[PATCH 0/2] get pinctrl more flexible for per pin muxing controllers

From: Ludovic Desroches
Date: Mon May 04 2015 - 04:56:24 EST


Hi,

The way pins, groups and functions are tied is too constraining for some
controllers. It concerns mainly the ones we don't care about groups and
functions, each pin can be muxed to any functions.
The goal of these two patches is too remove some of the constraints.

I have added the prototype of a pin controller and device tree to show the
way I want to use these changes. I couldn't test it on boards using generic
pinconf so I am not sure that I don't break something...


Ludovic Desroches (4):
pinctrl: change function behavior for per pin muxing controllers
pinctrl: introduce complex pin description
pinctrl: rough draft for a future controller
ARM: at91/dt: proto dt

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d4ek_proto.dts | 243 ++++++++++
arch/arm/boot/dts/sama5d4_proto-pinfunc.h | 463 +++++++++++++++++++
arch/arm/boot/dts/sama5d4_proto.dtsi | 716 +++++++++++++++++++++++++++++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinconf-generic.c | 44 +-
drivers/pinctrl/pinctrl-at91-pio4.c | 625 +++++++++++++++++++++++++
drivers/pinctrl/pinmux.c | 58 +--
include/linux/pinctrl/pinctrl.h | 6 +
include/linux/pinctrl/pinmux.h | 3 +
11 files changed, 2134 insertions(+), 36 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-sama5d4ek_proto.dts
create mode 100644 arch/arm/boot/dts/sama5d4_proto-pinfunc.h
create mode 100644 arch/arm/boot/dts/sama5d4_proto.dtsi
create mode 100644 drivers/pinctrl/pinctrl-at91-pio4.c

--
2.2.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/