> +++ b/drivers/power/axp288_charger.c
> @@ -0,0 +1,936 @@
> +/*
> + * axp288_charger.c - X-power AXP288 PMIC Charger driver
> + *
> + * Copyright (C) 2014 Intel Corporation
> + * Author: Ramakrishna Pallala <ramakrishna.pallala@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +#include <linux/workqueue.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/otg.h>
> +#include <linux/notifier.h>
> +#include <linux/power_supply.h>
> +#include <linux/notifier.h>
> +#include <linux/property.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/extcon.h>
> +
> +#define PS_STAT_VBUS_TRIGGER (1 << 0)
> +#define PS_STAT_BAT_CHRG_DIR (1 << 2)
> +#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3)
> +#define PS_STAT_VBUS_VALID (1 << 4)
> +#define PS_STAT_VBUS_PRESENT (1 << 5)
> +
> +#define CHRG_STAT_BAT_SAFE_MODE (1 << 3)
> +#define CHRG_STAT_BAT_VALID (1 << 4)
> +#define CHRG_STAT_BAT_PRESENT (1 << 5)
> +#define CHRG_STAT_CHARGING (1 << 6)
> +#define CHRG_STAT_PMIC_OTP (1 << 7)
> +
> +#define VBUS_ISPOUT_CUR_LIM_MASK 0x03
> +#define VBUS_ISPOUT_CUR_LIM_BIT_POS 0
> +#define VBUS_ISPOUT_CUR_LIM_900MA 0x0 /* 900mA */
> +#define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */
> +#define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */
> +#define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */
> +#define VBUS_ISPOUT_VHOLD_SET_MASK 0x31
> +#define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3
> +#define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */
> +#define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */
> +#define VBUS_ISPOUT_VHOLD_SET_4300MV 0x3 /* 4300mV */
> +#define VBUS_ISPOUT_VBUS_PATH_DIS (1 << 7)
> +
> +#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
> +#define CHRG_CCCV_CC_BIT_POS 0
> +#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
> +#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
> +#define CHRG_CCCV_ITERM_20P (1 << 4) /* 20% of CC */
> +#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
> +#define CHRG_CCCV_CV_BIT_POS 5
> +#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
> +#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
> +#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
> +#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
> +#define CHRG_CCCV_CHG_EN (1 << 7)
> +
> +#define CNTL2_CC_TIMEOUT_MASK 0x3 /* 2 bits */
> +#define CNTL2_CC_TIMEOUT_OFFSET 6 /* 6 Hrs */
> +#define CNTL2_CC_TIMEOUT_LSB_RES 2 /* 2 Hrs */
> +#define CNTL2_CC_TIMEOUT_12HRS 0x3 /* 12 Hrs */
> +#define CNTL2_CHGLED_TYPEB (1 << 4)
> +#define CNTL2_CHG_OUT_TURNON (1 << 5)
> +#define CNTL2_PC_TIMEOUT_MASK 0xC0
> +#define CNTL2_PC_TIMEOUT_OFFSET 40 /* 40 mins */
> +#define CNTL2_PC_TIMEOUT_LSB_RES 10 /* 10 mins */
> +#define CNTL2_PC_TIMEOUT_70MINS 0x3
> +
> +#define CHRG_ILIM_TEMP_LOOP_EN (1 << 3)
> +#define CHRG_VBUS_ILIM_MASK 0xf0
> +#define CHRG_VBUS_ILIM_BIT_POS 4
> +#define CHRG_VBUS_ILIM_100MA 0x0 /* 100mA */
> +#define CHRG_VBUS_ILIM_500MA 0x1 /* 500mA */
> +#define CHRG_VBUS_ILIM_900MA 0x2 /* 900mA */
> +#define CHRG_VBUS_ILIM_1500MA 0x3 /* 1500mA */
> +#define CHRG_VBUS_ILIM_2000MA 0x4 /* 2000mA */
> +#define CHRG_VBUS_ILIM_2500MA 0x5 /* 2500mA */
> +#define CHRG_VBUS_ILIM_3000MA 0x6 /* 3000mA */
