[PATCHv2 06/19] staging: rtl8192u: r8192U_core: whitespace neatening to fix consistent spacing code style errors
From: RaphaÃl Beamonte
Date: Tue Aug 18 2015 - 12:58:49 EST
Clean-up the file by using a cleaner spacing around symbols and
words. Mostly use the automatic checkpatch whitespacing fixes.
This takes care of the consistent spacing errors reported by
checkpatch.
Signed-off-by: RaphaÃl Beamonte <raphael.beamonte@xxxxxxxxx>
---
drivers/staging/rtl8192u/r8192U_core.c | 288 ++++++++++++++++-----------------
1 file changed, 144 insertions(+), 144 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index e786237..e0832d1 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -37,17 +37,17 @@ unsigned int __fixunsdfsi(double d)
double __adddf3(double a, double b)
{
- return a+b;
+ return a + b;
}
double __addsf3(float a, float b)
{
- return a+b;
+ return a + b;
}
double __subdf3(double a, double b)
{
- return a-b;
+ return a - b;
}
double __extendsfdf2(float a)
@@ -114,9 +114,9 @@ static int channels = 0x3fff;
-module_param(ifname, charp, S_IRUGO|S_IWUSR);
-module_param(hwwep, int, S_IRUGO|S_IWUSR);
-module_param(channels, int, S_IRUGO|S_IWUSR);
+module_param(ifname, charp, S_IRUGO | S_IWUSR);
+module_param(hwwep, int, S_IRUGO | S_IWUSR);
+module_param(channels, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ifname, " Net interface name, wlan%d=default");
MODULE_PARM_DESC(hwwep, " Try to use hardware security support. ");
@@ -212,7 +212,7 @@ static void CamResetAllEntry(struct net_device *dev)
//2004/02/11 In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP.
// However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest
// In this condition, Cam can not be reset because upper layer will not set this static key again.
- ulcommand |= BIT31|BIT30;
+ ulcommand |= BIT31 | BIT30;
write_nic_dword(dev, RWCAM, ulcommand);
}
@@ -221,14 +221,14 @@ static void CamResetAllEntry(struct net_device *dev)
void write_cam(struct net_device *dev, u8 addr, u32 data)
{
write_nic_dword(dev, WCAMI, data);
- write_nic_dword(dev, RWCAM, BIT31|BIT16|(addr&0xff));
+ write_nic_dword(dev, RWCAM, BIT31 | BIT16 | (addr & 0xff));
}
u32 read_cam(struct net_device *dev, u8 addr)
{
u32 data;
- write_nic_dword(dev, RWCAM, 0x80000000|(addr&0xff));
+ write_nic_dword(dev, RWCAM, 0x80000000 | (addr & 0xff));
read_nic_dword(dev, 0xa8, &data);
return data;
}
@@ -241,7 +241,7 @@ void write_nic_byte_E(struct net_device *dev, int indx, u8 data)
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- indx|0xfe00, 0, &data, 1, HZ / 2);
+ indx | 0xfe00, 0, &data, 1, HZ / 2);
if (status < 0)
netdev_err(dev, "write_nic_byte_E TimeOut! status: %d\n", status);
@@ -255,7 +255,7 @@ int read_nic_byte_E(struct net_device *dev, int indx, u8 *data)
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- indx|0xfe00, 0, data, 1, HZ / 2);
+ indx | 0xfe00, 0, data, 1, HZ / 2);
if (status < 0) {
netdev_err(dev, "%s failure status: %d\n", __func__, status);
@@ -274,7 +274,7 @@ void write_nic_byte(struct net_device *dev, int indx, u8 data)
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
+ (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, &data, 1, HZ / 2);
if (status < 0)
netdev_err(dev, "write_nic_byte TimeOut! status: %d\n", status);
@@ -293,7 +293,7 @@ void write_nic_word(struct net_device *dev, int indx, u16 data)
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
+ (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, &data, 2, HZ / 2);
if (status < 0)
netdev_err(dev, "write_nic_word TimeOut! status: %d\n", status);
@@ -311,7 +311,7 @@ void write_nic_dword(struct net_device *dev, int indx, u32 data)
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
+ (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, &data, 4, HZ / 2);
if (status < 0)
@@ -329,7 +329,7 @@ int read_nic_byte(struct net_device *dev, int indx, u8 *data)
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- (indx&0xff)|0xff00, (indx>>8)&0x0f, data, 1, HZ / 2);
+ (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, data, 1, HZ / 2);
