Re: [PATCH v3] usb: chipidea: removing of_find_property

From: Saurabh Sengar
Date: Tue Nov 17 2015 - 23:00:45 EST


Hi Peter,

Yes itc_setting is still optional, in case dts does not pass this
property, return type will be -EINVAL and there would be no problem.
The function will break only if there is 'No data'(-ENODATA) or
'overflow'(-ENODATA) error for this property.
In case this is not OK, I will send a another patch(v4) as you have suggested.

Regards,
Saurabh

On 18 November 2015 at 09:08, Peter Chen <peter.chen@xxxxxxxxxxxxx> wrote:
> On Tue, Nov 17, 2015 at 05:22:26PM +0530, Saurabh Sengar wrote:
>> call to of_find_property() before of_property_read_u32() is unnecessary.
>> of_property_read_u32() anyway calls to of_find_property() only.
>>
>> Signed-off-by: Saurabh Sengar <saurabh.truth@xxxxxxxxx>
>> ---
>> v2 : removed pval variable
>> v3 : removed unnecessary if condition
>> drivers/usb/chipidea/core.c | 59 +++++++++++++++++++--------------------------
>> 1 file changed, 25 insertions(+), 34 deletions(-)
>>
>> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
>> index 965d0e2..960a925 100644
>> --- a/drivers/usb/chipidea/core.c
>> +++ b/drivers/usb/chipidea/core.c
>> @@ -688,52 +688,43 @@ static int ci_get_platdata(struct device *dev,
>> if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
>> platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
>>
>> - if (of_find_property(dev->of_node, "phy-clkgate-delay-us", NULL))
>> - of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
>> + of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
>> &platdata->phy_clkgate_delay_us);
>>
>> platdata->itc_setting = 1;
>> - if (of_find_property(dev->of_node, "itc-setting", NULL)) {
>> - ret = of_property_read_u32(dev->of_node, "itc-setting",
>> - &platdata->itc_setting);
>> - if (ret) {
>> - dev_err(dev,
>> - "failed to get itc-setting\n");
>> - return ret;
>> - }
>> +
>> + ret = of_property_read_u32(dev->of_node, "itc-setting",
>> + &platdata->itc_setting);
>> + if (ret && ret != -EINVAL) {
>> + dev_err(dev, "failed to get itc-setting\n");
>> + return ret;
>> }
>
> For this one, you may not need to check return value, since
> platdata->itc_setting is optional, and doesn't need to set
> any flags if platdata->itc_setting is valid.
>
> Other changes are ok for me.
>
> Peter
>
>>
>> - if (of_find_property(dev->of_node, "ahb-burst-config", NULL)) {
>> - ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
>> - &platdata->ahb_burst_config);
>> - if (ret) {
>> - dev_err(dev,
>> - "failed to get ahb-burst-config\n");
>> - return ret;
>> - }
>> + ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
>> + &platdata->ahb_burst_config);
>> + if (!ret) {
>> platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
>> + } else if (ret != -EINVAL) {
>> + dev_err(dev, "failed to get ahb-burst-config\n");
>> + return ret;
>> }
>>
>> - if (of_find_property(dev->of_node, "tx-burst-size-dword", NULL)) {
>> - ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
>> - &platdata->tx_burst_size);
>> - if (ret) {
>> - dev_err(dev,
>> - "failed to get tx-burst-size-dword\n");
>> - return ret;
>> - }
>> + ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
>> + &platdata->tx_burst_size);
>> + if (!ret) {
>> platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
>> + } else if (ret != -EINVAL) {
>> + dev_err(dev, "failed to get tx-burst-size-dword\n");
>> + return ret;
>> }
>>
>> - if (of_find_property(dev->of_node, "rx-burst-size-dword", NULL)) {
>> - ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
>> - &platdata->rx_burst_size);
>> - if (ret) {
>> - dev_err(dev,
>> - "failed to get rx-burst-size-dword\n");
>> - return ret;
>> - }
>> + ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
>> + &platdata->rx_burst_size);
>> + if (!ret) {
>> platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
>> + } else if (ret != -EINVAL) {
>> + dev_err(dev, "failed to get rx-burst-size-dword\n");
>> + return ret;
>> }
>>
>> ext_id = ERR_PTR(-ENODEV);
>> --
>> 1.9.1
>>
>
> --
>
> Best Regards,
> Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/