> +
> +#define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
> +#define CHRG_VHTFC_45C 0x1F /* 45 DegC */
> +
> +#define BAT_IRQ_CFG_CHRG_DONE (1 << 2)
> +#define BAT_IRQ_CFG_CHRG_START (1 << 3)
> +#define BAT_IRQ_CFG_BAT_SAFE_EXIT (1 << 4)
> +#define BAT_IRQ_CFG_BAT_SAFE_ENTER (1 << 5)
> +#define BAT_IRQ_CFG_BAT_DISCON (1 << 6)
> +#define BAT_IRQ_CFG_BAT_CONN (1 << 7)
> +#define BAT_IRQ_CFG_BAT_MASK 0xFC
> +
> +#define TEMP_IRQ_CFG_QCBTU (1 << 4)
> +#define TEMP_IRQ_CFG_CBTU (1 << 5)
> +#define TEMP_IRQ_CFG_QCBTO (1 << 6)
> +#define TEMP_IRQ_CFG_CBTO (1 << 7)
> +#define TEMP_IRQ_CFG_MASK 0xF0
> +
> +#define FG_CNTL_OCV_ADJ_EN (1 << 3)
> +
> +#define CV_4100MV 4100 /* 4100mV */
> +#define CV_4150MV 4150 /* 4150mV */
> +#define CV_4200MV 4200 /* 4200mV */
> +#define CV_4350MV 4350 /* 4350mV */
> +
> +#define CC_200MA 200 /* 200mA */
> +#define CC_600MA 600 /* 600mA */
> +#define CC_800MA 800 /* 800mA */
> +#define CC_1000MA 1000 /* 1000mA */
> +#define CC_1600MA 1600 /* 1600mA */
> +#define CC_2000MA 2000 /* 2000mA */
> +
> +#define ILIM_100MA 100 /* 100mA */
> +#define ILIM_500MA 500 /* 500mA */
> +#define ILIM_900MA 900 /* 900mA */
> +#define ILIM_1500MA 1500 /* 1500mA */
> +#define ILIM_2000MA 2000 /* 2000mA */
> +#define ILIM_2500MA 2500 /* 2500mA */
> +#define ILIM_3000MA 3000 /* 3000mA */
> +
> +#define AXP288_EXTCON_DEV_NAME "axp288_extcon"
> +
> +#define AXP288_EXTCON_SLOW_CHARGER "SLOW-CHARGER"
> +#define AXP288_EXTCON_DOWNSTREAM_CHARGER "CHARGE-DOWNSTREAM"
> +#define AXP288_EXTCON_FAST_CHARGER "FAST-CHARGER"
> +
> +enum {
> + VBUS_OV_IRQ = 0,
> + CHARGE_DONE_IRQ,
> + CHARGE_CHARGING_IRQ,
> + BAT_SAFE_QUIT_IRQ,
> + BAT_SAFE_ENTER_IRQ,
> + QCBTU_IRQ,
> + CBTU_IRQ,
> + QCBTO_IRQ,
> + CBTO_IRQ,
> + CHRG_INTR_END,
> +};
> +
> +struct axp288_chrg_info {
> + struct platform_device *pdev;
> + struct axp20x_chrg_pdata *pdata;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *regmap_irqc;
> + int irq[CHRG_INTR_END];
> + struct power_supply *psy_usb;
> + struct mutex lock;
> +
> + /* OTG/Host mode */
> + struct {
> + struct work_struct work;
> + struct extcon_specific_cable_nb cable;
> + struct notifier_block id_nb;
> + bool id_short;
> + } otg;
> +
> + /* SDP/CDP/DCP USB charging cable notifications */
> + struct {
> + struct extcon_dev *edev;
> + bool connected;
> + enum power_supply_type chg_type;
> + struct notifier_block nb;
> + struct work_struct work;
> + } cable;
> +
> + int health;
> + int inlmt;
> + int cc;
> + int cv;
> + int max_cc;
> + int max_cv;
> + bool online;
> + bool present;
> + bool enable_charger;
> + bool is_charger_enabled;
> +};
> +
> +static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
> +{
> + u8 reg_val;
> + int ret;
> +
> + if (cc < CHRG_CCCV_CC_OFFSET)
> + cc = CHRG_CCCV_CC_OFFSET;
> + else if (cc > info->max_cc)
> + cc = info->max_cc;
> +
> + reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
> + cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
> + reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;
> +
> + ret = regmap_update_bits(info->regmap,
> + AXP20X_CHRG_CTRL1,
> + CHRG_CCCV_CC_MASK, reg_val);
> + if (ret >= 0)
> + info->cc = cc;
> +
> + return ret;
> +}
> +
