Re: Nokia N900 - audio TPA6130A2 problems

[Pali RohÃr]

On Tuesday 04 August 2015 09:02:39 Peter Ujfalusi wrote:
> On 08/03/2015 09:48 PM, Jarkko Nikula wrote:
> > It is well possible that some regression got introduced to
> > TPA6130A2 I2C communication over the years without nobody than you
> > now notices. We used to do QA back in Meego N900 days but that was
> > pre 3.x kernels.
> 
> No major changes has been done to the tpa driver during the past
> years... I wanted to do some updates, like moving it to regmap, but
> as you said, n900 is the only user (and n9) and I do not feel
> comfortable to hack on a device where I do not have serial
> console... And I'm using the n900 time to time also.
> 
> >> So maybe something similar? Kernel expects that some PM or
> >> regulator parts are initialized, but they are only sometimes?
> >> Just speculation...
> > 
> > I'm thinking the same. I could figure SCL could be stuck low if TPA
> > or some other chip connected to the same I2C bus is without power
> > and is pulling I2C signals down.
> 
> What would happen with the SCL stuck on i2c.2 bus if you remove the
> tpa driver from the kernel? If you remove the other drivers for the
> devices on i2c.2?

Hi Peter and Jarkko! Do you have some code samples for testing? Or 
something else which I can test? This problem is still reproducible on 
more N900 devices and I would like to see it fixed.

-- 
Pali RohÃr
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: This is a digitally signed message part.