Re: [PATCH 1/4] edac, altera: Generalize driver to use DT Memory size

From: Dinh Nguyen
Date: Wed May 13 2015 - 23:26:02 EST




On 5/13/15 4:49 PM, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
>
> The Arria10 SOC uses a completely different SDRAM controller from the
> earlier CycloneV and ArriaV SoCs. The memory size is calculated in
> the bootloader and passed via the device tree. Using this device
> tree size is more generic than using the register fields to
> calculate the memory size for different SDRAM controllers.
>
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/edac/altera_edac.c | 53 ++++++++++++++++++++++----------------------
> 1 file changed, 26 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
> index 3c4929f..e18a205 100644
> --- a/drivers/edac/altera_edac.c
> +++ b/drivers/edac/altera_edac.c
> @@ -219,36 +219,35 @@ static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
> {}
> #endif
>
> -/* Get total memory size in bytes */
> -static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
> +/* Get total memory size from Open Firmware DTB */
> +static unsigned long get_total_mem(void)
> {
> - u32 size, read_reg, row, bank, col, cs, width;
> + struct device_node *np = NULL;
> + const unsigned int *reg, *reg_end;
> + int len, sw, aw;
> + unsigned long start, size, total_mem;
>
> - if (regmap_read(mc_vbase, DRAMADDRW_OFST, &read_reg) < 0)
> + np = of_find_node_by_type(NULL, "memory");
> + if (!np)
> return 0;
>
> - if (regmap_read(mc_vbase, DRAMIFWIDTH_OFST, &width) < 0)
> - return 0;
> -
> - col = (read_reg & DRAMADDRW_COLBIT_MASK) >>
> - DRAMADDRW_COLBIT_SHIFT;
> - row = (read_reg & DRAMADDRW_ROWBIT_MASK) >>
> - DRAMADDRW_ROWBIT_SHIFT;
> - bank = (read_reg & DRAMADDRW_BANKBIT_MASK) >>
> - DRAMADDRW_BANKBIT_SHIFT;
> - cs = (read_reg & DRAMADDRW_CSBIT_MASK) >>
> - DRAMADDRW_CSBIT_SHIFT;
> -
> - /* Correct for ECC as its not addressible */
> - if (width == DRAMIFWIDTH_32B_ECC)
> - width = 32;
> - if (width == DRAMIFWIDTH_16B_ECC)
> - width = 16;
> -
> - /* calculate the SDRAM size base on this info */
> - size = 1 << (row + bank + col);
> - size = size * cs * (width / 8);
> - return size;
> + aw = of_n_addr_cells(np);
> + sw = of_n_size_cells(np);
> + reg = (const unsigned int *)of_get_property(np, "reg", &len);
> + reg_end = reg + (len / sizeof(u32));
> +
> + total_mem = 0;
> + do {
> + start = of_read_number(reg, aw);
> + reg += aw;
> + size = of_read_number(reg, sw);
> + reg += sw;
> + total_mem += size;
> + } while (reg < reg_end);
> +
> + of_node_put(np);
> + edac_printk(KERN_ERR, EDAC_MC, "total_mem 0x%lx\n", total_mem);

Use edac_dbg() here.

Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/