> +static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
> +{
> + u8 reg_val;
> + int ret;
> +
> + if (cv <= CV_4100MV) {
> + reg_val = CHRG_CCCV_CV_4100MV;
> + cv = CV_4100MV;
> + } else if (cv <= CV_4150MV) {
> + reg_val = CHRG_CCCV_CV_4150MV;
> + cv = CV_4150MV;
> + } else if (cv <= CV_4200MV) {
> + reg_val = CHRG_CCCV_CV_4200MV;
> + cv = CV_4200MV;
> + } else {
> + reg_val = CHRG_CCCV_CV_4350MV;
> + cv = CV_4350MV;
> + }
> +
> + reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;
> +
> + ret = regmap_update_bits(info->regmap,
> + AXP20X_CHRG_CTRL1,
> + CHRG_CCCV_CV_MASK, reg_val);
> +
> + if (ret >= 0)
> + info->cv = cv;
> +
> + return ret;
> +}
> +
> +static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
> + int inlmt)
> +{
> + int ret;
> + unsigned int val;
> + u8 reg_val;
> +
> + /* Read in limit register */
> + ret = regmap_read(info->regmap, AXP20X_CHRG_BAK_CTRL, &val);
> + if (ret < 0)
> + goto set_inlmt_fail;
> +
> + if (inlmt <= ILIM_100MA) {
> + reg_val = CHRG_VBUS_ILIM_100MA;
> + inlmt = ILIM_100MA;
> + } else if (inlmt <= ILIM_500MA) {
> + reg_val = CHRG_VBUS_ILIM_500MA;
> + inlmt = ILIM_500MA;
> + } else if (inlmt <= ILIM_900MA) {
> + reg_val = CHRG_VBUS_ILIM_900MA;
> + inlmt = ILIM_900MA;
> + } else if (inlmt <= ILIM_1500MA) {
> + reg_val = CHRG_VBUS_ILIM_1500MA;
> + inlmt = ILIM_1500MA;
> + } else if (inlmt <= ILIM_2000MA) {
> + reg_val = CHRG_VBUS_ILIM_2000MA;
> + inlmt = ILIM_2000MA;
> + } else if (inlmt <= ILIM_2500MA) {
> + reg_val = CHRG_VBUS_ILIM_2500MA;
> + inlmt = ILIM_2500MA;
> + } else {
> + reg_val = CHRG_VBUS_ILIM_3000MA;
> + inlmt = ILIM_3000MA;
> + }
> +
> + reg_val = (val & ~CHRG_VBUS_ILIM_MASK)
> + | (reg_val << CHRG_VBUS_ILIM_BIT_POS);
> + ret = regmap_write(info->regmap, AXP20X_CHRG_BAK_CTRL, reg_val);
> + if (ret >= 0)
> + info->inlmt = inlmt;
> + else
> + dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);
> +
> +
> +set_inlmt_fail:
> + return ret;
> +}
> +
> +static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
> + bool enable)
> +{
> + int ret;
> +
> + if (enable)
> + ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
> + VBUS_ISPOUT_VBUS_PATH_DIS, 0);
> + else
> + ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
> + VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);
> +
> + if (ret < 0)
> + dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);
> +
> +
> + return ret;
> +}
> +
> +static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
> + bool enable)
> +{
> + int ret;
> +
> + if (enable)
> + ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
> + CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
> + else
> + ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
> + CHRG_CCCV_CHG_EN, 0);
> + if (ret < 0)
> + dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);
> + else
> + info->is_charger_enabled = enable;
> +
> + return ret;
> +}
> +
> +static int axp288_charger_is_present(struct axp288_chrg_info *info)
> +{
> + int ret, present = 0;
> + unsigned int val;
> +
> + ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
> + if (ret < 0)
> + return ret;
> +
> + if (val & PS_STAT_VBUS_PRESENT)
> + present = 1;
> + return present;
> +}
> +
