RE: Chipidea ULPI driver

[Subbaraya Sundeep Bhatta]

Hi,

> -----Original Message-----
> From: Subbaraya Sundeep Bhatta
> Sent: Friday, September 11, 2015 5:04 PM
> To: 'Peter Chen'; Punnaiah Choudary Kalluri
> Cc: balbi@xxxxxx; linux-usb@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> Greg Kroah-Hartman (gregkh@xxxxxxxxxxxxxxxxxxx); kishon@xxxxxx
> Subject: RE: Chipidea ULPI driver
>
> Hi,
>
> > -----Original Message-----
> > From: Peter Chen [mailto:peter.chen@xxxxxxxxxxxxx]
> > Sent: Friday, September 11, 2015 6:52 AM
> > To: Punnaiah Choudary Kalluri
> > Cc: balbi@xxxxxx; Subbaraya Sundeep Bhatta; linux-usb@xxxxxxxxxxxxxxx;
> > linux- kernel@xxxxxxxxxxxxxxx; Greg Kroah-Hartman
> > (gregkh@xxxxxxxxxxxxxxxxxxx); kishon@xxxxxx
> > Subject: Re: Chipidea ULPI driver
> >
> > On Thu, Sep 10, 2015 at 02:57:49PM +0000, Punnaiah Choudary Kalluri
> wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Felipe Balbi [mailto:balbi@xxxxxx]
> > > > Sent: Thursday, September 10, 2015 8:14 PM
> > > > To: Subbaraya Sundeep Bhatta
> > > > Cc: Peter Chen; balbi@xxxxxx; linux-usb@xxxxxxxxxxxxxxx; linux-
> > > > kernel@xxxxxxxxxxxxxxx; Greg Kroah-Hartman
> > > > (gregkh@xxxxxxxxxxxxxxxxxxx); kishon@xxxxxx; Punnaiah Choudary
> > > > Kalluri
> > > > Subject: Re: Chipidea ULPI driver
> > > >
> > > > (break your lines at 80-characters)
> > > >
> > > > On Thu, Sep 10, 2015 at 12:44:58PM +0000, Subbaraya Sundeep Bhatta
> > wrote:
> > > > > Hi Peter,
> > > > >
> > > > > We are using NOP transceiver driver for USB3320 ULPI PHY with
> > > > > ChipIdea controller.
> > > > >
> > > > > Recently we found that one of the boards (zedboard) requires PHY
> > > > > register access to set VBUS.
> > > > >
> > > > > Note that our local driver we had before migrating to ChipIdea
> > > > > driver calls otg_ulpi_create with flags  ULPI_OTG_DRVVBUS |
> > > > > ULPI_OTG_DRVVBUS_EXT so that VBUS is enabled at initialization.
> > > > >
> > > > > Can you please let me know how to do this with ChipIdea case? I
> > > > > see the following solutions:
> > > > >
> > > > > 1. Write ULPI driver for USB3320 similar to tusb1210.
> > > >
> > > > this
> > >
> > > How about extending the phy-ulpi driver to use it as platform driver?
> > > So that boards that are using the ulpi compatible phy and driving
> > > vbus from the phy can use this driver.
> > >
> >
> > Yes, you can improve phy-ulpi driver, and it can not depend on NOP
> > transceiver driver.
>
> AFAIK phy-ulpi.c is just exporting functions and not registering to platform bus
> since it is not connected to SOC bus. I don't think we can create platform driver
> for this. I have read TUSB1210 data sheet and it is similar to USB3320 with no
> additional SOC bus connection and has only ULPI interface.

Sorry, I mean external PHY here.

> So it should register to ULPI bus which is in kernel recently. I will make changes
> to chipidea similar to dwc3(adding ulpi.c) and write driver similar to tusb1210.c.
> Is that okay?
>
> Thanks,
> Sundeep
>
> >
> > --
> >
> > Best Regards,
> > Peter Chen


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/