Re: [PATCH v2] power: max17042_battery: add HEALTH and TEMP_* properties support

[Sebastian Reichel]

Hi,

On Mon, Jul 27, 2015 at 09:34:13AM +0900, Krzysztof Kozlowski wrote:
>>> [...]
>>
>> I missed this email (may be overlooked it). To have the
>> interrupts enabled we need the config registers(0x1Dh) bit's
>> BIT(9), BIT(4) and BIT92) should be 1 and  BIT(8) should be 0.
>> 
>> Can you dump the status(00h), Talrt(02H) Temp(08h) and
>> config(1Dh) registers values and share?
> 
> Thanks for responding. The issue was in BIT(8) which was set to default
> value of 0x1. This would mean to use external sensor but the board does
> not have it.
> 
> This is a DT platform and there is no initial config data so all
> registers are set to default values.
> 
> Anyway everything seems to work as expected, thanks for explanation.

So I guess the bit should be set to 0 during probe. Maybe with a
boolean DT property "maxim,has-external-sensor" for setting it
to 1.

-- Sebastian

Attachment: signature.asc
Description: Digital signature