> +static int axp288_charger_is_online(struct axp288_chrg_info *info)
> +{
> + int ret, online = 0;
> + unsigned int val;
> +
> + ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
> + if (ret < 0)
> + return ret;
> +
> + if (val & PS_STAT_VBUS_VALID)
> + online = 1;
> + return online;
> +}
> +
> +static int axp288_get_charger_health(struct axp288_chrg_info *info)
> +{
> + int ret, pwr_stat, chrg_stat;
> + int health = POWER_SUPPLY_HEALTH_UNKNOWN;
> + unsigned int val;
> +
> + ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
> + if ((ret < 0) || !(val & PS_STAT_VBUS_PRESENT))
> + goto health_read_fail;
> + else
> + pwr_stat = val;
> +
> + ret = regmap_read(info->regmap, AXP20X_PWR_OP_MODE, &val);
> + if (ret < 0)
> + goto health_read_fail;
> + else
> + chrg_stat = val;
> +
> + if (!(pwr_stat & PS_STAT_VBUS_VALID))
> + health = POWER_SUPPLY_HEALTH_DEAD;
> + else if (chrg_stat & CHRG_STAT_PMIC_OTP)
> + health = POWER_SUPPLY_HEALTH_OVERHEAT;
> + else if (chrg_stat & CHRG_STAT_BAT_SAFE_MODE)
> + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
> + else
> + health = POWER_SUPPLY_HEALTH_GOOD;
> +
> +health_read_fail:
> + return health;
> +}
> +
> +static int axp288_charger_usb_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
> + int ret = 0;
> + int scaled_val;
> +
> + mutex_lock(&info->lock);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + scaled_val = min(val->intval, info->max_cc);
> + scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
> + ret = axp288_charger_set_cc(info, scaled_val);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "set charge current failed\n");
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + scaled_val = min(val->intval, info->max_cv);
> + scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
> + ret = axp288_charger_set_cv(info, scaled_val);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "set charge voltage failed\n");
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + mutex_unlock(&info->lock);
> + return ret;
> +}
> +
> +static int axp288_charger_usb_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
> + int ret = 0;
> +
> + mutex_lock(&info->lock);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_PRESENT:
> + /* Check for OTG case first */
> + if (info->otg.id_short) {
> + val->intval = 0;
> + break;
> + }
> + ret = axp288_charger_is_present(info);
> + if (ret < 0)
> + goto psy_get_prop_fail;
> + info->present = ret;
> + val->intval = info->present;
> + break;
> + case POWER_SUPPLY_PROP_ONLINE:
> + /* Check for OTG case first */
> + if (info->otg.id_short) {
> + val->intval = 0;
> + break;
> + }
> + ret = axp288_charger_is_online(info);
> + if (ret < 0)
> + goto psy_get_prop_fail;
> + info->online = ret;
> + val->intval = info->online;
> + break;
> + case POWER_SUPPLY_PROP_HEALTH:
> + val->intval = axp288_get_charger_health(info);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + val->intval = info->cc * 1000;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + val->intval = info->max_cc * 1000;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + val->intval = info->cv * 1000;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + val->intval = info->max_cv * 1000;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
