[PATCH] thermal: imx: register irq handler later in probe

From: Bai Ping
Date: Sun Sep 13 2015 - 23:06:46 EST


The irq handler should be registered after the tempmon
module has been initialized in a known state and the
thermal_zone and cpu_cooling device have been registered
successfully. Otherwise, if the irq is triggled earlier
before thermal probe has been finished, it may lead to
'NULL' pointer kernel panic.

Signed-off-by: Bai Ping <b51503@xxxxxxxxxxxxx>
---
drivers/thermal/imx_thermal.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 4bec1d3..acd1c78 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -487,14 +487,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
if (data->irq < 0)
return data->irq;

- ret = devm_request_threaded_irq(&pdev->dev, data->irq,
- imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
- 0, "imx_thermal", data);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
- return ret;
- }
-
platform_set_drvdata(pdev, data);

ret = imx_get_sensor_data(pdev);
@@ -571,6 +563,17 @@ static int imx_thermal_probe(struct platform_device *pdev)
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);

+ ret = devm_request_threaded_irq(&pdev->dev, data->irq,
+ imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
+ 0, "imx_thermal", data);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
+ clk_disable_unprepare(data->thermal_clk);
+ thermal_zone_device_unregister(data->tz);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
data->irq_enabled = true;
data->mode = THERMAL_DEVICE_ENABLED;

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/