Re: [PATCH] Documentation: dt: mtd: replace "nor-jedec" binding with "jedec,spi-nor"

From: Brian Norris
Date: Mon May 18 2015 - 21:34:28 EST


Hi Geert,

On Mon, May 18, 2015 at 08:51:46PM +0200, Geert Uytterhoeven wrote:
> On Mon, May 18, 2015 at 8:34 PM, Brian Norris
> <computersforpeace@xxxxxxxxx> wrote:
> > On Mon, May 18, 2015 at 11:45:01AM +0100, Mark Rutland wrote:
> >> On Fri, May 15, 2015 at 08:55:41PM +0100, Brian Norris wrote:
> >> > It really helps if I test patches...
> >> >
> >> > On Thu, May 14, 2015 at 10:32:53AM -0700, Brian Norris wrote:
> > [...]
> >> > > @@ -305,7 +305,7 @@ static const struct spi_device_id m25p_ids[] = {
> >> > > * Generic support for SPI NOR that can be identified by the JEDEC READ
> >> > > * ID opcode (0x9F). Use this, if possible.
> >> > > */
> >> > > - {"nor-jedec"},
> >> > > + {"jedec,spi-nor"},
> >> >
> >> > So I forgot (again; we hit this before) that the SPI/OF framework strips
> >> > everything before the first comma before binding devices. See
> >> > of_modalias_node(). So I'll have to squash in the patch below to get a
> >> > usable binding.
> >>
> >> Is it not possible to use the of_match_table on spi_driver::driver? If
> >> not, we really should make it so.
> >
> > Hmm, it does look like spi.c supports multiple matching mechanisms, so I
> > guess m25p80.c could match some with of_match_table and some with
> > modalias/spi_driver.id_table. See:
> >
> > static int spi_match_device(struct device *dev, struct device_driver *drv)
> > {
> > const struct spi_device *spi = to_spi_device(dev);
> > const struct spi_driver *sdrv = to_spi_driver(drv);
> >
> > /* Attempt an OF style match */
> > if (of_driver_match_device(dev, drv))
> > return 1;
> > // ^^^^ we aren't yet (but could be) using this
> >
> > /* Then try ACPI */
> > if (acpi_driver_match_device(dev, drv))
> > return 1;
> >
> > if (sdrv->id_table)
> > return !!spi_match_id(sdrv->id_table, spi);
> > // ^^^^ we're currently only using this
> >
> > return strcmp(spi->modalias, drv->name) == 0;
> > }
> >
> > I'll see about patching this for 4.2. We have a working solution for
> > 4.1 at least.
>
> When using DT:
> - spi_driver.id_table is used to match with vendor-stripped DT "compatible"
> entries.
> - spi_driver.driver.of_match_table is used to match with full DT "compatible"
> entries.
>
> Note that stripping of vendor names from DT "compatible" entries is done
> for the _first_ "compatible" entry in the device node only!
> Hence
>
> compatible = "myvendor,m25p80";
>
> will match against "m25p80" in m25p_ids[], while
>
> compatible = "myvendor,shinynewdevice", "st,m25p80";
>
> will _not_ match against "m25p80" in m25p_ids[], and fail to probe in
> the absence of a driver entry for the first (real) "compatible" entry.

This last part is a little odd, but understandable I guess.

> I2c behaves similarly.

So how about the following patch? It seems like we'll need to be able to
ignore useless 'modalias' values in cases like this:

// modalias = "shinynewdevice"
compatible = "myvendor,shinynewdevice", "jedec,spi-nor";

and also if somebody leaves off the entire shinynewdevice string:

// modalias = "spi-nor"
compatible = "jedec,spi-nor";

So we rework the spi-nor library to not reject "bad" names, and just
fall back to autodetection, and we add the .of_match_table to properly
catch all "jedec,spi-nor".

Signed-off-by: Brian Norris <computerfsorpeace@xxxxxxxxx>
---
drivers/mtd/devices/m25p80.c | 18 +++++++++++-------
drivers/mtd/spi-nor/spi-nor.c | 8 ++++----
2 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 3af137f49ac9..30d608775f5a 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -223,8 +223,6 @@ static int m25p_probe(struct spi_device *spi)
*/
if (data && data->type)
flash_name = data->type;
- else if (!strcmp(spi->modalias, "spi-nor"))
- flash_name = NULL; /* auto-detect */
else
flash_name = spi->modalias;

@@ -301,19 +299,25 @@ static const struct spi_device_id m25p_ids[] = {
{"w25q128"}, {"w25q256"}, {"cat25c11"},
{"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"},

- /*
- * Generic support for SPI NOR that can be identified by the JEDEC READ
- * ID opcode (0x9F). Use this, if possible.
- */
- {"spi-nor"},
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);

+static const struct of_device_id m25p_of_table[] = {
+ /*
+ * Generic compatibility for SPI NOR that can be identified by the
+ * JEDEC READ ID opcode (0x9F). Use this, if possible.
+ */
+ { .compatible = "jedec,spi-nor" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, m25p_of_table);
+
static struct spi_driver m25p80_driver = {
.driver = {
.name = "m25p80",
.owner = THIS_MODULE,
+ .of_match_table = m25p_of_table,
},
.id_table = m25p_ids,
.probe = m25p_probe,
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 14a5d2325dac..390d6fa0a53f 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1003,11 +1003,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (ret)
return ret;

- /* Try to auto-detect if chip name wasn't specified */
- if (!name)
- id = spi_nor_read_id(nor);
- else
+ if (name)
id = spi_nor_match_id(name);
+ /* Try to auto-detect if chip name wasn't specified or not found */
+ if (!id)
+ id = spi_nor_read_id(nor);
if (IS_ERR_OR_NULL(id))
return -ENOENT;

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/