> + val->intval = info->inlmt * 1000;
> + break;
> + default:
> + ret = -EINVAL;
> + goto psy_get_prop_fail;
> + }
> +
> +psy_get_prop_fail:
> + mutex_unlock(&info->lock);
> + return ret;
> +}
> +
> +static int axp288_charger_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + int ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = 1;
> + break;
> + default:
> + ret = 0;
> + }
> +
> + return ret;
> +}
> +
> +static enum power_supply_property axp288_usb_props[] = {
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_TYPE,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
> +};
> +
> +static const struct power_supply_desc axp288_charger_desc = {
> + .name = "axp288_charger",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .properties = axp288_usb_props,
> + .num_properties = ARRAY_SIZE(axp288_usb_props),
> + .get_property = axp288_charger_usb_get_property,
> + .set_property = axp288_charger_usb_set_property,
> + .property_is_writeable = axp288_charger_property_is_writeable,
> +};
> +
> +static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
> +{
> + struct axp288_chrg_info *info = dev;
> + int i;
> +
> + for (i = 0; i < CHRG_INTR_END; i++) {
> + if (info->irq[i] == irq)
> + break;
> + }
> +
> + if (i >= CHRG_INTR_END) {
> + dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
> + return IRQ_NONE;
> + }
> +
> + switch (i) {
> + case VBUS_OV_IRQ:
> + dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
> + break;
> + case CHARGE_DONE_IRQ:
> + dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
> + break;
> + case CHARGE_CHARGING_IRQ:
> + dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
> + break;
> + case BAT_SAFE_QUIT_IRQ:
> + dev_dbg(&info->pdev->dev,
> + "Quit Safe Mode(restart timer) Charging IRQ\n");
> + break;
> + case BAT_SAFE_ENTER_IRQ:
> + dev_dbg(&info->pdev->dev,
> + "Enter Safe Mode(timer expire) Charging IRQ\n");
> + break;
> + case QCBTU_IRQ:
> + dev_dbg(&info->pdev->dev,
> + "Quit Battery Under Temperature(CHRG) INTR\n");
> + break;
> + case CBTU_IRQ:
> + dev_dbg(&info->pdev->dev,
> + "Hit Battery Under Temperature(CHRG) INTR\n");
> + break;
> + case QCBTO_IRQ:
> + dev_dbg(&info->pdev->dev,
> + "Quit Battery Over Temperature(CHRG) INTR\n");
> + break;
> + case CBTO_IRQ:
> + dev_dbg(&info->pdev->dev,
> + "Hit Battery Over Temperature(CHRG) INTR\n");
> + break;
> + default:
> + dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
> + goto out;
> + }
> +
> + power_supply_changed(info->psy_usb);
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static void axp288_charger_extcon_evt_worker(struct work_struct *work)
> +{
> + struct axp288_chrg_info *info =
> + container_of(work, struct axp288_chrg_info, cable.work);
> + int ret, current_limit;
> + bool changed = false;
> + struct extcon_dev *edev = info->cable.edev;
> + bool old_connected = info->cable.connected;
> +
> + /* Determine cable/charger type */
> + if (extcon_get_cable_state(edev, AXP288_EXTCON_SLOW_CHARGER) > 0) {
> + dev_dbg(&info->pdev->dev, "USB SDP charger connected");
> + info->cable.connected = true;
> + info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
> + } else if (extcon_get_cable_state(edev,