if (status < 0) {
netdev_err(dev, "%s failure status: %d\n", __func__, status);
@@ -349,7 +349,7 @@ int read_nic_word(struct net_device *dev, int indx, u16 *data)
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- (indx&0xff)|0xff00, (indx>>8)&0x0f,
+ (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
data, 2, HZ / 2);
if (status < 0) {
@@ -368,7 +368,7 @@ static int read_nic_word_E(struct net_device *dev, int indx, u16 *data)
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- indx|0xfe00, 0, data, 2, HZ / 2);
+ indx | 0xfe00, 0, data, 2, HZ / 2);
if (status < 0) {
netdev_err(dev, "%s failure status: %d\n", __func__, status);
@@ -387,7 +387,7 @@ int read_nic_dword(struct net_device *dev, int indx, u32 *data)
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
- (indx&0xff)|0xff00, (indx>>8)&0x0f,
+ (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
data, 4, HZ / 2);
if (status < 0) {
@@ -448,7 +448,7 @@ static int proc_get_registers(struct seq_file *m, void *v)
seq_printf(m, "\nD: %2x > ", n);
for (i = 0; i < 16 && n <= max; i++, n++) {
- read_nic_byte(dev, 0x000|n, &byte_rd);
+ read_nic_byte(dev, 0x000 | n, &byte_rd);
seq_printf(m, "%2x ", byte_rd);
}
}
@@ -458,7 +458,7 @@ static int proc_get_registers(struct seq_file *m, void *v)
seq_printf(m, "\nD: %2x > ", n);
for (i = 0; i < 16 && n <= max; i++, n++) {
- read_nic_byte(dev, 0x100|n, &byte_rd);
+ read_nic_byte(dev, 0x100 | n, &byte_rd);
seq_printf(m, "%2x ", byte_rd);
}
}
@@ -468,7 +468,7 @@ static int proc_get_registers(struct seq_file *m, void *v)
seq_printf(m, "\nD: %2x > ", n);
for (i = 0; i < 16 && n <= max; i++, n++) {
- read_nic_byte(dev, 0x300|n, &byte_rd);
+ read_nic_byte(dev, 0x300 | n, &byte_rd);
seq_printf(m, "%2x ", byte_rd);
}
}
@@ -657,14 +657,14 @@ void rtl8192_update_msr(struct net_device *dev)
if (priv->ieee80211->state == IEEE80211_LINKED) {
if (priv->ieee80211->iw_mode == IW_MODE_INFRA)
- msr |= (MSR_LINK_MANAGED<<MSR_LINK_SHIFT);
+ msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
else if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
- msr |= (MSR_LINK_ADHOC<<MSR_LINK_SHIFT);
+ msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
- msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
+ msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
} else {
- msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
+ msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
}
write_nic_byte(dev, MSR, msr);
@@ -714,7 +714,7 @@ static int rtl8192_rx_initiate(struct net_device *dev)
usb_fill_bulk_urb(entry, priv->udev,
usb_rcvbulkpipe(priv->udev, 3), skb_tail_pointer(skb),
RX_URB_SIZE, rtl8192_rx_isr, skb);
- info = (struct rtl8192_rx_info *) skb->cb;
+ info = (struct rtl8192_rx_info *)skb->cb;
info->urb = entry;
info->dev = dev;
info->out_pipe = 3; //denote rx normal packet queue
@@ -735,7 +735,7 @@ static int rtl8192_rx_initiate(struct net_device *dev)
usb_fill_bulk_urb(entry, priv->udev,
usb_rcvbulkpipe(priv->udev, 9), skb_tail_pointer(skb),
RX_URB_SIZE, rtl8192_rx_isr, skb);
- info = (struct rtl8192_rx_info *) skb->cb;
+ info = (struct rtl8192_rx_info *)skb->cb;
info->urb = entry;
info->dev = dev;
info->out_pipe = 9; //denote rx cmd packet queue
@@ -780,9 +780,9 @@ void rtl8192_set_rxconf(struct net_device *dev)
rxconf = rxconf & ~RX_FIFO_THRESHOLD_MASK;
- rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE<<RX_FIFO_THRESHOLD_SHIFT);
+ rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE << RX_FIFO_THRESHOLD_SHIFT);
rxconf = rxconf & ~MAX_RX_DMA_MASK;
- rxconf = rxconf | ((u32)7<<RCR_MXDMA_OFFSET);
+ rxconf = rxconf | ((u32)7 << RCR_MXDMA_OFFSET);
rxconf = rxconf | RCR_ONLYERLPKT;
@@ -809,12 +809,12 @@ void rtl8192_rtx_disable(struct net_device *dev)
struct rtl8192_rx_info *info;
read_nic_byte(dev, CMDR, &cmd);
- write_nic_byte(dev, CMDR, cmd & ~(CR_TE|CR_RE));
+ write_nic_byte(dev, CMDR, cmd & ~(CR_TE | CR_RE));
force_pci_posting(dev);
mdelay(10);
while ((skb = __skb_dequeue(&priv->rx_queue))) {
- info = (struct rtl8192_rx_info *) skb->cb;
