Re: [PATCH 1/2] gpio / ACPI: Add support for retrieving GpioInt resources from a device

From: Rafael J. Wysocki
Date: Mon May 04 2015 - 19:22:50 EST


On Tuesday, April 28, 2015 06:05:06 PM Mika Westerberg wrote:
> ACPI specification knows two types of GPIOs: GpioIo and GpioInt. The latter
> is used to describe that a given device interrupt line is connected to a
> specific GPIO pin. Typical ACPI _CRS entry for such device looks like
> below:
>
> Name (_CRS, ResourceTemplate ()
> {
> I2cSerialBus (0x004A, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.PCI0.I2C6",
> 0x00, ResourceConsumer)
> GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
> IoRestrictionOutputOnly, "\\_SB.GPO0",
> 0x00, ResourceConsumer)
> {
> 0x004B
> }
> GpioInt (Level, ActiveLow, Shared, PullDefault, 0x0000,
> "\\_SB.GPO0", 0x00, ResourceConsumer)
> {
> 0x004C
> }
> })
>
> Currently drivers need to request a GPIO corresponding to the right GpioInt
> and then translate that to Linux IRQ number. This adds unnecessary lines of
> boiler-plate code.
>
> We can ease this a bit by introducing acpi_dev_gpio_irq_get() analogous to
> of_irq_get(). This function translates given GpioInt resource under the
> device in question to the suitable Linux IRQ number.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

> ---
> drivers/gpio/gpiolib-acpi.c | 29 +++++++++++++++++++++++++++++
> include/linux/acpi.h | 7 +++++++
> 2 files changed, 36 insertions(+)
>
> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
> index d2303d50f561..bff29bb0a3fe 100644
> --- a/drivers/gpio/gpiolib-acpi.c
> +++ b/drivers/gpio/gpiolib-acpi.c
> @@ -514,6 +514,35 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
> return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
> }
>
> +/**
> + * acpi_dev_gpio_irq_get() - Find GpioInt and translate it to Linux IRQ number
> + * @adev: pointer to a ACPI device to get IRQ from
> + * @index: index of GpioInt resource (starting from %0)
> + *
> + * If the device has one or more GpioInt resources, this function can be
> + * used to translate from the GPIO offset in the resource to the Linux IRQ
> + * number.
> + *
> + * Return: Linux IRQ number (>%0) on success, negative errno on failure.
> + */
> +int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
> +{
> + int idx, i;
> +
> + for (i = 0, idx = 0; idx <= index; i++) {
> + struct acpi_gpio_info info;
> + struct gpio_desc *desc;
> +
> + desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
> + if (IS_ERR(desc))
> + break;
> + if (info.gpioint && idx++ == index)
> + return gpiod_to_irq(desc);
> + }
> + return -ENOENT;
> +}
> +EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get);
> +
> static acpi_status
> acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
> u32 bits, u64 *value, void *handler_context,
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index e4da5e35e29c..f57c440642cd 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -721,6 +721,8 @@ static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
> if (adev)
> adev->driver_gpios = NULL;
> }
> +
> +int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index);
> #else
> static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
> const struct acpi_gpio_mapping *gpios)
> @@ -728,6 +730,11 @@ static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
> return -ENXIO;
> }
> static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) {}
> +
> +static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
> +{
> + return -ENXIO;
> +}
> #endif
>
> /* Device properties */
>

--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/