> + AXP288_EXTCON_DOWNSTREAM_CHARGER) > 0) {
> + dev_dbg(&info->pdev->dev, "USB CDP charger connected");
> + info->cable.connected = true;
> + info->cable.chg_type = POWER_SUPPLY_TYPE_USB_CDP;
> + } else if (extcon_get_cable_state(edev,
> + AXP288_EXTCON_FAST_CHARGER) > 0) {
> + dev_dbg(&info->pdev->dev, "USB DCP charger connected");
> + info->cable.connected = true;
> + info->cable.chg_type = POWER_SUPPLY_TYPE_USB_DCP;
> + } else {
> + if (old_connected)
> + dev_dbg(&info->pdev->dev, "USB charger disconnected");
> + info->cable.connected = false;
> + info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
> + }
> +
> + /* Cable status changed */
> + if (old_connected != info->cable.connected)
> + changed = true;
> +
> + if (!changed)
> + return;
> +
> + mutex_lock(&info->lock);
> +
> + if (info->is_charger_enabled && !info->cable.connected) {
> + info->enable_charger = false;
> + ret = axp288_charger_enable_charger(info, info->enable_charger);
> + if (ret < 0)
> + dev_err(&info->pdev->dev,
> + "cannot disable charger (%d)", ret);
> +
> + } else if (!info->is_charger_enabled && info->cable.connected) {
> + switch (info->cable.chg_type) {
> + case POWER_SUPPLY_TYPE_USB:
> + current_limit = ILIM_500MA;
> + break;
> + case POWER_SUPPLY_TYPE_USB_CDP:
> + current_limit = ILIM_1500MA;
> + break;
> + case POWER_SUPPLY_TYPE_USB_DCP:
> + current_limit = ILIM_2000MA;
> + break;
> + default:
> + /* Unknown */
> + current_limit = 0;
> + break;
> + }
> +
> + /* Set vbus current limit first, then enable charger */
> + ret = axp288_charger_set_vbus_inlmt(info, current_limit);
> + if (ret < 0) {
> + dev_err(&info->pdev->dev,
> + "error setting current limit (%d)", ret);
> + } else {
> + info->enable_charger = (current_limit > 0);
> + ret = axp288_charger_enable_charger(info,
> + info->enable_charger);
> + if (ret < 0)
> + dev_err(&info->pdev->dev,
> + "cannot enable charger (%d)", ret);
> + }
> + }
> +
> + if (changed)
> + info->health = axp288_get_charger_health(info);
> +
> + mutex_unlock(&info->lock);
> +
> + if (changed)
> + power_supply_changed(info->psy_usb);
> +}
> +
> +static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
> + unsigned long event, void *param)
> +{
> + struct axp288_chrg_info *info =
> + container_of(nb, struct axp288_chrg_info, cable.nb);
> +
> + schedule_work(&info->cable.work);
> +
> + return NOTIFY_OK;
> +}
> +
> +static void axp288_charger_otg_evt_worker(struct work_struct *work)
> +{
> + struct axp288_chrg_info *info =
> + container_of(work, struct axp288_chrg_info, otg.work);
> + int ret;
> +
> + /* Disable VBUS path before enabling the 5V boost */
> + ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "vbus path disable failed\n");
> +}
> +
> +static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
> + unsigned long event, void *param)
> +{
> + struct axp288_chrg_info *info =
> + container_of(nb, struct axp288_chrg_info, otg.id_nb);
> + struct extcon_dev *edev = param;
> + int usb_host = extcon_get_cable_state(edev, "USB-Host");
> +
> + dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
> + usb_host ? "attached" : "detached");
> +
> + /*
> + * Set usb_id_short flag to avoid running charger detection logic
> + * in case usb host.
