Re: [PATCH v2 1/2] regulator: act8865: support output voltage by VSET2[] bits

From: Ludovic Desroches
Date: Wed Sep 30 2015 - 09:22:20 EST


Hi Wenyou,

I see nothing wrong in it.

On Wed, Sep 30, 2015 at 03:25:49PM +0800, Wenyou Yang wrote:
> For the step-down DC/DC regulators, the output voltage is
> selectable by setting VSEL pin that when VSEL is low, output
> voltage is programmed by VSET1[] bits, and when VSEL is high,
> output voltage is programmed by VSET2[] bits.
>
> The DT property "active-semi,vsel-high" is used to specify
> the VSEL pin at high on the board.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>

Minor comment below, it's only my point of view.

Anyway, Reviewed-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>

> ---
>
> Changes in v2:
> - fix missed argument of macro "ACT88xx_REG" for act8865_alt_regulators
> structure variable.
> - set variable "voltage_select" initial value to avoid compile warning.
>
> drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
> index 896db16..f8d4cd3 100644
> --- a/drivers/regulator/act8865-regulator.c
> +++ b/drivers/regulator/act8865-regulator.c
> @@ -261,6 +261,16 @@ static const struct regulator_desc act8865_regulators[] = {
> ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
> };
>
> +static const struct regulator_desc act8865_alt_regulators[] = {
> + ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
> + ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
> + ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
> + ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
> + ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
> + ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
> + ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
> +};
> +
> #ifdef CONFIG_OF
> static const struct of_device_id act8865_dt_ids[] = {
> { .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
> @@ -413,6 +423,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
> struct act8865 *act8865;
> unsigned long type;
> int off_reg, off_mask;
> + int voltage_select = 0;

I think adding this variable is useless...

>
> pdata = dev_get_platdata(dev);
>
> @@ -424,6 +435,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
> return -ENODEV;
>
> type = (unsigned long) id->data;
> +
> + voltage_select = !!of_get_property(dev->of_node,
> + "active-semi,vsel-high",
> + NULL);
> } else {
> type = i2c_id->driver_data;
> }
> @@ -442,8 +457,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
> off_mask = ACT8846_OFF_SYSMASK;
> break;
> case ACT8865:
> - regulators = act8865_regulators;
> - num_regulators = ARRAY_SIZE(act8865_regulators);
> + if (voltage_select) {

I would directly do

if (of_get_property(dev->of_node, "active-semi,vsel-high", NULL) {

> + regulators = act8865_alt_regulators;
> + num_regulators = ARRAY_SIZE(act8865_alt_regulators);
> + } else {
> + regulators = act8865_regulators;
> + num_regulators = ARRAY_SIZE(act8865_regulators);
> + }
> off_reg = ACT8865_SYS_CTRL;
> off_mask = ACT8865_MSTROFF;
> break;
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/