Re: [PATCH v4 3/7] mmc: mediatek: Add PM support for MMC driver

From: Ulf Hansson
Date: Tue May 19 2015 - 06:41:25 EST


On 19 May 2015 at 08:36, Chaotian Jing <chaotian.jing@xxxxxxxxxxxx> wrote:
> Add PM support for Mediatek MMC driver
> Save/restore registers when PM
>
> Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
> ---
> drivers/mmc/host/mtk-sd.c | 99 +++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 95 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 26e9590..c0b2e2d 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -22,6 +22,7 @@
> #include <linux/of_gpio.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> #include <linux/regulator/consumer.h>
> #include <linux/spinlock.h>
>
> @@ -212,6 +213,7 @@
> #define MSDC_ASYNC_FLAG (0x1 << 1)
> #define MSDC_MMAP_FLAG (0x1 << 2)
>
> +#define MTK_MMC_AUTOSUSPEND_DELAY 50
> #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */
> #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */
>
> @@ -254,6 +256,15 @@ struct msdc_dma {
> dma_addr_t bd_addr; /* the physical address of bd array */
> };
>
> +struct msdc_save_para {
> + u32 msdc_cfg;
> + u32 iocon;
> + u32 sdc_cfg;
> + u32 pad_tune;
> + u32 patch_bit0;
> + u32 patch_bit1;
> +};
> +
> struct msdc_host {
> struct device *dev;
> struct mmc_host *mmc; /* mmc structure */
> @@ -287,6 +298,8 @@ struct msdc_host {
> bool vqmmc_enabled;
> bool sclk_enabled; /* source clock enabled */
> bool hclk_enabled; /* Hclk enabled */
> + bool in_suspend; /* used for apply restore regs */

You shouldn't need to track this.

> + struct msdc_save_para save_para; /* used when gate HCLK */
> };
>
> static void sdr_set_bits(void __iomem *reg, u32 bs)
> @@ -459,6 +472,30 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
> sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
> }
>
> +static void msdc_save_reg(struct msdc_host *host)
> +{
> + host->save_para.msdc_cfg = readl(host->base + MSDC_CFG);
> + host->save_para.iocon = readl(host->base + MSDC_IOCON);
> + host->save_para.sdc_cfg = readl(host->base + SDC_CFG);
> + host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
> + host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
> + host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
> + host->in_suspend = true;
> +}
> +
> +static void msdc_restore_reg(struct msdc_host *host)
> +{
> + if (host->in_suspend == false)
> + return;
> + writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
> + writel(host->save_para.iocon, host->base + MSDC_IOCON);
> + writel(host->save_para.sdc_cfg, host->base + SDC_CFG);
> + writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE);
> + writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
> + writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
> + host->in_suspend = false;
> +}
> +
> static void msdc_disable_src_clk(struct msdc_host *host)
> {
> if (host->sclk_enabled) {
> @@ -479,6 +516,10 @@ static void msdc_enable_src_clk(struct msdc_host *host)
>
> static void msdc_gate_clock(struct msdc_host *host)
> {
> + /* Save register first, only when clk is on */
> + if (host->sclk_enabled)
> + msdc_save_reg(host);

Please move msdc_save_reg() outside the msdc_gate_clock() function,
since I think these things should be somewhat decoupled for each
other.

> +
> msdc_disable_src_clk(host);
> if (!IS_ERR(host->h_clk) && host->hclk_enabled) {
> clk_disable_unprepare(host->h_clk);
> @@ -493,6 +534,8 @@ static void msdc_ungate_clock(struct msdc_host *host)
> host->hclk_enabled = true;
> }
> msdc_enable_src_clk(host);
> + /* Then restore register */
> + msdc_restore_reg(host);

As above, please do msdc_restore_reg() outside of msdc_ungate_clock().

