Re: [PATCH v4 2/3] irqchip: GIC: Add support for irq_{get,set}_irqchip_state

From: Feng Kan
Date: Tue May 19 2015 - 17:45:38 EST


On Tue, May 19, 2015 at 3:01 AM, Marc Zyngier <marc.zyngier@xxxxxxx> wrote:
> On Tue, 19 May 2015 09:40:21 +0100
> Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>
>> On Thu, May 14, 2015 at 10:14 PM, Feng Kan <fkan@xxxxxxx> wrote:
>> > On Thu, May 14, 2015 at 3:32 AM, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>>
>> >> But surely the GPIO block has its own status register, so are
>> >> you saying that this register is unreliable?
>> >
>> > When the GPIO is used as interrupt, the gpio block does not report the
>> > status anymore. Which leaves us stuck with SPISR.
>> >>
>> >> I can think of a few reasons, like transient IRQs etc but
>> >> what is actually causing this?
>> >
>> > I won't say the obvious.
>>
>> Yeah I see your problem now :(
>>
>> I think it's better to fix the access functions so that you can
>> cross-call to the GIC driver to get the SPISR flag out though.
>> Let's see what Marc says.
>>
>> >> Which GPIO driver is this? Is it upstream?
>> >
>> > Yes, it is upstream. It is the xgene slimpro gpio driver. I am starting to
>> > think that we ought to switch to use some gpio poll driver rather than
>> > using gpio-key.
>>
>> There is both gpio_keys_polled and IRQ-driven gpio_keys so yeah
>> that's possible. But honestly I think it's better to deal with this
>> problem for real because IRQ is more efficient.
>>
>> So the way I perceive it this is the real problem:
>>
>> +static int gic_irq_get_irqchip_state(struct irq_data *d,
>> + enum irqchip_irq_state which, bool *val)
>> +{
>> + switch (which) {
>> (...)
>> + case IRQCHIP_STATE_ACTIVE:
>> + *val = gic_peek_irq(d, GIC_DIST_ACTIVE_SET);
>> + break; case: read
>> from 0xd04 (SPISR) instead, because that makes more
>> sense to me, or am I wrong at it?
>>
>> + case IRQCHIP_STATE_LINE_LEVEL:
>> + *val = gic_peek_irq(d, GIC_DIST_SPISR);
>> + break;
>>
>> And then put a define into <linux/irqchip/arm-gic.h> for
>> GIC_DIST_SPISR.
>
> What worries me here is that the PENDING state should already give you
> the right level of information (this is what the GIC-400 TRM says). The
> only reason why SPISR exists is that software can write to the PENDING
> register, while SPISR is RO.
>
> If reading the pending state doesn't work, then I'd like to know
> exactly *why*. Only then we can add support for LINE_LEVEL using SPISR
> (which has to be GIC-400 specific, as it is not architected).

IS_PENDING and IS_ACTIVE works fine for the ISR context. However,
the nature of the register is meant for IRQ handling and not to read
the status of a GPIO. By the time the gpio_key throws a work queue
and check the status of the PENDING register, it is no long relevant.



>
> Thanks,
>
> M.
> --
> Jazz is not dead. It just smells funny.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/