Re: [PATCH v1 01/20] [SCSI] mpt3sas: Added Combined Reply Queue feature to extend up-to 96 MSIX vector support

From: Johannes Thumshirn
Date: Fri Jun 19 2015 - 07:04:29 EST


On Fri, Jun 19, 2015 at 04:25:46PM +0530, Sreekanth Reddy wrote:
> In this patch, increased the number of MSIX vector support for SAS3 C0 HBAs to up-to 96.
>
> Following are changes that are done in this patch
> 1. Support this feature only for SAS3 C0 cards and also only when reply post free queue count is greater than 8.
> 2. Instead of using single ReplyPostHostIndex system interface, here 12 ReplyPostHostIndex system interfaces are used. reply post free queues numbered from 0 to 7 use the first ReplyPostHostIndex system interface to update its corresponding ReplyPostHostIndex values, reply post free queues numbered from 8 to 15 will use the second ReplyPostHostIndex system interface and so on. These 12 ReplyPostHostIndex system interfaces address are saved in the array replyPostRegisterIndex[].
> 3. Update the ReplyPostHostIndex value of corresponding reply post free queue in the (its msix_index/8)th entry of replyPostRegisterIndex[] array after processing the reply post descriptor.
>
> Changes in v1:
> Updated the description of module parameter max_msix_vectors
>
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.c | 72 ++++++++++++++++++++++++++++++++-----
> drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +++-
> 2 files changed, 70 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index 14a781b..7d0ec5c 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
> @@ -83,10 +83,10 @@ static int msix_disable = -1;
> module_param(msix_disable, int, 0);
> MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
>
> -static int max_msix_vectors = 8;
> +static int max_msix_vectors = -1;
> module_param(max_msix_vectors, int, 0);
> MODULE_PARM_DESC(max_msix_vectors,
> - " max msix vectors - (default=8)");
> + " max msix vectors");
>
> static int mpt3sas_fwfault_debug;
> MODULE_PARM_DESC(mpt3sas_fwfault_debug,
> @@ -1009,8 +1009,15 @@ _base_interrupt(int irq, void *bus_id)
> }
>
> wmb();
> - writel(reply_q->reply_post_host_index | (msix_index <<
> - MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
> + if (ioc->msix96_vector) {
> + writel(reply_q->reply_post_host_index | ((msix_index & 7) <<
> + MPI2_RPHI_MSIX_INDEX_SHIFT),
> + ioc->replyPostRegisterIndex[msix_index/8]);
> + } else {
> + writel(reply_q->reply_post_host_index | (msix_index <<
> + MPI2_RPHI_MSIX_INDEX_SHIFT),
> + &ioc->chip->ReplyPostHostIndex);
> + }
> atomic_dec(&reply_q->busy);
> return IRQ_HANDLED;
> }
> @@ -1560,8 +1567,6 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
>
> pci_read_config_word(ioc->pdev, base + 2, &message_control);
> ioc->msix_vector_count = (message_control & 0x3FF) + 1;
> - if (ioc->msix_vector_count > 8)
> - ioc->msix_vector_count = 8;
> dinitprintk(ioc, pr_info(MPT3SAS_FMT
> "msix is supported, vector_count(%d)\n",
> ioc->name, ioc->msix_vector_count));
> @@ -1880,6 +1885,31 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
> if (r)
> goto out_fail;
>
> + /* Use the Combined reply queue feature only for SAS3 C0 HBAs and
> + * also only when reply queue count is greater than 8
> + */
> + if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
> + /* If this is an 96 vector supported device,
> + set up ReplyPostIndex addresses */
> + ioc->replyPostRegisterIndex = kcalloc(12,
> + sizeof(resource_size_t *), GFP_KERNEL);
> + if (!ioc->replyPostRegisterIndex) {
> + dfailprintk(ioc, printk(MPT3SAS_FMT
> + "allocation for reply Post Register Index failed!!!\n",
> + ioc->name));
> + r = -ENOMEM;
> + goto out_fail;
> + }
> +
> + for (i = 0; i < 12; i++) {
> + ioc->replyPostRegisterIndex[i] = (resource_size_t *)
> + ((u8 *)&ioc->chip->Doorbell +
> + MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
> + (i * 0x10));
> + }
> + } else
> + ioc->msix96_vector = 0;
> +
> list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
> pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
> reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
> @@ -1901,6 +1931,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
> pci_release_selected_regions(ioc->pdev, ioc->bars);
> pci_disable_pcie_error_reporting(pdev);
> pci_disable_device(pdev);
> + if (ioc->msix96_vector)
> + kfree(ioc->replyPostRegisterIndex);
> return r;
> }
>
> @@ -4522,8 +4554,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
>
> /* initialize reply post host index */
> list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
> - writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
> - &ioc->chip->ReplyPostHostIndex);
> + if (ioc->msix96_vector) {
> + writel((reply_q->msix_index & 7)<<
> + MPI2_RPHI_MSIX_INDEX_SHIFT,
> + ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
> + } else {
> + writel(reply_q->msix_index <<
> + MPI2_RPHI_MSIX_INDEX_SHIFT,
> + &ioc->chip->ReplyPostHostIndex);
> + }
> +
> if (!_base_is_controller_msix_enabled(ioc))
> goto skip_init_reply_post_host_index;
> }
> @@ -4577,6 +4617,9 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
> _base_free_irq(ioc);
> _base_disable_msix(ioc);
>
> + if (ioc->msix96_vector)
> + kfree(ioc->replyPostRegisterIndex);
> +
> if (ioc->chip_phys && ioc->chip)
> iounmap(ioc->chip);
> ioc->chip_phys = 0;
> @@ -4600,6 +4643,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
> {
> int r, i;
> int cpu_id, last_cpu_id = 0;
> + u8 revision;
>
> dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> __func__));
> @@ -4618,6 +4662,18 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
> r = -ENOMEM;
> goto out_free_resources;
> }
> + /* Check whether the controller revision is C0 or above.
> + C0 and above revision controllers support 96 vectors */
> + revision = ioc->pdev->revision;
> +
> + if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
> + (revision >= 0x02))
> + ioc->msix96_vector = 1;
>
> ioc->rdpq_array_enable_assigned = 0;
> ioc->dma_mask = 0;
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
> index afa8816..6b8d8f1 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
> @@ -728,7 +728,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
> * is assigned only ones
> * @reply_queue_count: number of reply queue's
> * @reply_queue_list: link list contaning the reply queue info
> - * @reply_post_host_index: head index in the pool where FW completes IO
> + * @msix96_vector: 96 MSI-X vector support
> + * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
> * @delayed_tr_list: target reset link list
> * @delayed_tr_volume_list: volume target reset link list
> * @@temp_sensors_count: flag to carry the number of temperature sensors
> @@ -937,6 +938,10 @@ struct MPT3SAS_ADAPTER {
> u8 reply_queue_count;
> struct list_head reply_queue_list;
>
> + u8 msix96_vector;
> + /* reply post register index */
> + resource_size_t **replyPostRegisterIndex;
> +
> struct list_head delayed_tr_list;
> struct list_head delayed_tr_volume_list;
> u8 temp_sensors_count;
> --
> 2.0.2
>

Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>

--
Johannes Thumshirn Storage
jthumshirn@xxxxxxx +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/