+ info = (struct rtl8192_rx_info *)skb->cb;
if (!info->urb)
continue;
@@ -872,7 +872,7 @@ inline u16 rtl8192_rate2rate(short rate)
/* The prototype of rx_isr has changed since one version of Linux Kernel */
static void rtl8192_rx_isr(struct urb *urb)
{
- struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
struct net_device *dev = info->dev;
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -905,7 +905,7 @@ static void rtl8192_rx_isr(struct urb *urb)
usb_rcvbulkpipe(priv->udev, out_pipe), skb_tail_pointer(skb),
RX_URB_SIZE, rtl8192_rx_isr, skb);
- info = (struct rtl8192_rx_info *) skb->cb;
+ info = (struct rtl8192_rx_info *)skb->cb;
info->urb = urb;
info->dev = dev;
info->out_pipe = out_pipe;
@@ -1065,7 +1065,7 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
net = &priv->ieee80211->current_network;
for (i = 0; i < net->rates_len; i++) {
- basic_rate = net->rates[i]&0x7f;
+ basic_rate = net->rates[i] & 0x7f;
switch (basic_rate) {
case MGN_1M:
*rate_config |= RRSR_1M;
@@ -1106,7 +1106,7 @@ static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
}
}
for (i = 0; i < net->rates_ex_len; i++) {
- basic_rate = net->rates_ex[i]&0x7f;
+ basic_rate = net->rates_ex[i] & 0x7f;
switch (basic_rate) {
case MGN_1M:
*rate_config |= RRSR_1M;
@@ -1163,7 +1163,7 @@ static void rtl8192_update_cap(struct net_device *dev, u16 cap)
tmp |= BRSR_AckShortPmb;
write_nic_dword(dev, RRSR, tmp);
- if (net->mode & (IEEE_G|IEEE_N_24G)) {
+ if (net->mode & (IEEE_G | IEEE_N_24G)) {
u8 slot_time = 0;
if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) /* short slot time */
slot_time = SHORT_SLOT_TIME;
@@ -1187,7 +1187,7 @@ static void rtl8192_net_update(struct net_device *dev)
priv->basic_rate = rate_config & 0x15f;
write_nic_dword(dev, BSSIDR, ((u32 *)net->bssid)[0]);
- write_nic_word(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
+ write_nic_word(dev, BSSIDR + 4, ((u16 *)net->bssid)[2]);
rtl8192_update_msr(dev);
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) {
@@ -1196,9 +1196,9 @@ static void rtl8192_net_update(struct net_device *dev)
write_nic_word(dev, BCN_INTERVAL, net->beacon_interval);
write_nic_word(dev, BCN_DRV_EARLY_INT, 1);
write_nic_byte(dev, BCN_ERR_THRESH, 100);
- BcnTimeCfg |= (BcnCW<<BCN_TCFG_CW_SHIFT);
+ BcnTimeCfg |= (BcnCW << BCN_TCFG_CW_SHIFT);
// TODO: BcnIFS may required to be changed on ASIC
- BcnTimeCfg |= BcnIFS<<BCN_TCFG_IFS;
+ BcnTimeCfg |= BcnIFS << BCN_TCFG_IFS;
write_nic_word(dev, BCN_TCFG, BcnTimeCfg);
}
@@ -1453,7 +1453,7 @@ static u8 MRateToHwRate8190Pci(u8 rate)
case MGN_MCS15:
ret = DESC90_RATEMCS15;
break;
- case (0x80|0x20):
+ case (0x80 | 0x20):
ret = DESC90_RATEMCS32;
break;
@@ -1517,7 +1517,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
/* Fill Tx firmware info */
memset(tx_fwinfo, 0, sizeof(tx_fwinfo_819x_usb));
/* DWORD 0 */
- tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80) ? 1 : 0;
+ tx_fwinfo->TxHT = (tcb_desc->data_rate & 0x80) ? 1 : 0;
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
@@ -1525,7 +1525,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_fwinfo->AllowAggregation = 1;
/* DWORD 1 */
tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
- tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
+ tx_fwinfo->RxAMD = tcb_desc->ampdu_density & 0x07;
} else {
tx_fwinfo->AllowAggregation = 0;
/* DWORD 1 */
@@ -1537,7 +1537,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable) ? 1 : 0;
tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable) ? 1 : 0;
tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC) ? 1 : 0;
- tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80) ? 1 : 0;
+ tx_fwinfo->RtsHT = (tcb_desc->rts_rate & 0x80) ? 1 : 0;
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->RTSSC) : 0;
tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1) ? ((tcb_desc->bRTSBW) ? 1 : 0) : 0;
@@ -1655,13 +1655,13 @@ static short rtl8192_usb_initendpoints(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- priv->rx_urb = kmalloc(sizeof(struct urb *) * (MAX_RX_URB+1),
