Re: [PATCH v5 00/10] tracing: 'hist' triggers
From: Masami Hiramatsu
Date: Thu May 21 2015 - 04:09:05 EST
Hi Tom,
On 2015/05/21 6:19, Tom Zanussi wrote:
> This is v5 of the 'hist triggers' patchset, following feedback from
> v4.
>
> Changes from v4:
>
> This version addresses some problems and suggestions made by Daniel
> Wagner - a lot of the code was reworked to get rid of the distinction
> between keys and values, and as a result, both keys and values can be
> used as sort keys. As suggested, it also allows 'val=' to be absent
> in a trigger command - if no 'val' is specified, hitcount is assumed
> and automatically used as the only val.
Thank you for this amazing work! :)
Here is an example how I've used it.
---------
[root@localhost perf]# ./perf probe -a '__kmalloc caller=$stack0 size'
Added new event:
probe:__kmalloc (on __kmalloc with caller=$stack0 size)
You can now use it in all perf tools, such as:
perf record -e probe:__kmalloc -aR sleep 1
[root@localhost perf]# cd /sys/kernel/debug/tracing
[root@localhost tracing]# echo hist:keys=caller.sym > events/probe/__kmalloc/trigger
[root@localhost tracing]# echo 1 > events/probe/__kmalloc/enable
[root@localhost tracing]# cat events/probe/__kmalloc/hist
# trigger info: hist:keys=caller.sym:vals=hitcount:sort=hitcount:size=2048 [active]
caller: [ffffffff811964d7] tracing_map_sort_entries hitcount: 1
caller: [ffffffff81296120] load_elf_binary hitcount: 1
caller: [ffffffff813eb98c] context_struct_to_string hitcount: 1
caller: [ffffffff81264c8c] simple_xattr_alloc hitcount: 1
caller: [ffffffff811e0a02] shmem_initxattrs hitcount: 1
caller: [ffffffff81295eb6] load_elf_phdrs hitcount: 2
caller: [ffffffff8169c49b] sk_prot_alloc hitcount: 2
caller: [ffffffff81395567] kmem_alloc hitcount: 6
caller: [ffffffff8125b844] alloc_fdmem hitcount: 6
caller: [ffffffff81415918] bio_alloc_bioset hitcount: 8
caller: [ffffffff813ecc44] security_context_to_sid_core hitcount: 17
caller: [ffffffff812621bb] seq_buf_alloc hitcount: 18
Totals:
Hits: 64
Entries: 12
Dropped: 0
----------
Good! Just one more, I also want to see the offset of the symbols. :)
And this can dig deeper to investigate the size histogram, with filtering by caller.
----------
[root@localhost tracing]# echo \!hist:keys=caller.sym > events/probe/__kmalloc/trigger
[root@localhost tracing]# echo hist:keys=size if caller==0xffffffff812621bb > events/probe/__kmalloc/trigger
[root@localhost tracing]# cat events/probe/__kmalloc/hist
# trigger info: hist:keys=size:vals=hitcount:sort=hitcount:size=2048 if caller==0xffffffff812621bb [active]
size: 3024 hitcount: 1
size: 4096 hitcount: 12
Totals:
Hits: 13
Entries: 2
Dropped: 0
[root@localhost tracing]#
---------
Yes! This interactivity is what I want :)
Another enhancement ideas what I want are here:
- Named hist instance, which can be shared among several events.
Since probing an inlined function can make a several probe-events,
those need to share a histogram among them.
- Multiple hist instances for each event, which allows us to compare
several histograms which have different filters.
Anyway, without above, this look fine to me :)
>
> The map code was also separated out into a separate file,
> tracing_map.c, allowing it to be reused. It also adds a second tracer
> called function_hist that actually does reuse the code, as an RFC
> patch.
>
> Patch 01/10 [tracing: Update cond flag when enabling or disabling..]
> is a fix for a problem noticed by Daniel and that fixes a problem in
> existing trigger code and should be applied regardless of whether the
> rest of the patchset is merged.
I've reviewed that.
> As mentioned, patch 10/10 is an RFC patch implementing a new tracer
> based on the function tracer code. It's a fun little tool and is
> useful for a specific problem I'm working on (and is also a nice test
> of the tracing_map code), but is an RFC because first, I'm not sure it
> would really be of general interest and secondly, it's POC-level
> quality and I'd need to spend more time fixing it up to make it
> upstreamable, but I don't want to waste my time if not.
