Re: [PATCH V2 1/6] dmaengine: tegra-apb: Correct runtime-pm usage

[Andy Shevchenko]

On Mon, Nov 9, 2015 at 3:23 PM, Jon Hunter <jonathanh@xxxxxxxxxx> wrote:
> The tegra-apb DMA driver enables runtime-pm but never calls
> pm_runtime_get/put and hence the runtime-pm callbacks are never invoked.
> The driver manages the clocks by directly calling clk_prepare_enable()
> and clk_unprepare_disable().
>
> Fix this by replacing the clk_prepare_enable() and clk_disable_unprepare()
> with pm_runtime_get_sync() and pm_runtime_put(), respectively. Note that
> the consequence of this is that if runtime-pm is disabled, then the clocks
> will remain on the entire time the driver is loaded. However, if
> runtime-pm is disabled, then power is not most likely not a concern.

Nitpick

> @@ -1539,11 +1534,10 @@ static int tegra_dma_runtime_resume(struct device *dev)
>  static int tegra_dma_pm_suspend(struct device *dev)
>  {
>         struct tegra_dma *tdma = dev_get_drvdata(dev);
> -       int i;
> -       int ret;
> +       int i, ret;

>  static int tegra_dma_pm_resume(struct device *dev)
>  {
>         struct tegra_dma *tdma = dev_get_drvdata(dev);
> -       int i;
> -       int ret;
> +       int i, ret;

Do you really need that?

-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/