+ priv->rx_urb = kmalloc(sizeof(struct urb *) * (MAX_RX_URB + 1),
GFP_KERNEL);
if (priv->rx_urb == NULL)
return -ENOMEM;
#ifndef JACKSON_NEW_RX
- for (i = 0; i < (MAX_RX_URB+1); i++) {
+ for (i = 0; i < (MAX_RX_URB + 1); i++) {
priv->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -1715,7 +1715,7 @@ static void rtl8192_usb_deleteendpoints(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
if (priv->rx_urb) {
- for (i = 0; i < (MAX_RX_URB+1); i++) {
+ for (i = 0; i < (MAX_RX_URB + 1); i++) {
usb_kill_urb(priv->rx_urb[i]);
usb_free_urb(priv->rx_urb[i]);
}
@@ -1738,7 +1738,7 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev)
#ifndef JACKSON_NEW_RX
if (priv->rx_urb) {
- for (i = 0; i < (MAX_RX_URB+1); i++) {
+ for (i = 0; i < (MAX_RX_URB + 1); i++) {
usb_kill_urb(priv->rx_urb[i]);
kfree(priv->rx_urb[i]->transfer_buffer);
usb_free_urb(priv->rx_urb[i]);
@@ -1833,7 +1833,7 @@ static void rtl8192_qos_activate(struct work_struct *work)
/* update the ac parameter to related registers */
for (i = 0; i < QOS_QUEUE_NUM; i++) {
//Mode G/A: slotTimeTimer = 9; Mode B: 20
- u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ? 9 : 20) + aSifsTime;
+ u1bAIFS = qos_parameters->aifs[i] * ((mode & (IEEE_G | IEEE_N_24G)) ? 9 : 20) + aSifsTime;
u1bAIFS <<= AC_PARAM_AIFS_OFFSET;
op_limit = (u32)le16_to_cpu(qos_parameters->tx_op_limit[i]);
op_limit <<= AC_PARAM_TXOP_LIMIT_OFFSET;
@@ -2005,7 +2005,7 @@ static void rtl8192_update_ratr_table(struct net_device *dev)
ratr_value |= 0x80000000;
else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz)
ratr_value |= 0x80000000;
- write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
+ write_nic_dword(dev, RATR0 + rate_index * 4, ratr_value);
write_nic_byte(dev, UFWP, 1);
}
@@ -2066,10 +2066,10 @@ static u8 rtl8192_getSupportedWireleeMode(struct net_device *dev)
case RF_8225:
case RF_8256:
case RF_PSEUDO_11N:
- ret = WIRELESS_MODE_N_24G|WIRELESS_MODE_G|WIRELESS_MODE_B;
+ ret = WIRELESS_MODE_N_24G | WIRELESS_MODE_G | WIRELESS_MODE_B;
break;
case RF_8258:
- ret = WIRELESS_MODE_A|WIRELESS_MODE_N_5G;
+ ret = WIRELESS_MODE_A | WIRELESS_MODE_N_5G;
break;
default:
ret = WIRELESS_MODE_B;
@@ -2082,7 +2082,7 @@ static void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
struct r8192_priv *priv = ieee80211_priv(dev);
u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
- if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode) == 0)) {
+ if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode & bSupportMode) == 0)) {
if (bSupportMode & WIRELESS_MODE_N_24G) {
wireless_mode = WIRELESS_MODE_N_24G;
} else if (bSupportMode & WIRELESS_MODE_N_5G) {
@@ -2182,30 +2182,30 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
priv->EarlyRxThreshold = 7;
priv->enable_gpio0 = 0;
priv->TransmitConfig =
- (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
- (priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
- (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
+ (TCR_MXDMA_2048 << TCR_MXDMA_OFFSET) | // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
+ (priv->ShortRetryLimit << TCR_SRL_OFFSET) | // Short retry limit
+ (priv->LongRetryLimit << TCR_LRL_OFFSET) | // Long retry limit
(false ? TCR_SAT : 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
#ifdef TO_DO_LIST
if (Adapter->bInHctTest)
pHalData->ReceiveConfig = pHalData->CSMethod |
- RCR_AMF | RCR_ADF | //accept management/data
+ RCR_AMF | RCR_ADF | //accept management/data
//guangan200710
- RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
- RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
- RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
- ((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
- (pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
+ RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
+ RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
+ RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
+ ((u32)7 << RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Tx DMA Burst, 7: unlimited.
