[PATCH 60/74] blackfin/time-ts: Migrate to new 'set-state' interface
From: Daniel Lezcano
Date: Mon Aug 10 2015 - 05:59:51 EST
From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Migrate blackfin driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in ->set_mode(RESUME) and so tick_resume()
isn't implemented.
Cc: Steven Miao <realmz6@xxxxxxxxx>
Cc: adi-buildroot-devel@xxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
arch/blackfin/kernel/time-ts.c | 136 +++++++++++++++++++++--------------------
1 file changed, 70 insertions(+), 66 deletions(-)
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index cb0a484..fb9e95f 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -136,44 +136,44 @@ static int bfin_gptmr0_set_next_event(unsigned long cycles,
return 0;
}
-static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+static int bfin_gptmr0_set_periodic(struct clock_event_device *evt)
{
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC: {
#ifndef CONFIG_BF60x
- set_gptimer_config(TIMER0_id, \
- TIMER_OUT_DIS | TIMER_IRQ_ENA | \
- TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+ set_gptimer_config(TIMER0_id,
+ TIMER_OUT_DIS | TIMER_IRQ_ENA |
+ TIMER_PERIOD_CNT | TIMER_MODE_PWM);
#else
- set_gptimer_config(TIMER0_id, TIMER_OUT_DIS
- | TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER);
+ set_gptimer_config(TIMER0_id,
+ TIMER_OUT_DIS | TIMER_MODE_PWM_CONT |
+ TIMER_PULSE_HI | TIMER_IRQ_PER);
#endif
- set_gptimer_period(TIMER0_id, get_sclk() / HZ);
- set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
- enable_gptimers(TIMER0bit);
- break;
- }
- case CLOCK_EVT_MODE_ONESHOT:
- disable_gptimers(TIMER0bit);
+ set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+ set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+ enable_gptimers(TIMER0bit);
+ return 0;
+}
+
+static int bfin_gptmr0_set_oneshot(struct clock_event_device *evt)
+{
+ disable_gptimers(TIMER0bit);
#ifndef CONFIG_BF60x
- set_gptimer_config(TIMER0_id, \
- TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+ set_gptimer_config(TIMER0_id,
+ TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
#else
- set_gptimer_config(TIMER0_id, TIMER_OUT_DIS | TIMER_MODE_PWM
- | TIMER_PULSE_HI | TIMER_IRQ_WID_DLY);
+ set_gptimer_config(TIMER0_id,
+ TIMER_OUT_DIS | TIMER_MODE_PWM | TIMER_PULSE_HI |
+ TIMER_IRQ_WID_DLY);
#endif
- set_gptimer_period(TIMER0_id, 0);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- disable_gptimers(TIMER0bit);
- break;
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
+ set_gptimer_period(TIMER0_id, 0);
+ return 0;
+}
+
+static int bfin_gptmr0_shutdown(struct clock_event_device *evt)
+{
+ disable_gptimers(TIMER0bit);
+ return 0;
}
static void bfin_gptmr0_ack(void)
@@ -211,13 +211,16 @@ static struct irqaction gptmr0_irq = {
};
static struct clock_event_device clockevent_gptmr0 = {
- .name = "bfin_gptimer0",
- .rating = 300,
- .irq = IRQ_TIMER0,
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = bfin_gptmr0_set_next_event,
- .set_mode = bfin_gptmr0_set_mode,
+ .name = "bfin_gptimer0",
+ .rating = 300,
+ .irq = IRQ_TIMER0,
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = bfin_gptmr0_set_next_event,
+ .set_state_shutdown = bfin_gptmr0_shutdown,
+ .set_state_periodic = bfin_gptmr0_set_periodic,
+ .set_state_oneshot = bfin_gptmr0_set_oneshot,
};
static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
@@ -250,36 +253,35 @@ static int bfin_coretmr_set_next_event(unsigned long cycles,
return 0;
}
-static void bfin_coretmr_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+static int bfin_coretmr_set_periodic(struct clock_event_device *evt)
{
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC: {
- unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
- bfin_write_TCNTL(TMPWR);
- CSYNC();
- bfin_write_TSCALE(TIME_SCALE - 1);
- bfin_write_TPERIOD(tcount);
- bfin_write_TCOUNT(tcount);
- CSYNC();
- bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
- break;
- }
- case CLOCK_EVT_MODE_ONESHOT:
- bfin_write_TCNTL(TMPWR);
- CSYNC();
- bfin_write_TSCALE(TIME_SCALE - 1);
- bfin_write_TPERIOD(0);
- bfin_write_TCOUNT(0);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- bfin_write_TCNTL(0);
- CSYNC();
- break;
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
+ unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+
+ bfin_write_TCNTL(TMPWR);
+ CSYNC();
+ bfin_write_TSCALE(TIME_SCALE - 1);
+ bfin_write_TPERIOD(tcount);
+ bfin_write_TCOUNT(tcount);
+ CSYNC();
+ bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
+ return 0;
+}
+
+static int bfin_coretmr_set_oneshot(struct clock_event_device *evt)
+{
+ bfin_write_TCNTL(TMPWR);
+ CSYNC();
+ bfin_write_TSCALE(TIME_SCALE - 1);
+ bfin_write_TPERIOD(0);
+ bfin_write_TCOUNT(0);
+ return 0;
+}
+
+static int bfin_coretmr_shutdown(struct clock_event_device *evt)
+{
+ bfin_write_TCNTL(0);
+ CSYNC();
+ return 0;
}
void bfin_coretmr_init(void)
@@ -335,7 +337,9 @@ void bfin_coretmr_clockevent_init(void)
evt->shift = 32;
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
evt->set_next_event = bfin_coretmr_set_next_event;
- evt->set_mode = bfin_coretmr_set_mode;
+ evt->set_state_shutdown = bfin_coretmr_shutdown;
+ evt->set_state_periodic = bfin_coretmr_set_periodic;
+ evt->set_state_oneshot = bfin_coretmr_set_oneshot;
clock_tick = get_cclk() / TIME_SCALE;
evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/