Re: [PATCH V3 0/3] da9062: Add DA9062 OnKey support using the existing DA9063 OnKey driver

[Lee Jones]

> From: S Twiss <stwiss.opensource@xxxxxxxxxxx>

Steve,

Can you sort out your git configuration please.  Your name should be
represented in full.  No abbreviations or synonyms please.

I would expect to see: 'Steve Twiss <stwiss.opensource@xxxxxxxxxxx>'

The mailer is less important, but I suggest 'Steve Twiss' would be
more professional than either 'S Twiss' or 'Opensource [Steve Twiss]'.

I appreciate it might be company policy, but is there any chance of
reversing that to read 'Steve Twiss [Opensource]' instead?

> This patch set adds OnKey support for the Dialog DA9062 Power Management IC.
> Changes are made to the existing DA9063 OnKey component so that functionality
> in this device driver can be re-used to support the DA9062 OnKey.
> 
> This following patch set re-uses the existing kernel OnKey driver for chips
> whose OnKey blocks are functionally similar to the DA9063 OnKey.
> 
> The main points for the MFD core and device tree changes are as follows.
> 
> - Alteration of the DA9063 OnKey Kconfig needs to be updated to depend on
>   both MFD_DA9063 "or" MFD_DA9062. There is no explicit DA9062 OnKey Kconfig.
> - The DA9062 MFD core should add a new OnKey resource as usual and an entry
>   in the mfd_cell to support a component name and of_compatible for
>   "da9062-onkey" and "dlg,da9062-onkey".
> - The device tree binding support should include a compatible string for
>   "dlg,da9062-onkey"
> 
> The main points for the OnKey changes are as follows:
> 
> A generic structure is used (called da906x_chip_config) to hold all generic
> registers and bitmasks for use with this type of OnKey component.
> 
> Functions in the DA9063 OnKey will be refactored to use this compatibility
> struct and all accesses to generic registers/masks will be made through
> this table look-up instead of using defines from the register header files
> directly
> 
> Linkage between the DA9062 MFD and the DA9063 OnKey driver is created through
> the use of an of_match_table entry in the platform_driver structure.
> A re-work of da9063_onkey_probe() is necessary to use the of_match_node() and
> dev_get_regmap() functions: this will provide initialisation of the generic
> registers and masks and allow access to the regmap according to the correct
> device tree specification.
> 
> The addition of a of_device_id table for DA9063 and DA9062 default data
> is created. 
> 
> In this patch set the following is provided:
>  - [PATCH V3 1/3]: MFD changes in DA9062 to support OnKey
>  - [PATCH V3 2/3]: Update existing DA9063 OnKey to add DA9062 support
>  - [PATCH V3 3/3]: Device tree bindings for DA9062 OnKey component
> 
> This patch applies against linux-next and next-20150708 
> 
> Thank you,
> Steve Twiss, Dialog Semiconductor Ltd.
> 
> S Twiss (3):
>   mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
>   onkey: da9063: Add DA9062 OnKey capability to DA9063 OnKey driver
>   devicetree: da9062: Add device tree bindings for DA9062 OnKey
> 
>  .../devicetree/bindings/input/da9062-onkey.txt     |  36 ++++++
>  Documentation/devicetree/bindings/mfd/da9062.txt   |   3 +
>  drivers/input/misc/Kconfig                         |   8 +-
>  drivers/input/misc/da9063_onkey.c                  | 129 +++++++++++++++++----
>  drivers/mfd/da9062-core.c                          |  11 ++
>  5 files changed, 158 insertions(+), 29 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/da9062-onkey.txt
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/