Re: [PATCH v3] PCI: hosts: mark pcie/pci (msi) irq cascade handler as IRQF_NO_THREAD

[Sebastian Andrzej Siewior]

* Bjorn Helgaas | 2016-01-06 16:18:27 [-0600]:

>Hi Bjorn,

>> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
>> index 8c36880..0415192 100644
>> --- a/drivers/pci/host/pci-dra7xx.c
>> +++ b/drivers/pci/host/pci-dra7xx.c
>> @@ -301,8 +301,19 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
>>  		return -EINVAL;
>>  	}
>>  
>> +	/*
>> +	 * Mark dra7xx_pcie_msi IRQ as IRQF_NO_THREAD
>> +	 * On -RT and if kernel is booting with "threadirqs" cmd line parameter
>> +	 * the dra7xx_pcie_msi_irq_handler() will be forced threaded but,
>> +	 * in the same time, it's IRQ dispatcher and calls generic_handle_irq(),
>> +	 * which, in turn, will be resolved to handle_simple_irq() call.
>> +	 * The handle_simple_irq() expected to be called with IRQ disabled, as
>> +	 * result kernle will display warning:
>> +	 * "irq XXX handler YYY+0x0/0x14 enabled interrupts".
>> +	 */

could you _please_ remove this coment? This kind of comment (if at all)
should be part of the commit message (which is the case more or less).

>>  	ret = devm_request_irq(&pdev->dev, pp->irq,
>> -			       dra7xx_pcie_msi_irq_handler, IRQF_SHARED,
>> +			       dra7xx_pcie_msi_irq_handler,
>> +			       IRQF_SHARED | IRQF_NO_THREAD,
>>  			       "dra7-pcie-msi",	pp);
>>  	if (ret) {
>>  		dev_err(&pdev->dev, "failed to request irq\n");
>> diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/host/pci-exynos.c

Sebastian