> + */
> + info->otg.id_short = usb_host;
> + schedule_work(&info->otg.work);
> +
> + return NOTIFY_OK;
> +}
> +
> +static void charger_init_hw_regs(struct axp288_chrg_info *info)
> +{
> + int ret, cc, cv;
> + unsigned int val;
> +
> + /* Program temperature thresholds */
> + ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error init V(LTF-charge)\n");
> +
> + ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error init V(LTF-charge)\n");
> +
> + /* Do not turn-off charger o/p after charge cycle ends */
> + ret = regmap_update_bits(info->regmap,
> + AXP20X_CHRG_CTRL2,
> + CNTL2_CHG_OUT_TURNON, 1);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev,
> + "error setting charger stay on after charging\n");
> +
> + /* Enable interrupts */
> + ret = regmap_update_bits(info->regmap,
> + AXP20X_IRQ2_EN,
> + BAT_IRQ_CFG_BAT_MASK, 1);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error enabling charging IRQs");
> +
> + ret = regmap_update_bits(info->regmap, AXP20X_IRQ3_EN,
> + TEMP_IRQ_CFG_MASK, 1);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error enabling temperature IRQs");
> +
> + /* Setup ending condition for charging to be 10% of I(chrg) */
> + ret = regmap_update_bits(info->regmap,
> + AXP20X_CHRG_CTRL1,
> + CHRG_CCCV_ITERM_20P, 0);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error setting ending condition\n");
> +
> + /* Disable OCV-SOC curve calibration */
> + ret = regmap_update_bits(info->regmap,
> + AXP20X_CC_CTRL,
> + FG_CNTL_OCV_ADJ_EN, 0);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev,
> + "error disabling OCV-SOC calibration\n");
> +
> + /* Init charging current and voltage */
> + info->max_cc = info->pdata->max_cc;
> + info->max_cv = info->pdata->max_cv;
> +
> + /* Read current charge voltage and current limit */
> + ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
> + if (ret < 0) {
> + /* Assume default if cannot read */
> + info->cc = info->pdata->def_cc;
> + info->cv = info->pdata->def_cv;
> + } else {
> + /* Determine charge voltage */
> + cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
> + switch (cv) {
> + case CHRG_CCCV_CV_4100MV:
> + info->cv = CV_4100MV;
> + break;
> + case CHRG_CCCV_CV_4150MV:
> + info->cv = CV_4150MV;
> + break;
> + case CHRG_CCCV_CV_4200MV:
> + info->cv = CV_4200MV;
> + break;
> + case CHRG_CCCV_CV_4350MV:
> + info->cv = CV_4350MV;
> + break;
> + default:
> + info->cv = INT_MAX;
> + break;
> + }
> +
> + /* Determine charge current limit */
> + cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
> + cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
> + info->cc = cc;
> +
> + /* Program default charging voltage and current */
> + cc = min(info->pdata->def_cc, info->max_cc);
> + cv = min(info->pdata->def_cv, info->max_cv);
> +
> + ret = axp288_charger_set_cc(info, cc);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error init cc\n");
> +
> + ret = axp288_charger_set_cv(info, cv);
> + if (ret < 0)
> + dev_warn(&info->pdev->dev, "error init cv\n");
> + }
> +}
> +
> +static int axp288_charger_probe(struct platform_device *pdev)
> +{
> + int ret, i, pirq;
> + struct axp288_chrg_info *info;
> + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> + struct power_supply_config charger_cfg = {};
> +
> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->pdev = pdev;
> + info->regmap = axp20x->regmap;
> + info->regmap_irqc = axp20x->regmap_irqc;
> + info->pdata = pdev->dev.platform_data;
> +
> + if (!info->pdata) {
> + /* TODO: Try ACPI provided pdata via device properties */
> + if (!device_property_present(&pdev->dev,
> + "axp288_charger_data\n"))
> + dev_err(&pdev->dev, "no platform data\n");
> + return -ENODEV;
> + }
> +
> + info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
