Re: [PATCH 19/20] iio: bmc150: Split the driver into core and i2c

From: Jonathan Cameron
Date: Sat Aug 15 2015 - 09:41:56 EST

Next message: Simon Glass: "Re: [PATCH] arm: rpi: Device tree modifications for U-Boot"
Previous message: Christoph Hellwig: "Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory""
In reply to: Markus Pargmann: "[PATCH 19/20] iio: bmc150: Split the driver into core and i2c"
Next in thread: Markus Pargmann: "[PATCH 04/20] regmap: Do not skip format initialization"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 12/08/15 11:12, Markus Pargmann wrote:
> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
There are a few bits in here following through from earlier
patches that I haven't bothered mentioning as you'll have fixed
them already before this split patch).

Two more bits inline. Nothing major though.

Jonathan
> ---
> drivers/iio/accel/Kconfig | 22 +++--
> drivers/iio/accel/Makefile | 3 +-
> .../accel/{bmc150-accel.c => bmc150-accel-core.c} | 95 ++++---------------
> drivers/iio/accel/bmc150-accel-i2c.c | 101 +++++++++++++++++++++
> drivers/iio/accel/bmc150-accel.h | 21 +++++
> 5 files changed, 156 insertions(+), 86 deletions(-)
> rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (95%)
> create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
> create mode 100644 drivers/iio/accel/bmc150-accel.h
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 01dd03d194d1..c63e981c38ff 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -18,22 +18,30 @@ config BMA180
> module will be called bma180.
>
> config BMC150_ACCEL
> - tristate "Bosch BMC150 Accelerometer Driver"
> - depends on I2C
> - select IIO_BUFFER
> - select IIO_TRIGGERED_BUFFER
> + bool "Bosch BMC150 Accelerometer Driver"
> select REGMAP
> - select REGMAP_I2C
> help
> Say yes here to build support for the following Bosch accelerometers:
> BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
>
> - Currently this only supports the device via an i2c interface.
> -
> This is a combo module with both accelerometer and magnetometer.
> This driver is only implementing accelerometer part, which has
> its own address and register map.
This approach does lead to a proliferation of complexity (to the
person configuring the kernel build). I prefer the approach the
ST accel driver for example takes, in which the SPI or I2C drivers
are built depending on whether the relevant dependencies are present
and the core driver is selected.
>
> +if BMC150_ACCEL
> +
> +config BMC150_ACCEL_I2C
> + tristate "I2C support"
> + depends on I2C
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + select REGMAP_I2C
> + help
> + Say yes here to build support for I2C communication with the
> + mentioned accelerometer.
> +
> +endif
> +
> config HID_SENSOR_ACCEL_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index ebd2675b2a02..5ef8bdbad092 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -4,7 +4,8 @@
>
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_BMA180) += bma180.o
> -obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o
> +obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> +obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
> obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
> obj-$(CONFIG_KXSD9) += kxsd9.o
> diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel-core.c
> similarity index 95%
> rename from drivers/iio/accel/bmc150-accel.c
> rename to drivers/iio/accel/bmc150-accel-core.c
> index d75e1b0aa7e9..8cf2786dd433 100644
> --- a/drivers/iio/accel/bmc150-accel.c
> +++ b/drivers/iio/accel/bmc150-accel-core.c
> @@ -37,6 +37,8 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/regmap.h>
>
> +#include "bmc150-accel.h"
> +
> #define BMC150_ACCEL_DRV_NAME "bmc150_accel"
> #define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event"
> #define BMC150_ACCEL_GPIO_NAME "bmc150_accel_int"
> @@ -187,7 +189,6 @@ enum bmc150_accel_trigger_id {
> struct bmc150_accel_data {
> struct regmap *regmap;
> struct device *dev;
At least from how diff is listing it, looks like you've just
moved this down the struct? Why?