+ (pHalData->EarlyRxThreshold << RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
(pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt : 0);
else
#endif
priv->ReceiveConfig =
- RCR_AMF | RCR_ADF | //accept management/data
- RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
- RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
- ((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
- (priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
+ RCR_AMF | RCR_ADF | //accept management/data
+ RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
+ RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
+ ((u32)7 << RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
+ (priv->EarlyRxThreshold << RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
(priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT : 0);
priv->AcmControl = 0;
@@ -2298,13 +2298,13 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
}
if (bLoad_From_EEPOM) {
- tmpValue = eprom_read(dev, EEPROM_VID>>1);
+ tmpValue = eprom_read(dev, EEPROM_VID >> 1);
priv->eeprom_vid = endian_swap(&tmpValue);
- priv->eeprom_pid = eprom_read(dev, EEPROM_PID>>1);
- tmpValue = eprom_read(dev, EEPROM_ChannelPlan>>1);
- priv->eeprom_ChannelPlan = (tmpValue & 0xff00)>>8;
+ priv->eeprom_pid = eprom_read(dev, EEPROM_PID >> 1);
+ tmpValue = eprom_read(dev, EEPROM_ChannelPlan >> 1);
+ priv->eeprom_ChannelPlan = (tmpValue & 0xff00) >> 8;
priv->btxpowerdata_readfromEEPORM = true;
- priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID>>1)) >>8;
+ priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID >> 1)) >> 8;
} else {
priv->eeprom_vid = 0;
priv->eeprom_pid = 0;
@@ -2319,7 +2319,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
int i;
for (i = 0; i < 6; i += 2) {
u16 tmp = 0;
- tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
+ tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i) >> 1));
*(u16 *)(&dev->dev_addr[i]) = tmp;
}
} else {
@@ -2333,54 +2333,54 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
if (priv->card_8192_version == (u8)VERSION_819xU_A) {
//read Tx power gain offset of legacy OFDM to HT rate
if (bLoad_From_EEPOM)
- priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff>>1))&0xff00) >> 8;
+ priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff >> 1)) & 0xff00) >> 8;
else
priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower;
RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff);
//read ThermalMeter from EEPROM
if (bLoad_From_EEPOM)
- priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter>>1))&0x00ff);
+ priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter >> 1)) & 0x00ff);
else
priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter);
//vivi, for tx power track
- priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+ priv->TSSI_13dBm = priv->EEPROMThermalMeter * 100;
//read antenna tx power offset of B/C/D to A from EEPROM
if (bLoad_From_EEPOM)
- priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff>>1))&0x0f00)>>8;
+ priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff >> 1)) & 0x0f00) >> 8;
else
priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff);
// Read CrystalCap from EEPROM
if (bLoad_From_EEPOM)
- priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap>>1))&0x0f);
+ priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap >> 1)) & 0x0f);
else
priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap);
//get per-channel Tx power level
if (bLoad_From_EEPOM)
- priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver>>1))&0xff00)>>8;
+ priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver >> 1)) & 0xff00) >> 8;
else
priv->EEPROM_Def_Ver = 1;
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
if (priv->EEPROM_Def_Ver == 0) { /* old eeprom definition */
int i;
if (bLoad_From_EEPOM)
- priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
+ priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK >> 1)) & 0xff) >> 8;
else
priv->EEPROMTxPowerLevelCCK = 0x10;
RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
for (i = 0; i < 3; i++) {
if (bLoad_From_EEPOM) {
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G+i)>>1);
- if (((EEPROM_TxPwIndex_OFDM_24G+i) % 2) == 0)
+ tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G + i) >> 1);
+ if (((EEPROM_TxPwIndex_OFDM_24G + i) % 2) == 0)
tmpValue = tmpValue & 0x00ff;
else
tmpValue = (tmpValue & 0xff00) >> 8;
} else {
tmpValue = 0x10;
}
- priv->EEPROMTxPowerLevelOFDM24G[i] = (u8) tmpValue;
+ priv->EEPROMTxPowerLevelOFDM24G[i] = (u8)tmpValue;
RT_TRACE(COMP_EPROM, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK);
}
} else if (priv->EEPROM_Def_Ver == 1) {
@@ -2394,7 +2394,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue;
if (bLoad_From_EEPOM)
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2)>>1);
+ tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2) >> 1);
else
tmpValue = 0x1010;
*((u16 *)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
@@ -2405,7 +2405,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
tmpValue = 0x1010;
*((u16 *)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
if (bLoad_From_EEPOM)
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1+2)>>1);
+ tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1 + 2) >> 1);
else
tmpValue = 0x10;
priv->EEPROMTxPowerLevelOFDM24G[2] = (u8)tmpValue;
@@ -2443,7 +2443,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
// Antenna B gain offset to antenna A, bit0~3
priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
// Antenna C gain offset to antenna A, bit4~7
- priv->AntennaTxPwDiff[1] = (priv->EEPROMTxPowerDiff & 0xf0)>>4;
+ priv->AntennaTxPwDiff[1] = (priv->EEPROMTxPowerDiff & 0xf0) >> 4;
// CrystalCap, bit12~15
priv->CrystalCap = priv->EEPROMCrystalCap;
// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
@@ -2570,7 +2570,7 @@ static void rtl8192_hwconfig(struct net_device *dev)
regRRSR = RATE_ALL_CCK;
break;
case WIRELESS_MODE_A:
- regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
+ regBwOpMode = BW_OPMODE_5G | BW_OPMODE_20MHZ;
regRATR = RATE_ALL_OFDM_AG;
regRRSR = RATE_ALL_OFDM_AG;
break;
@@ -2686,13 +2686,13 @@ static bool rtl8192_adapter_start(struct net_device *dev)
//xiong add for new bitfile:usb suspend reset pin set to 1. //do we need?
