[PATCH] pinctrl: qcom: spmi-mpp: Skip pullup on ULT type MPPs

From: Stephen Boyd
Date: Fri Jan 08 2016 - 15:26:00 EST


The ULT type of MPPs don't have a pullup. Skip configuring the
pullup on these types of pins.

Cc: Andy Gross <andy.gross@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 2f18323571a6..2a3e5490a483 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -117,6 +117,7 @@
* @output_enabled: Set to true if MPP output logic is enabled.
* @input_enabled: Set to true if MPP input buffer logic is enabled.
* @paired: Pin operates in paired mode
+ * @has_pullup: Pin has support to configure pullup
* @num_sources: Number of power-sources supported by this MPP.
* @power_source: Current power-source used.
* @amux_input: Set the source for analog input.
@@ -134,6 +135,7 @@ struct pmic_mpp_pad {
bool output_enabled;
bool input_enabled;
bool paired;
+ bool has_pullup;
unsigned int num_sources;
unsigned int power_source;
unsigned int amux_input;
@@ -477,11 +479,14 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (ret < 0)
return ret;

- val = pad->pullup << PMIC_MPP_REG_PULL_SHIFT;
+ if (pad->has_pullup) {
+ val = pad->pullup << PMIC_MPP_REG_PULL_SHIFT;

- ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_DIG_PULL_CTL, val);
- if (ret < 0)
- return ret;
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_DIG_PULL_CTL,
+ val);
+ if (ret < 0)
+ return ret;
+ }

val = pad->amux_input & PMIC_MPP_REG_AIN_ROUTE_MASK;

@@ -534,7 +539,8 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
seq_printf(s, " %-7s", pmic_mpp_functions[pad->function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %d", pad->aout_level);
- seq_printf(s, " %-8s", biases[pad->pullup]);
+ if (pad->has_pullup)
+ seq_printf(s, " %-8s", biases[pad->pullup]);
seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
if (pad->dtest)
seq_printf(s, " dtest%d", pad->dtest);
@@ -748,12 +754,16 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
pad->power_source = val >> PMIC_MPP_REG_VIN_SHIFT;
pad->power_source &= PMIC_MPP_REG_VIN_MASK;

- val = pmic_mpp_read(state, pad, PMIC_MPP_REG_DIG_PULL_CTL);
- if (val < 0)
- return val;
+ if (subtype != PMIC_MPP_SUBTYPE_ULT_4CH_NO_ANA_OUT &&
+ subtype != PMIC_MPP_SUBTYPE_ULT_4CH_NO_SINK) {
+ val = pmic_mpp_read(state, pad, PMIC_MPP_REG_DIG_PULL_CTL);
+ if (val < 0)
+ return val;

- pad->pullup = val >> PMIC_MPP_REG_PULL_SHIFT;
- pad->pullup &= PMIC_MPP_REG_PULL_MASK;
+ pad->pullup = val >> PMIC_MPP_REG_PULL_SHIFT;
+ pad->pullup &= PMIC_MPP_REG_PULL_MASK;
+ pad->has_pullup = true;
+ }

val = pmic_mpp_read(state, pad, PMIC_MPP_REG_AIN_CTL);
if (val < 0)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project