[RFC LINUX PATCH] dt: xilinx: xadc: provision to control clock frequency

From: Ranjit Waghmode
Date: Wed Dec 23 2015 - 05:28:42 EST


This patch adds parameter to the xilinx-xadc node for controlling
clock frequency.

Following are the possible options for user to control the frequency:
* 00 : 1/2 of clock frequency
* 01 : 1/4 of clock frequency
* 10 : 1/8 of clock frequency
* 11 : 1/16 of clock frequency

So this patch adds parameter tck-rate to set user defined values from
above pool to control the clock frequency.

Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
---
Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d71258e..2cabb9b 100644
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -20,6 +20,11 @@ Required properties:
- clocks: When using the ZYNQ this must be the ZYNQ PCAP clock,
when using the AXI-XADC pcore this must be the clock that provides the
clock to the AXI bus interface of the core.
+ - tck-rate: clock frequency control
+ * 0x0: 1/2 of clock frequency
+ * 0x1: 1/4 of clock frequency
+ * 0x2: 1/8 of clock frequency
+ * 0x3: 1/16 of clock frequency

Optional properties:
- interrupt-parent: phandle to the parent interrupt controller
@@ -79,6 +84,7 @@ Examples:
interrupts = <0 7 4>;
interrupt-parent = <&gic>;
clocks = <&pcap_clk>;
+ tck-rate = <0x3>;

xlnx,channels {
#address-cells = <1>;
@@ -101,6 +107,7 @@ Examples:
interrupts = <0 53 4>;
interrupt-parent = <&gic>;
clocks = <&fpga1_clk>;
+ tck-rate = <0x3>;

xlnx,channels {
#address-cells = <1>;
--
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/