[PATCH 3/3] mtd: spi-nor: sf: Add clear flag status register support

From: Jagan Teki
Date: Wed Aug 19 2015 - 05:57:23 EST


The clear flag status register operation was required by Micron
SPI-NOR chips, which support FSR. And if an error bit of FSR
have been set like protection, voltage, erase, and program,
it must be cleared by the clear FSR operation.

Signed-off-by: Jagan Teki <jteki@xxxxxxxxxxxx>
Cc: Hou Zhiqiang <B48286@xxxxxxxxxxxxx>
Cc: Mingkai.Hu <Mingkai.Hu@xxxxxxxxxxxxx>
Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Cc: Brian Norris <computersforpeace@xxxxxxxxx>
---
drivers/mtd/spi-nor/spi-nor.c | 35 +++++++++++++++++++++++++++++++----
include/linux/mtd/spi-nor.h | 9 +++++++++
2 files changed, 40 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f954d03..c5c472d5 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -100,6 +100,28 @@ static int read_fsr(struct spi_nor *nor)
}

/*
+ * Read the clear flag status register.
+ * The clear flag status register operation was required by Micron
+ * SPI-NOR chips, which support FSR. And if an error bit of FSR
+ * have been set like protection, voltage, erase, and program,
+ * it must be cleared by the clear FSR operation.
+ * Returns zero for FSR bits cleared and negative if error occurred.
+ */
+static int read_cfsr(struct spi_nor *nor)
+{
+ int ret;
+ u8 val;
+
+ ret = nor->read_reg(nor, SPINOR_OP_RDCFSR, &val, 1);
+ if (ret < 0) {
+ pr_err("error %d reading CFSR\n", ret);
+ return ret;
+ }
+
+ return val;
+}
+
+/*
* Read configuration register, returning its value in the
* location. Return the configuration register value.
* Returns negative if error occured.
@@ -209,10 +231,15 @@ static inline int spi_nor_sr_ready(struct spi_nor *nor)
static inline int spi_nor_fsr_ready(struct spi_nor *nor)
{
int fsr = read_fsr(nor);
- if (fsr < 0)
- return fsr;
- else
- return fsr & FSR_READY;
+ if (fsr & FSR_ERR_MASK) {
+ pr_err("flag status(0x%x) error occured\n", fsr);
+ int cfsr = read_cfsr(nor);
+ if (cfsr < 0)
+ return cfsr;
+ return -1;
+ }
+
+ return fsr & FSR_READY;
}

static int spi_nor_ready(struct spi_nor *nor)
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index c5a58c4..36c1681 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -35,6 +35,7 @@
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
+#define SPINOR_OP_RDCFSR 0x50 /* Read clear flag status register */

/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */
@@ -74,6 +75,14 @@
/* Enhanced Volatile Configuration Register bits */
#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */

+/* Flag Status Register Error bits */
+#define FSR_ERR_PROT 0x2 /* Protection */
+#define FSR_ERR_VOLT 0x8 /* Voltage on Vpp */
+#define FSR_ERR_PROG 0x10 /* Program operation */
+#define FSR_ERR_ERASE 0x20 /* Erase operation */
+#define FSR_ERR_MASK (FSR_ERR_PROT | FSR_ERR_VOLT | \
+ FSR_ERR_PROG | FSR_ERR_ERASE)
+
/* Flag Status Register bits */
#define FSR_READY 0x80

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/