[PATCH v3 5/5] net: phy: bcm7xxx: Modified to use global core register defines

From: Arun Parameswaran
Date: Tue Oct 06 2015 - 15:25:47 EST


Modified the bcm7xxx phy driver to remove local core register
defines and use the common ones from "include/linux/brcmphy.h"

Signed-off-by: Arun Parameswaran <arunp@xxxxxxxxxxxx>
---
drivers/net/phy/bcm7xxx.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index efa31a6..03d4809 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -25,7 +25,6 @@
#define MII_BCM7XXX_100TX_DISC 0x14
#define MII_BCM7XXX_AUX_MODE 0x1d
#define MII_BCM7XX_64CLK_MDIO BIT(12)
-#define MII_BCM7XXX_CORE_BASE1E 0x1e
#define MII_BCM7XXX_TEST 0x1f
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)

@@ -46,8 +45,6 @@
#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)

-#define CORE_EXPB0 0xb0
-
static void r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
@@ -76,7 +73,7 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);

/* Switch to CORE_BASE1E */
- phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);

r_rc_cal_reset(phydev);

@@ -127,7 +124,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);

/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
- phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);

/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
@@ -155,7 +152,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);

/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
- phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+ phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);

/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
--
2.5.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/