Re: [PATCH v2 2/5] mmc: sdhci-pxav3: enable usage of DAT3 pin as HW card detect

[Marcin Wojtas]

Jisheng,


>>
>> When using DAT3-based detection Armada 38x SDIO IP expects its internal
>> clock to be always on, which had to be ensured twofold:
>
> What happen if runtime suspend disables its core clk and axi clk? I guess
> dat3-based detection isn't compatible with runtime pm. If so, do we also
> need to disable runtime pm in probe function?

Is runtime resume supposed to be triggered by card detection? Is there
a way to manually trigger runtime suspend and resume of sdhci? Anyway
coreclk is not a problem, as it's not used by A38x.

>
>> - Each time controller is reset by updating appropriate registers. On the
>>   occasion of adding new register @0x104, register @0x100 name is modified
>>   in order to the be aligned with Armada 38x documentation.
>> - Leaving the clock enabled despite power-down. For this purpose a new
>>   quirk had to be added to SDHCI subsystem - SDHCI_QUIRK2_KEEP_INT_CLK_ON.
>
> As seen from other mails, Ulf calls for no more quirks...
>

Ok, I'll try to find another solution.

Best regards,
Marcin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/