read_nic_byte_E(dev, 0x5f, &tmp);
- write_nic_byte_E(dev, 0x5f, tmp|0x20);
+ write_nic_byte_E(dev, 0x5f, tmp | 0x20);
//Set Hardware
rtl8192_hwconfig(dev);
//turn on Tx/Rx
- write_nic_byte(dev, CMDR, CR_RE|CR_TE);
+ write_nic_byte(dev, CMDR, CR_RE | CR_TE);
//set IDR0 here
write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
@@ -2705,12 +2705,12 @@ static bool rtl8192_adapter_start(struct net_device *dev)
write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
+ NUM_OF_PAGE_IN_FW_QUEUE_VO << RSVD_FW_QUEUE_PAGE_VO_SHIFT);
write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
- write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
- NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
- write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
+ write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW |
+ NUM_OF_PAGE_IN_FW_QUEUE_BCN << RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
+ write_nic_dword(dev, RATR0 + 4 * 7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
//Set AckTimeout
// TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
@@ -2739,7 +2739,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
rtl8192_phy_configmac(dev);
- if (priv->card_8192_version == (u8) VERSION_819xU_A) {
+ if (priv->card_8192_version == (u8)VERSION_819xU_A) {
rtl8192_phy_getTxPower(dev);
rtl8192_phy_setTxPower(dev, priv->chan);
}
@@ -2755,18 +2755,18 @@ static bool rtl8192_adapter_start(struct net_device *dev)
#ifdef TO_DO_LIST
if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
+ RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those actions will be discard in MgntActSet_RF_State because of the same state
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
+ RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
} else {
pHalData->eRFPowerState = eRfOn;
pMgntInfo->RfOffReason = 0;
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
+ RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
}
} else {
if (pHalData->eRFPowerState == eRfOff) {
@@ -2826,7 +2826,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
for (i = 0; i < CCKTxBBGainTableLength; i++) {
if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0]) {
- priv->cck_present_attentuation_20Mdefault = (u8) i;
+ priv->cck_present_attentuation_20Mdefault = (u8)i;
break;
}
}
@@ -2914,9 +2914,9 @@ static bool HalRxCheckStuck819xUsb(struct net_device *dev)
// If rssi is small, we should check rx for long time because of bad rx.
// or maybe it will continuous silent reset every 2 seconds.
rx_chk_cnt++;
- if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5)) {
+ if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High + 5)) {
rx_chk_cnt = 0; //high rssi, check rx stuck right now.
- } else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
+ } else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High + 5) &&
((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) ||
(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M))) {
if (rx_chk_cnt < 2)
@@ -3191,7 +3191,7 @@ static void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
*TotalRxBcnNum = 0;
*TotalRxDataNum = 0;
- SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum);
+ SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++) % (priv->ieee80211->LinkDetectInfo.SlotNum);
priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod;
priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod;
for (i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++) {
@@ -3231,7 +3231,7 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
if (priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA) {
rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum);
- if ((TotalRxBcnNum+TotalRxDataNum) == 0) {
+ if ((TotalRxBcnNum + TotalRxDataNum) == 0) {
#ifdef TODO
if (rfState == eRfOff)
RT_TRACE(COMP_ERR, "========>%s()\n", __func__);
@@ -3267,7 +3267,7 @@ static void rtl819x_watchdog_wqcallback(struct work_struct *work)
static void watch_dog_timer_callback(unsigned long data)
{
- struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
+ struct r8192_priv *priv = ieee80211_priv((struct net_device *)data);
queue_delayed_work(priv->priv_wq, &priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
}
@@ -3289,7 +3289,7 @@ static int _rtl8192_up(struct net_device *dev)
if (priv->ieee80211->state != IEEE80211_LINKED)
ieee80211_softmac_start_protocol(priv->ieee80211);
ieee80211_reset_queue(priv->ieee80211);