> + if (info->cable.edev == NULL) {
> + dev_dbg(&pdev->dev, "%s is not ready, probe deferred\n",
> + AXP288_EXTCON_DEV_NAME);
> + return -EPROBE_DEFER;
> + }
> +
> + /* Register for extcon notification */
> + INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
> + info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
> + ret = extcon_register_notifier(info->cable.edev, &info->cable.nb);
> + if (ret) {
> + dev_err(&info->pdev->dev,
> + "failed to register extcon notifier %d\n", ret);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, info);
> + mutex_init(&info->lock);
> +
> + /* Register with power supply class */
> + charger_cfg.drv_data = info;
> + info->psy_usb = power_supply_register(&pdev->dev, &axp288_charger_desc,
> + &charger_cfg);
> + if (IS_ERR(info->psy_usb)) {
> + dev_err(&pdev->dev, "Can't register charger\n");
> + ret = PTR_ERR(info->psy_usb);
> + goto psy_reg_failed;
> + }
> +
> + /* Register for OTG notification */
> + INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
> + info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
> + ret = extcon_register_interest(&info->otg.cable, NULL, "USB-Host",
> + &info->otg.id_nb);
> + if (ret)
> + dev_warn(&pdev->dev, "failed to register otg notifier\n");
> +
> + if (info->otg.cable.edev)
> + info->otg.id_short = extcon_get_cable_state(
> + info->otg.cable.edev, "USB-Host");
> +
> + /* Register charger interrupts */
> + for (i = 0; i < CHRG_INTR_END; i++) {
> + pirq = platform_get_irq(info->pdev, i);
> + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
> + if (info->irq[i] < 0) {
> + dev_warn(&info->pdev->dev,
> + "regmap_irq get irq failed for IRQ %d: %d\n",
> + pirq, info->irq[i]);
> + info->irq[i] = -1;
> + goto intr_reg_failed;
> + }
> + ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
> + NULL, axp288_charger_irq_thread_handler,
> + IRQF_ONESHOT, info->pdev->name, info);
> + if (ret) {
> + dev_warn(&info->pdev->dev,
> + "request irq failed for IRQ %d: %d\n",
> + pirq, info->irq[i]);
> + goto intr_reg_failed;
> + }
> + }
> +
> + charger_init_hw_regs(info);
> +
> + return 0;
> +
> +intr_reg_failed:
> + if (info->otg.cable.edev)
> + extcon_unregister_interest(&info->otg.cable);
> + power_supply_unregister(info->psy_usb);
> +psy_reg_failed:
> + extcon_unregister_notifier(info->cable.edev, &info->cable.nb);
> + return ret;
> +}
> +
> +static int axp288_charger_remove(struct platform_device *pdev)
> +{
> + struct axp288_chrg_info *info = dev_get_drvdata(&pdev->dev);
> +
> + if (info->otg.cable.edev)
> + extcon_unregister_interest(&info->otg.cable);
> +
> + extcon_unregister_notifier(info->cable.edev, &info->cable.nb);
> + power_supply_unregister(info->psy_usb);
> +
> + return 0;
> +}
> +
> +static struct platform_driver axp288_charger_driver = {
> + .probe = axp288_charger_probe,
> + .remove = axp288_charger_remove,
> + .driver = {
> + .name = "axp288_charger",
> + },
> +};
> +
> +module_platform_driver(axp288_charger_driver);
> +
> +MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Xpower AXP288 Charger Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index dfabd6d..f9030df 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -275,4 +275,11 @@ struct axp20x_fg_pdata {
> int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
> };
>
> +struct axp20x_chrg_pdata {
> + int max_cc;
> + int max_cv;
> + int def_cc;
> + int def_cv;
> +};
> +
> #endif /* __LINUX_MFD_AXP20X_H */

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Sudip Mukherjee: "[PATCH] MAINTAINERS: remove website for paride"
Previous message: Lee Jones: "Re: [PATCH v1 3/3] mfd: Add support for Intel Sunrisepoint LPSS devices"
In reply to: Ramakrishna Pallala: "[PATCH] power: axp288_charger: axp288 charger driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]