Re: [PATCH v2 07/10] hwmon: (fam15h_power) Introduce a cpu accumulated power reporting algorithm

From: Huang Rui
Date: Sun Oct 25 2015 - 23:47:27 EST


On Fri, Oct 23, 2015 at 03:28:02PM +0200, Borislav Petkov wrote:
> On Tue, Oct 20, 2015 at 10:28:26AM +0800, Huang Rui wrote:
> > This patch introduces an algorithm that computes the average power by
> > reading a delta value of “core power accumulator” register during
> > measurement interval, and then dividing delta value by the length of
> > the time interval.
> >
> > User is able to use power1_average entry to measure the processor power
> > consumption and power1_average_interval entry to set the interval.
> >
> > A simple example:
> >
> > ray@hr-ub:~/tip$ sensors
> > fam15h_power-pci-00c4
> > Adapter: PCI adapter
> > power1: 23.73 mW (avg = 634.63 mW, interval = 0.01 s)
> > (crit = 15.00 W)
> >
> > ...
>
> I need to play with this more after I get back from KS. Just a partial
> review for now.
>

Sounds good.

> >
> > The result is current average processor power consumption in 10
> > millisecond. The unit of the result is uWatt.
> >
> > Suggested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> > Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> > Cc: Borislav Petkov <bp@xxxxxxxxx>
> > Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > ---
> > drivers/hwmon/fam15h_power.c | 120 +++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 120 insertions(+)
> >
> > diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
> > index 6321f73..a5a539e 100644
> > --- a/drivers/hwmon/fam15h_power.c
> > +++ b/drivers/hwmon/fam15h_power.c
> > @@ -26,6 +26,9 @@
> > #include <linux/pci.h>
> > #include <linux/bitops.h>
> > #include <linux/cpumask.h>
> > +#include <linux/mutex.h>
> > +#include <linux/time.h>
> > +#include <linux/sched.h>
> > #include <asm/processor.h>
> > #include <asm/msr.h>
> >
> > @@ -64,6 +67,10 @@ struct fam15h_power_data {
> > u64 cu_acc_power[MAX_CUS];
> > /* performance timestamp counter */
> > u64 cpu_sw_pwr_ptsc[MAX_CUS];
> > + /* online/offline status of current compute unit */
> > + int cu_on[MAX_CUS];
> > + unsigned long power_period;
> > + struct mutex acc_pwr_mutex;
> > };
> >
> > static ssize_t show_power(struct device *dev,
> > @@ -132,11 +139,15 @@ static void do_read_registers_on_cu(void *_data)
> > cores_per_cu = amd_get_cores_per_cu();
> > cu = cpu / cores_per_cu;
> >
> > + mutex_lock(&data->acc_pwr_mutex);
> > WARN_ON(rdmsrl_safe(MSR_F15H_CU_PWR_ACCUMULATOR,
> > &data->cu_acc_power[cu]));
> >
> > WARN_ON(rdmsrl_safe(MSR_F15H_PTSC,
> > &data->cpu_sw_pwr_ptsc[cu]));
> > +
> > + data->cu_on[cu] = 1;
> > + mutex_unlock(&data->acc_pwr_mutex);
> > }
> >
> > static int read_registers(struct fam15h_power_data *data)
> > @@ -148,6 +159,10 @@ static int read_registers(struct fam15h_power_data *data)
> > cores_per_cu = amd_get_cores_per_cu();
> > cu_num = boot_cpu_data.x86_max_cores / cores_per_cu;
> >
> > + mutex_lock(&data->acc_pwr_mutex);
> > + memset(data->cu_on, 0, sizeof(int) * MAX_CUS);
> > + mutex_unlock(&data->acc_pwr_mutex);
> > +
> > WARN_ON_ONCE(cu_num > MAX_CUS);
> >
> > ret = zalloc_cpumask_var(&mask, GFP_KERNEL);
> > @@ -184,18 +199,113 @@ static int read_registers(struct fam15h_power_data *data)
> > return 0;
> > }
> >
> > +static ssize_t acc_show_power(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct fam15h_power_data *data = dev_get_drvdata(dev);
> > + u64 prev_cu_acc_power[MAX_CUS], prev_ptsc[MAX_CUS],
> > + jdelta[MAX_CUS];
> > + u64 tdelta, avg_acc;
> > + int cu, cu_num, cores_per_cu, ret;
> > + signed long leftover;
> > +
> > + cores_per_cu = amd_get_cores_per_cu();
> > + cu_num = boot_cpu_data.x86_max_cores / cores_per_cu;
> > +
> > + ret = read_registers(data);
> > + if (ret)
> > + return 0;
> > +
> > + cu = 0;
> > + while(cu++ < cu_num) {
> > + prev_cu_acc_power[cu] = data->cu_acc_power[cu];
> > + prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu];
> > + }
>
> Please integrate checkpatch into your workflow of creating patches - it
> can be correct sometimes:
>
> ERROR: space required before the open parenthesis '('
> #130: FILE: drivers/hwmon/fam15h_power.c:221:
> + while(cu++ < cu_num) {
>

Oh, I will take care next time.

>
> > +
> > + leftover = schedule_timeout_interruptible(
> > + msecs_to_jiffies(data->power_period)
> > + );
>
> This way of writing a function call is reaaally ugly. What's wrong with:
>
> leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period));
>
> ?
>
> And don't tell me 80 columns - that rule is not a hard one.
>

Actually, yes. I found it too long, so... :)
OK, I will fix it on V3.


Thanks,
Rui
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/