- watch_dog_timer_callback((unsigned long) dev);
+ watch_dog_timer_callback((unsigned long)dev);
if (!netif_queue_stopped(dev))
netif_start_queue(dev);
else
@@ -3629,7 +3629,7 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate)
ret_rate = MGN_MCS15;
break;
case DESC90_RATEMCS32:
- ret_rate = 0x80|0x20;
+ ret_rate = 0x80 | 0x20;
break;
default:
@@ -3732,7 +3732,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
slide_rssi_index = 0;
// <1> Showed on UI for user, in dbm
- tmp_val = priv->stats.slide_rssi_total/slide_rssi_statistics;
+ tmp_val = priv->stats.slide_rssi_total / slide_rssi_statistics;
priv->stats.signal_strength = rtl819x_translate_todbm((u8)tmp_val);
pcurrent_stats->rssi = priv->stats.signal_strength;
//
@@ -3769,13 +3769,13 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath];
if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) {
priv->stats.rx_rssi_percentage[rfpath] =
- ((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
+ ((priv->stats.rx_rssi_percentage[rfpath] * (Rx_Smooth_Factor - 1)) +
+ (pprevious_stats->RxMIMOSignalStrength[rfpath])) / (Rx_Smooth_Factor);
priv->stats.rx_rssi_percentage[rfpath] = priv->stats.rx_rssi_percentage[rfpath] + 1;
} else {
priv->stats.rx_rssi_percentage[rfpath] =
- ((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
+ ((priv->stats.rx_rssi_percentage[rfpath] * (Rx_Smooth_Factor - 1)) +
+ (pprevious_stats->RxMIMOSignalStrength[rfpath])) / (Rx_Smooth_Factor);
}
RT_TRACE(COMP_DBG, "priv->stats.rx_rssi_percentage[rfPath] = %d \n", priv->stats.rx_rssi_percentage[rfpath]);
}
@@ -3801,7 +3801,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
slide_beacon_adc_pwdb_index++;
if (slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX)
slide_beacon_adc_pwdb_index = 0;
- pprevious_stats->RxPWDBAll = priv->stats.Slide_Beacon_Total/slide_beacon_adc_pwdb_statistics;
+ pprevious_stats->RxPWDBAll = priv->stats.Slide_Beacon_Total / slide_beacon_adc_pwdb_statistics;
if (pprevious_stats->RxPWDBAll >= 3)
pprevious_stats->RxPWDBAll -= 3;
}
@@ -3816,13 +3816,13 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) {
priv->undecorated_smoothed_pwdb =
- (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
+ (((priv->undecorated_smoothed_pwdb) * (Rx_Smooth_Factor - 1)) +
+ (pprevious_stats->RxPWDBAll)) / (Rx_Smooth_Factor);
priv->undecorated_smoothed_pwdb = priv->undecorated_smoothed_pwdb + 1;
} else {
priv->undecorated_smoothed_pwdb =
- (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
+ (((priv->undecorated_smoothed_pwdb) * (Rx_Smooth_Factor - 1)) +
+ (pprevious_stats->RxPWDBAll)) / (Rx_Smooth_Factor);
}
}
@@ -3846,7 +3846,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
slide_evm_index = 0;
// <1> Showed on UI for user, in percentage.
- tmp_val = priv->stats.slide_evm_total/slide_evm_statistics;
+ tmp_val = priv->stats.slide_evm_total / slide_evm_statistics;
priv->stats.signal_quality = tmp_val;
//cosa add 10/11/2007, Showed on UI for user in Windows Vista, for Link quality.
priv->stats.last_signal_strength_inpercent = tmp_val;
@@ -3859,8 +3859,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) /* initialize */
priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
priv->stats.rx_evm_percentage[nspatial_stream] =
- ((priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) +
- (pprevious_stats->RxMIMOSignalQuality[nspatial_stream]* 1)) / (Rx_Smooth_Factor);
+ ((priv->stats.rx_evm_percentage[nspatial_stream] * (Rx_Smooth_Factor - 1)) +
+ (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] * 1)) / (Rx_Smooth_Factor);
}
}
}
@@ -4048,16 +4048,16 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
report >>= 5;
switch (report) {
case 0x3:
- rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f) << 1);
break;
case 0x2:
- rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f) << 1);
break;
case 0x1:
- rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f) << 1);
break;
case 0x0:
- rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
+ rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f) << 1);
break;
}
}
@@ -4080,7 +4080,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
else if (pcck_buf->sq_rpt < 20)
sq = 100;
else
- sq = ((64-sq) * 100) / 44;
+ sq = ((64 - sq) * 100) / 44;
}
pstats->SignalQuality = precord_stats->SignalQuality = sq;
pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
@@ -4103,7 +4103,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
//Fixed by Jacken from Bryant 2008-03-20
