[PATCH v2 0/2] net, phy, smsc: add posibility to disable energy detect mode

[Heiko Schocher]

On some boards the energy enable detect mode leads in
trouble with some switches, so make the enabling of
this mode configurable through DT.
Therefore the property "smsc,disable-energy-detect" is
introduced.

Patch 1 introduces phy-handle support for the ti,cpsw
driver. This is needed now for the smsc phy.

Patch 2 adds the disable energy mode functionality
to the smsc phy

Changes in v2:
- add comments from Florian Fainelli
  - I did not change disable property name into enable
    because I fear to break existing behaviour
  - add smsc vendor prefix
  - remove CONFIG_OF and use __maybe_unused
  - introduce "phy-handle" ability into ti,cpsw
    driver, so I can remove bogus:
      if (!of_node && dev->parent->of_node)
          of_node = dev->parent->of_node;
    construct. Therefore new patch for the ti,cpsw
    driver is necessary.

Heiko Schocher (2):
  drivers: net: cpsw: add phy-handle parsing
  net: phy: smsc: disable energy detect mode

 Documentation/devicetree/bindings/net/cpsw.txt     |  1 +
 .../devicetree/bindings/net/smsc-lan87xx.txt       | 24 ++++++++++++++++++++++
 drivers/net/ethernet/ti/cpsw.c                     | 15 ++++++++++----
 drivers/net/phy/smsc.c                             | 19 ++++++++++++-----
 4 files changed, 50 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/smsc-lan87xx.txt

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/