Re: [RESEND v4.1 0/5] Mailbox: Provide support STi based platforms

[Jassi Brar]

On 16 October 2015 at 12:51, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> Hi Jassi,
>
> [Resending the updated patch-set this time]
>
> This should be it.  Exciting times!
>
> ST's platforms currently support a maximum of 5 Mailboxes, one for
> each of the supported co-processors situated on the platform.  Each
> Mailbox is divided up into 4 instances which consist of 32 channels.
> Messages are passed between the application and co-processors using
> shared memory areas.
>
> Also included in the set is an example Client which should be generic
> enough to use as a testing environment for all Mailbox IPs which use
> shared memory or the API to pass messages.  With small changes, it
> should also be able to test more extravagant implementations.
>
> v3 -> v4:
>  - More protection in MBOX_BASE() MACRO
>  - Remove unused tx-only marker
>
> v2 => v3:
>  - Controller
>    - Shared (DT <=> Device Driver) defines removed
>    - Return actual error codes instead of NULL in xlate()
>    - Not passing 'direction' configuration via DT anymore
>      - Removed all accompanying configuration checking code
>  - Test F/W
>    - Allow Rx-only and Tx-only controllers to be tested
>    - Cater for controllers requiring pre-Tx 'signal' to be sent
>    - Supply 'wr-' message debugfs file
>      - When written to, will Tx message through Mailbox Framework
>      - When read from, will print out a hexdump of Rx'ed message
>
> v1 => v2:
>  - New MACRO() to obtain base address for a given instance
>  - Move locking into the structure it protects
>  - Stop checking for 'ready' state when sending data
>  - Don't clear channel data (that belongs to the API)
>  - #define register offsets instead of providing via pdata
>  - Register driver with module_platform_driver()
>
> Lee Jones (5):
>   mailbox: dt: Supply bindings for ST's Mailbox IP
>   mailbox: Add support for ST's Mailbox IP
>   ARM: STi: stih407-family: Add nodes for Mailbox
>   mailbox: Add generic mechanism for testing Mailbox Controllers
>   ARM: STi: DT: STiH407: Enable Mailbox testing facility
>
Picked patches 1,2 & 4. Thanks for overhauling the old drivers, now we
have fewer lines and simpler but more complete driver.

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/