//Original value is 106
- rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
+ rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i] & 0x3F) * 2) - 106;
//Get Rx snr value in DB
tmp_rxsnr = pofdm_buf->rxsnr_X[i];
@@ -4116,8 +4116,8 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
total_rssi += RSSI;
/* Record Signal Strength for next packet */
- pstats->RxMIMOSignalStrength[i] = (u8) RSSI;
- precord_stats->RxMIMOSignalStrength[i] = (u8) RSSI;
+ pstats->RxMIMOSignalStrength[i] = (u8)RSSI;
+ precord_stats->RxMIMOSignalStrength[i] = (u8)RSSI;
}
@@ -4126,7 +4126,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
//
//Fixed by Jacken from Bryant 2008-03-20
//Original value is 106
- rx_pwr_all = (((pofdm_buf->pwdb_all) >> 1)& 0x7f) -106;
+ rx_pwr_all = (((pofdm_buf->pwdb_all) >> 1) & 0x7f) - 106;
pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
@@ -4161,7 +4161,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
if (pdrvinfo->BW) /* 40M channel */
- priv->stats.received_bwtype[1+prxsc->rxsc]++;
+ priv->stats.received_bwtype[1 + prxsc->rxsc]++;
else //20M channel
priv->stats.received_bwtype[0]++;
}
@@ -4394,7 +4394,7 @@ static void query_rxdesc_status(struct sk_buff *skb,
stats->RxBufShift = 0;
stats->bICV = desc->ICV;
stats->bCRC = desc->CRC32;
- stats->bHwError = stats->bCRC|stats->bICV;
+ stats->bHwError = stats->bCRC | stats->bICV;
/* RTL8190 set this bit to indicate that Hw does not decrypt packet */
stats->Decrypted = !desc->SWDec;
@@ -4402,7 +4402,7 @@ static void query_rxdesc_status(struct sk_buff *skb,
(priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
stats->bHwError = false;
else
- stats->bHwError = stats->bCRC|stats->bICV;
+ stats->bHwError = stats->bCRC | stats->bICV;
if (stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
stats->bHwError |= 1;
@@ -4573,7 +4573,7 @@ static void query_rx_cmdpkt_desc_status(struct sk_buff *skb,
stats->Length = desc->Length;
stats->RxDrvInfoSize = 0;
stats->RxBufShift = 0;
- stats->packetlength = stats->Length-scrclng;
+ stats->packetlength = stats->Length - scrclng;
stats->fraglength = stats->packetlength;
stats->fragoffset = 0;
stats->ntotalfrag = 1;
@@ -4679,11 +4679,11 @@ static int rtl8192_usb_probe(struct usb_interface *intf,
dev->netdev_ops = &rtl8192_netdev_ops;
- dev->wireless_handlers = (struct iw_handler_def *) &r8192_wx_handlers_def;
+ dev->wireless_handlers = (struct iw_handler_def *)&r8192_wx_handlers_def;
dev->type = ARPHRD_ETHER;
- dev->watchdog_timeo = HZ*3; //modified by john, 0805
+ dev->watchdog_timeo = HZ * 3;
if (dev_alloc_name(dev, ifname) < 0) {
RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
@@ -4844,7 +4844,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
ieee->hwsec_active = 1;
- if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) { /* add hwsec_support flag to totol control hw_sec on/off */
+ if ((ieee->pHTInfo->IOTAction & HT_IOT_ACT_PURE_N_MODE) || !hwwep) { /* add hwsec_support flag to totol control hw_sec on/off */
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
}
@@ -4867,33 +4867,33 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr%pM\n", dev, EntryNo, KeyIndex, KeyType, MacAddr);
if (DefaultKey)
- usConfig |= BIT15 | (KeyType<<2);
+ usConfig |= BIT15 | (KeyType << 2);
else
- usConfig |= BIT15 | (KeyType<<2) | KeyIndex;
+ usConfig |= BIT15 | (KeyType << 2) | KeyIndex;
for (i = 0; i < CAM_CONTENT_COUNT; i++) {
- TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
- TargetCommand |= BIT31|BIT16;
+ TargetCommand = i + CAM_CONTENT_COUNT * EntryNo;
+ TargetCommand |= BIT31 | BIT16;
if (i == 0) { /* MAC|Config */
- TargetContent = (u32)(*(MacAddr+0)) << 16|
- (u32)(*(MacAddr+1)) << 24|
+ TargetContent = (u32)(*(MacAddr + 0)) << 16 |
+ (u32)(*(MacAddr + 1)) << 24 |
(u32)usConfig;
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
} else if (i == 1) { /* MAC */
- TargetContent = (u32)(*(MacAddr+2)) |
- (u32)(*(MacAddr+3)) << 8|
- (u32)(*(MacAddr+4)) << 16|
- (u32)(*(MacAddr+5)) << 24;
+ TargetContent = (u32)(*(MacAddr + 2)) |
+ (u32)(*(MacAddr + 3)) << 8 |
+ (u32)(*(MacAddr + 4)) << 16 |
+ (u32)(*(MacAddr + 5)) << 24;
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
} else {
//Key Material
if (KeyContent != NULL) {
- write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)));
+ write_nic_dword(dev, WCAMI, (u32)(*(KeyContent + i - 2)));
write_nic_dword(dev, RWCAM, TargetCommand);
}
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/