[PATCH 06/13] staging: fbtft: Use standard MIPI DCS command defines for ili9341

[Priit Laes]

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
---
 drivers/staging/fbtft/fb_ili9341.c | 50 +++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ili9341.c b/drivers/staging/fbtft/fb_ili9341.c
index dcee0af..d1e13cd 100644
--- a/drivers/staging/fbtft/fb_ili9341.c
+++ b/drivers/staging/fbtft/fb_ili9341.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -39,9 +40,9 @@ static int init_display(struct fbtft_par *par)
 	par->fbtftops.reset(par);
 
 	/* startup sequence for MI0283QT-9A */
-	write_reg(par, 0x01); /* software reset */
+	write_reg(par, MIPI_DCS_SOFT_RESET);
 	mdelay(5);
-	write_reg(par, 0x28); /* display off */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_OFF);
 	/* --------------------------------------------------------- */
 	write_reg(par, 0xCF, 0x00, 0x83, 0x30);
 	write_reg(par, 0xED, 0x64, 0x03, 0x12, 0x81);
@@ -56,18 +57,18 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0xC5, 0x35, 0x3E);
 	write_reg(par, 0xC7, 0xBE);
 	/* ------------memory access control------------------------ */
-	write_reg(par, 0x3A, 0x55); /* 16bit pixel */
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); /* 16bit pixel */
 	/* ------------frame rate----------------------------------- */
 	write_reg(par, 0xB1, 0x00, 0x1B);
 	/* ------------Gamma---------------------------------------- */
 	/* write_reg(par, 0xF2, 0x08); */ /* Gamma Function Disable */
-	write_reg(par, 0x26, 0x01);
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 	/* ------------display-------------------------------------- */
 	write_reg(par, 0xB7, 0x07); /* entry mode set */
 	write_reg(par, 0xB6, 0x0A, 0x82, 0x27, 0x00);
-	write_reg(par, 0x11); /* sleep out */
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	mdelay(100);
-	write_reg(par, 0x29); /* display on */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	mdelay(20);
 
 	return 0;
@@ -75,40 +76,39 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address set */
-	write_reg(par, 0x2A,
-		(xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
 
-	/* Row address set */
-	write_reg(par, 0x2B,
-		(ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
-#define MEM_Y   (7) /* MY row address order */
-#define MEM_X   (6) /* MX column address order */
-#define MEM_V   (5) /* MV row / column exchange */
-#define MEM_L   (4) /* ML vertical refresh order */
-#define MEM_H   (2) /* MH horizontal refresh order */
+#define MEM_Y   BIT(7) /* MY row address order */
+#define MEM_X   BIT(6) /* MX column address order */
+#define MEM_V   BIT(5) /* MV row / column exchange */
+#define MEM_L   BIT(4) /* ML vertical refresh order */
+#define MEM_H   BIT(2) /* MH horizontal refresh order */
 #define MEM_BGR (3) /* RGB-BGR Order */
 static int set_var(struct fbtft_par *par)
 {
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, (1 << MEM_X) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_X | (par->bgr << MEM_BGR));
 		break;
 	case 270:
-		write_reg(par, 0x36,
-			(1 << MEM_V) | (1 << MEM_L) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_V | MEM_L | (par->bgr << MEM_BGR));
 		break;
 	case 180:
-		write_reg(par, 0x36, (1 << MEM_Y) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_Y | (par->bgr << MEM_BGR));
 		break;
 	case 90:
-		write_reg(par, 0x36, (1 << MEM_Y) | (1 << MEM_X) |
-				     (1 << MEM_V) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_Y | MEM_X | MEM_V | (par->bgr << MEM_BGR));
 		break;
 	}
 
-- 
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/