[PATCH-v2 2/5] mfd: 88pm800: Update the header file with 32K clk related macros

From: Vaibhav Hiremath
Date: Mon Aug 24 2015 - 14:59:14 EST


Update header file with required macros for 32KHz buffered clock
output of 88PM800 family of device.
These macros will be used in clk provider driver.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
---
include/linux/mfd/88pm80x.h | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 122cfd2..0215d5f 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -91,6 +91,7 @@ enum {
/* Referance and low power registers */
#define PM800_LOW_POWER1 (0x20)
#define PM800_LOW_POWER2 (0x21)
+#define PM800_LOW_POWER2_XO_LJ_EN BIT(5)

#define PM800_LOW_POWER_CONFIG3 (0x22)
#define PM800_LDOBK_FREEZE BIT(7)
@@ -138,6 +139,13 @@ enum {
#define PM800_ALARM BIT(5)
#define PM800_RTC1_USE_XO BIT(7)

+#define PM800_32K_OUTX_SEL_MASK 0x3
+/* 32KHz clk output sel mode */
+#define PM800_32K_OUTX_SEL_ZERO 0x0
+#define PM800_32K_OUTX_SEL_INT_32KHZ 0x1
+#define PM800_32K_OUTX_SEL_XO_32KHZ 0x2
+#define PM800_32K_OUTX_SEL_HIZ 0x3
+
/* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */

/* buck registers */
@@ -208,6 +216,10 @@ enum {
#define PM800_PMOD_MEAS1 0x52
#define PM800_PMOD_MEAS2 0x53

+/* Oscillator control */
+#define PM800_OSC_CNTRL1 0x50
+#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1)
+
#define PM800_GPADC0_MEAS1 0x54
#define PM800_GPADC0_MEAS2 0x55
#define PM800_GPADC1_MEAS1 0x56
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/