[PATCH 0/4] drm/fsl-dcu: add TCON and Vybrid support

From: Stefan Agner
Date: Fri Dec 18 2015 - 02:42:47 EST


This patchset adds the missing pieces to make the Freescale
DCU DRM driver work on Freescale Vybrid.

Foremost, it adds support for the timing controller (TCON)
module. The module is between the Display Controller and the
actual output pins. It allows to alter the timings for RAW
TFT displays, but can also operate in a bypass mode. This
change has only support for the bypass mode.

Earlier variants of the DCU DRM driver configured the TCON
module in bypass mode, however this has been removed and
postponed. The last variant with the TCON code was v9:
https://lkml.org/lkml/2015/7/13/242

This change is an attempt to implement a proper driver.
Ideas have been taken from the sun4i Tcon driver:
https://lkml.org/lkml/2015/10/30/369

The patchset depends on my fsl-dcu fixes patchset:
https://lkml.org/lkml/2015/11/18/953

Stefan Agner (4):
ARM: dts: vf610: add display nodes
ARM: dts: vf610-colibri: enable display controller
ARM: clk: vf610: add TCON ipg clock
drm/fsl-dcu: add TCON driver

.../devicetree/bindings/display/fsl,dcu.txt | 4 +
.../devicetree/bindings/display/fsl,tcon.txt | 18 +++
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 16 +++
arch/arm/boot/dts/vf-colibri.dtsi | 33 +++++
arch/arm/boot/dts/vfxxx.dtsi | 18 +++
drivers/clk/imx/clk-vf610.c | 3 +
drivers/gpu/drm/fsl-dcu/Makefile | 3 +-
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 6 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 1 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 11 ++
drivers/gpu/drm/fsl-dcu/fsl_tcon.c | 134 +++++++++++++++++++++
drivers/gpu/drm/fsl-dcu/fsl_tcon.h | 37 ++++++
include/dt-bindings/clock/vf610-clock.h | 4 +-
13 files changed, 286 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/fsl,tcon.txt
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.c
create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_tcon.h

--
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/