> - int irq;
> struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
> atomic_t active_intr;
> struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
> @@ -201,6 +202,7 @@ struct bmc150_accel_data {
> int ev_enable_state;
> int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
> const struct bmc150_accel_chip_info *chip_info;
> + int irq;
> };
>
> static const struct {
> @@ -1076,15 +1078,6 @@ static const struct iio_chan_spec bmc150_accel_channels[] =
> static const struct iio_chan_spec bma280_accel_channels[] =
> BMC150_ACCEL_CHANNELS(14);
>
> -enum {
> - bmc150,
> - bmi055,
> - bma255,
> - bma250e,
> - bma222e,
> - bma280,
> -};
> -
> static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
> [bmc150] = {
> .chip_id = 0xFA,
> @@ -1573,36 +1566,22 @@ static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = {
> .postdisable = bmc150_accel_buffer_postdisable,
> };
>
> -static int bmc150_accel_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> + const char *name, int chip_id, bool block_supported)
> {
> struct bmc150_accel_data *data;
> struct iio_dev *indio_dev;
> int ret;
> - const char *name = NULL;
> - int chip_id = 0;
> - struct device *dev;
>
> - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> if (!indio_dev)
> return -ENOMEM;
>
> data = iio_priv(indio_dev);
> - i2c_set_clientdata(client, indio_dev);
> - data->dev = &client->dev;
> - dev = &client->dev;
> - data->irq = client->irq;
> -
> - data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
> - if (IS_ERR(data->regmap)) {
> - dev_err(dev, "Failed to initialize i2c regmap\n");
> - return PTR_ERR(data->regmap);
> - }
> -
> - if (id) {
> - name = id->name;
> - chip_id = id->driver_data;
> - }
> + dev_set_drvdata(dev, indio_dev);
> + data->dev = dev;
> + data->irq = irq;
> + data->regmap = regmap;
>
> if (ACPI_HANDLE(dev))
> name = bmc150_accel_match_acpi_device(dev, &chip_id);
> @@ -1664,9 +1643,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
> if (ret)
> goto err_buffer_cleanup;
>
> - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
> - i2c_check_functionality(client->adapter,
> - I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
> + if (block_supported) {
> indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
> indio_dev->info = &bmc150_accel_info_fifo;
> indio_dev->buffer->attrs = bmc150_accel_fifo_attributes;
> @@ -1675,7 +1652,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
>
> ret = iio_device_register(indio_dev);
> if (ret < 0) {
> - dev_err(data->dev, "Unable to register iio device\n");
> + dev_err(dev, "Unable to register iio device\n");
> goto err_trigger_unregister;
> }
>
> @@ -1698,10 +1675,11 @@ err_buffer_cleanup:
>
> return ret;
> }
> +EXPORT_SYMBOL_GPL(bmc150_accel_core_probe);
>
> -static int bmc150_accel_remove(struct i2c_client *client)
> +int bmc150_accel_core_remove(struct device *dev)
> {
> - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> struct bmc150_accel_data *data = iio_priv(indio_dev);
>
> pm_runtime_disable(data->dev);
> @@ -1720,6 +1698,7 @@ static int bmc150_accel_remove(struct i2c_client *client)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(bmc150_accel_core_remove);
>
> #ifdef CONFIG_PM_SLEEP
> static int bmc150_accel_suspend(struct device *dev)
> @@ -1790,48 +1769,8 @@ static int bmc150_accel_runtime_resume(struct device *dev)
> }
> #endif
>
> -static const struct dev_pm_ops bmc150_accel_pm_ops = {
> +const struct dev_pm_ops bmc150_accel_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume)
> SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend,
> bmc150_accel_runtime_resume, NULL)
> };
> -
> -static const struct acpi_device_id bmc150_accel_acpi_match[] = {
> - {"BSBA0150", bmc150},
> - {"BMC150A", bmc150},
> - {"BMI055A", bmi055},
> - {"BMA0255", bma255},
> - {"BMA250E", bma250e},
> - {"BMA222E", bma222e},
> - {"BMA0280", bma280},
> - { },
> -};
> -MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
> -
> -static const struct i2c_device_id bmc150_accel_id[] = {
> - {"bmc150_accel", bmc150},
> - {"bmi055_accel", bmi055},
> - {"bma255", bma255},
> - {"bma250e", bma250e},
> - {"bma222e", bma222e},
