[PATCH v2] gpio: rcar: Check for irq_set_irq_wake() failures

From: Geert Uytterhoeven
Date: Thu May 21 2015 - 07:21:50 EST


If an interrupt controller doesn't support wake-up configuration,
irq_set_irq_wake() returns an error code. Then any subsequent call
trying to deconfigure wake-up will cause an imbalance, and a warning
will be printed:

WARNING: CPU: 1 PID: 1341 at kernel/irq/manage.c:540 irq_set_irq_wake+0x9c/0xf8()
Unbalanced IRQ 26 wake disable

To fix this, refrain from any further parent interrupt controller
(de)configuration if irq_set_irq_wake() failed.

Alternative fixes would be:
- calling "gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE)" from the
platform code,
- setting "gic_chip.flags = IRQCHIP_SKIP_SET_WAKE" in the GIC driver
code,
but these were withheld as the GIC hardware doesn't really support
wake-up interrupts.

Fixes: ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable when wake-up is enabled")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- Reworded patch description,
- Moved alternatives into the patch description.
---
drivers/gpio/gpio-rcar.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index fd39774659484fa6..1e14a6c74ed13941 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -177,8 +177,17 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv,
gpio_chip);
-
- irq_set_irq_wake(p->irq_parent, on);
+ int error;
+
+ if (p->irq_parent) {
+ error = irq_set_irq_wake(p->irq_parent, on);
+ if (error) {
+ dev_dbg(&p->pdev->dev,
+ "irq %u doesn't support irq_set_wake\n",
+ p->irq_parent);
+ p->irq_parent = 0;
+ }
+ }

if (!p->clk)
return 0;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/