[PATCH] serial: 8250: Do XR17V35X specific wakeup in serial8250_do_startup

[Joerg Roedel]

From: Joerg Roedel <jroedel@xxxxxxx>

While debugging why my 8-port XR17V35X card does not work
with the in-kernel serial driver, I found that some chip
specific wakeup code is necessary to get it working.

Specificly the EFR_ECB bit needs to be set in the
chip-specific UART_XR_EFR register, so that writing to a
couple of other configuration bits is enabled.

Cc: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
Cc: Michael Welling <mwelling@xxxxxxxx>
Cc: Joe Schultz <jschultz@xxxxxxxxxxx>
Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
---
 drivers/tty/serial/8250/8250_core.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 4506e40..de34db3 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2176,6 +2176,18 @@ int serial8250_do_startup(struct uart_port *port)
 	 */
 	enable_rsa(up);
 #endif
+
+	/*
+	 * Do this right before clearing the FIFOs to prevent
+	 * interrupt storm.
+	 */
+	if (port->type == PORT_XR17V35X) {
+		/* Wake up and initialize UART */
+		serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
+		serial_port_out(port, UART_IER, 0);
+		serial_port_out(port, UART_LCR, 0);
+	}
+
 	/*
 	 * Clear the FIFO buffers and disable them.
 	 * (they will be reenabled in set_termios())
-- 
1.8.4.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/