> - {"bma280", bma280},
> - {}
> -};
> -
> -MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
> -
> -static struct i2c_driver bmc150_accel_driver = {
> - .driver = {
> - .name = BMC150_ACCEL_DRV_NAME,
> - .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
> - .pm = &bmc150_accel_pm_ops,
> - },
> - .probe = bmc150_accel_probe,
> - .remove = bmc150_accel_remove,
> - .id_table = bmc150_accel_id,
> -};
> -module_i2c_driver(bmc150_accel_driver);
> -
> -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
> -MODULE_LICENSE("GPL v2");
> -MODULE_DESCRIPTION("BMC150 accelerometer driver");
> diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
> new file mode 100644
> index 000000000000..7e036e2eb077
> --- /dev/null
> +++ b/drivers/iio/accel/bmc150-accel-i2c.c
> @@ -0,0 +1,101 @@
> +/*
> + * 3-axis accelerometer driver supporting following I2C Bosch-Sensortec chips:
> + * - BMC150
> + * - BMI055
> + * - BMA255
> + * - BMA250E
> + * - BMA222E
> + * - BMA280
> + *
> + * Copyright (c) 2014, Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/acpi.h>
> +#include <linux/regmap.h>
> +
> +#include "bmc150-accel.h"
> +
> +static const struct regmap_config bmc150_i2c_regmap_conf = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .use_single_rw = true,
> + .cache_type = REGCACHE_NONE,
> +};
> +
> +static int bmc150_accel_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct regmap *regmap;
> + bool block_supported =
> + i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
> + i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK);
> +
> + regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
> + if (IS_ERR(regmap)) {
> + dev_err(&client->dev, "Failed to initialize i2c regmap\n");
> + return PTR_ERR(regmap);
> + }
> +
> + return bmc150_accel_core_probe(&client->dev, regmap, client->irq,
> + id->name, id->driver_data,
> + block_supported);
> +}
> +
> +static int bmc150_accel_remove(struct i2c_client *client)
> +{
> + return bmc150_accel_core_remove(&client->dev);
> +}
> +
> +static const struct acpi_device_id bmc150_accel_acpi_match[] = {
> + {"BSBA0150", bmc150},
> + {"BMC150A", bmc150},
> + {"BMI055A", bmi055},
> + {"BMA0255", bma255},
> + {"BMA250E", bma250e},
> + {"BMA222E", bma222e},
> + {"BMA0280", bma280},
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
> +
> +static const struct i2c_device_id bmc150_accel_id[] = {
> + {"bmc150_accel", bmc150},
> + {"bmi055_accel", bmi055},
> + {"bma255", bma255},
> + {"bma250e", bma250e},
> + {"bma222e", bma222e},
> + {"bma280", bma280},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
> +
> +static struct i2c_driver bmc150_accel_driver = {
> + .driver = {
> + .name = "bmc150_accel_i2c",
> + .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
> + .pm = &bmc150_accel_pm_ops,
> + },
> + .probe = bmc150_accel_probe,
> + .remove = bmc150_accel_remove,
> + .id_table = bmc150_accel_id,
> +};
> +module_i2c_driver(bmc150_accel_driver);
> +
> +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMC150 I2C accelerometer driver");
> diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
> new file mode 100644
> index 000000000000..988b57573d0c
> --- /dev/null
> +++ b/drivers/iio/accel/bmc150-accel.h
> @@ -0,0 +1,21 @@
> +#ifndef _BMC150_ACCEL_H_
> +#define _BMC150_ACCEL_H_
> +
> +struct regmap;
> +
> +enum {
> + bmc150,
> + bmi055,
> + bma255,
> + bma250e,
> + bma222e,
> + bma280,
> +};
> +
> +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> + const char *name, int chip_id,
> + bool block_supported);
> +int bmc150_accel_core_remove(struct device *dev);
> +extern const struct dev_pm_ops bmc150_accel_pm_ops;
> +
> +#endif /* _BMC150_ACCEL_H_ */
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Simon Glass: "Re: [PATCH] arm: rpi: Device tree modifications for U-Boot"
Previous message: Christoph Hellwig: "Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory""
In reply to: Markus Pargmann: "[PATCH 19/20] iio: bmc150: Split the driver into core and i2c"
Next in thread: Markus Pargmann: "[PATCH 04/20] regmap: Do not skip format initialization"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]