BTW, I've hit a warning while testing:
[ 8431.319668] ------------[ cut here ]------------
[ 8431.319678] WARNING: CPU: 0 PID: 14413 at /home/mhiramat/ksrc/linux-3/kernel/trace/ftrace.c:5080 ftrace_init_array_ops+0x6e/0x90()
[ 8431.319680] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT
nf_reject_ipv4 iptable_filter ip_tables tun bridge stp llc coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel glue_helper lrw gf128mul ablk_helper cryptd iTCO_wdt
iTCO_vendor_support ipmi_si lpc_ich ipmi_msghandler mfd_core pcspkr i2c_i801 i2c_ismt shpchp acpi_cpufreq uinput sr_mod sd_mod cdrom ast syscopyarea sysfillrect sysimgblt drm_kms_helper ttm drm ahci
igb libahci libata ptp pps_core dca i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod
[ 8431.319736] CPU: 0 PID: 14413 Comm: ftracetest Not tainted 4.1.0-rc3+ #33
[ 8431.319738] Hardware name: Supermicro A1SAi/A1SAi, BIOS 1.0b 11/06/2013
[ 8431.319741] 0000000000000000 0000000037d828fa ffff880467eabc98 ffffffff817d5b48
[ 8431.319745] 0000000000000000 0000000000000000 ffff880467eabcd8 ffffffff810c70ba
[ 8431.319748] ffff880467eabcb8 ffffffff820a2b80 ffffffff81197330 ffffffff820a2b80
[ 8431.319752] Call Trace:
[ 8431.319760] [<ffffffff817d5b48>] dump_stack+0x45/0x57
[ 8431.319765] [<ffffffff810c70ba>] warn_slowpath_common+0x8a/0xc0
[ 8431.319769] [<ffffffff81197330>] ? function_hist_open+0x20/0x20
[ 8431.319772] [<ffffffff810c71ea>] warn_slowpath_null+0x1a/0x20
[ 8431.319776] [<ffffffff81183efe>] ftrace_init_array_ops+0x6e/0x90
[ 8431.319779] [<ffffffff811976d8>] function_hist_init+0x28/0x160
[ 8431.319783] [<ffffffff811918ee>] tracing_set_tracer+0x10e/0x1b0
[ 8431.319787] [<ffffffff8137cd8f>] ? xfs_file_buffered_aio_write+0xaf/0x240
[ 8431.319791] [<ffffffff81191bc0>] tracing_set_trace_write+0x90/0xd0
[ 8431.319796] [<ffffffff8123d2d7>] __vfs_write+0x37/0x110
[ 8431.319799] [<ffffffff81240198>] ? __sb_start_write+0x58/0x100
[ 8431.319804] [<ffffffff813d5393>] ? security_file_permission+0x23/0xa0
[ 8431.319808] [<ffffffff8123da09>] vfs_write+0xa9/0x1b0
[ 8431.319812] [<ffffffff810716fc>] ? do_audit_syscall_entry+0x6c/0x70
[ 8431.319816] [<ffffffff8123e8b5>] SyS_write+0x55/0xd0
[ 8431.319821] [<ffffffff817dd26e>] system_call_fastpath+0x12/0x71
[ 8431.319823] ---[ end trace 7f402f6ea6c9516c ]---
[ 8431.319826] ftrace ops had function_hist_call+0x0/0x150 for function
Here is the ftrace.c:5080
-----
void ftrace_init_array_ops(struct trace_array *tr, ftrace_func_t func)
{
/* If we filter on pids, update to use the pid function */
if (tr->flags & TRACE_ARRAY_FL_GLOBAL) {
if (WARN_ON(tr->ops->func != ftrace_stub)) <-- here
printk("ftrace ops had %pS for function\n",
tr->ops->func);
/* Only the top level instance does pid tracing */
if (!list_empty(&ftrace_pids)) {
set_ftrace_pid_function(func);
func = ftrace_pid_func;
}
}
tr->ops->func = func;
tr->ops->private = tr;
}
-----
Since function_hist_call was introduced by 10/10, this warning was also
occurred by it.
Thank you,
--
Masami HIRAMATSU
Linux Technology Research Center, System Productivity Research Dept.
Center for Technology Innovation - Systems Engineering
Hitachi, Ltd., Research & Development Group
E-mail: masami.hiramatsu.pt@xxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/