> }
>
> static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz)
> @@ -710,6 +753,9 @@ static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
> if (mrq->data)
> msdc_unprepare_data(host, mrq);
> mmc_request_done(host->mmc, mrq);
> +
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> }
>
> /* returns true if command is fully handled; returns false otherwise */
> @@ -866,6 +912,8 @@ static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
> WARN_ON(host->mrq);
> spin_unlock_irqrestore(&host->lock, flags);
>
> + pm_runtime_get_sync(host->dev);
> +
> if (mrq->data)
> msdc_prepare_data(host, mrq);
>
> @@ -1130,7 +1178,8 @@ static void msdc_init_hw(struct msdc_host *host)
> sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
> writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
> /* Configure to enable SDIO mode.
> - it's must otherwise sdio cmd5 failed */
> + * it's must otherwise sdio cmd5 failed
> + */

White space.

> sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
>
> /* disable detect SDIO device interrupt function */
> @@ -1185,6 +1234,8 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> int ret;
> u32 ddr = 0;
>
> + pm_runtime_get_sync(host->dev);
> +
> if (ios->timing == MMC_TIMING_UHS_DDR50 ||
> ios->timing == MMC_TIMING_MMC_DDR52)
> ddr = 1;
> @@ -1200,7 +1251,7 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> ios->vdd);
> if (ret) {
> dev_err(host->dev, "Failed to set vmmc power!\n");
> - return;
> + goto end;
> }
> }
> break;
> @@ -1234,6 +1285,10 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>
> if (host->mclk != ios->clock || host->ddr != ddr)
> msdc_set_mclk(host, ddr, ios->clock);
> +
> +end:
> + pm_runtime_mark_last_busy(host->dev);
> + pm_runtime_put_autosuspend(host->dev);
> }
>
> static struct mmc_host_ops mt_msdc_ops = {
> @@ -1355,12 +1410,18 @@ static int msdc_drv_probe(struct platform_device *pdev)
> if (ret)
> goto release;
>
> + pm_runtime_set_active(host->dev);
> + pm_runtime_set_autosuspend_delay(host->dev, MTK_MMC_AUTOSUSPEND_DELAY);
> + pm_runtime_use_autosuspend(host->dev);
> + pm_runtime_enable(host->dev);
> ret = mmc_add_host(mmc);
> +
> if (ret)
> - goto release;
> + goto end;
>
> return 0;
> -
> +end:
> + pm_runtime_disable(host->dev);
> release:
> platform_set_drvdata(pdev, NULL);
> msdc_deinit_hw(host);
> @@ -1388,10 +1449,15 @@ static int msdc_drv_remove(struct platform_device *pdev)
> mmc = platform_get_drvdata(pdev);
> host = mmc_priv(mmc);
>
> + pm_runtime_get_sync(host->dev);
> +
> platform_set_drvdata(pdev, NULL);
> mmc_remove_host(host->mmc);
> msdc_deinit_hw(host);
> + msdc_gate_clock(host);

As per comment on patch 2. This clock gating should be a part of that
patch instead.

>
> + pm_runtime_disable(host->dev);
> + pm_runtime_put_noidle(host->dev);
> dma_free_coherent(&pdev->dev,
> sizeof(struct mt_gpdma_desc),
> host->dma.gpd, host->dma.gpd_addr);
> @@ -1403,6 +1469,30 @@ static int msdc_drv_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int msdc_runtime_suspend(struct device *dev)
> +{
> + struct mmc_host *mmc = dev_get_drvdata(dev);
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + msdc_gate_clock(host);
> + return 0;
> +}
> +
> +static int msdc_runtime_resume(struct device *dev)
> +{
> + struct mmc_host *mmc = dev_get_drvdata(dev);
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + msdc_ungate_clock(host);
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops msdc_dev_pm_ops = {
> + SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
> +};
> +
> static const struct of_device_id msdc_of_ids[] = {
> { .compatible = "mediatek,mt8135-mmc", },
> {}
> @@ -1414,6 +1504,7 @@ static struct platform_driver mt_msdc_driver = {
> .driver = {
> .name = "mtk-msdc",
> .of_match_table = msdc_of_ids,
> + .pm = &msdc_dev_pm_ops,
> },
> };
>
> --
> 1.8.1.1.dirty
>

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/