Re: [PATCH] Staging: ste_rmi4: Remove obsolete driver
From: Andrew Duggan
Date: Thu Jan 14 2016 - 19:11:08 EST
Hi Shraddha,
On Sat, Dec 26, 2015 at 7:23 AM, <shraddha.6596@xxxxxxxxx> wrote:
> From: Shraddha Barke <shraddha.6596@xxxxxxxxx>
>
> Remove support for Synaptics RMI4 Touchscreen driver from the staging
> directory since support for Synaptics RMI4 touchpads has been added
> in the mainline kernel.
> commit 9fb6bf02e3ad ("HID: rmi: introduce RMI driver for Synaptics touchpads")
>
The driver in the commit you referenced only supports HID RMI4
devices. While the ste_rmi4 driver only supports touchscreens which
are connected with I2C directly. Currently, their is not a driver in
the mainline kernel which supports RMI / I2C devices. However, I did
just post a v2 for a patch series which would add support for RMI4
several different protocols I2C, HID, SPI, and potentially others.
Hopefully, there will soon be a mainline replacement for this driver.
But, I just wanted to point out that currently there is not.
Andrew
> Signed-off-by: Shraddha Barke <shraddha.6596@xxxxxxxxx>
> ---
> drivers/staging/Kconfig | 2 -
> drivers/staging/Makefile | 1 -
> drivers/staging/ste_rmi4/Kconfig | 9 -
> drivers/staging/ste_rmi4/Makefile | 4 -
> drivers/staging/ste_rmi4/TODO | 7 -
> drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 1140 -------------------------
> drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h | 46 -
> 7 files changed, 1209 deletions(-)
> delete mode 100644 drivers/staging/ste_rmi4/Kconfig
> delete mode 100644 drivers/staging/ste_rmi4/Makefile
> delete mode 100644 drivers/staging/ste_rmi4/TODO
> delete mode 100644 drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> delete mode 100644 drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h
>
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index 5d3b86a..e89c02c 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -64,8 +64,6 @@ source "drivers/staging/emxx_udc/Kconfig"
>
> source "drivers/staging/speakup/Kconfig"
>
> -source "drivers/staging/ste_rmi4/Kconfig"
> -
> source "drivers/staging/nvec/Kconfig"
>
> source "drivers/staging/media/Kconfig"
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index 30918ed..654ee8d 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -26,7 +26,6 @@ obj-$(CONFIG_FB_SM750) += sm750fb/
> obj-$(CONFIG_FB_XGI) += xgifb/
> obj-$(CONFIG_USB_EMXX) += emxx_udc/
> obj-$(CONFIG_SPEAKUP) += speakup/
> -obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/
> obj-$(CONFIG_MFD_NVEC) += nvec/
> obj-$(CONFIG_STAGING_RDMA) += rdma/
> obj-$(CONFIG_ANDROID) += android/
> diff --git a/drivers/staging/ste_rmi4/Kconfig b/drivers/staging/ste_rmi4/Kconfig
> deleted file mode 100644
> index e867950..0000000
> --- a/drivers/staging/ste_rmi4/Kconfig
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -config TOUCHSCREEN_SYNAPTICS_I2C_RMI4
> - tristate "Synaptics i2c rmi4 touchscreen"
> - depends on I2C && INPUT
> - help
> - Say Y here if you have a Synaptics RMI4 and
> - want to enable support for the built-in touchscreen.
> -
> - To compile this driver as a module, choose M here: the
> - module will be called synaptics_rmi4_ts.
> diff --git a/drivers/staging/ste_rmi4/Makefile b/drivers/staging/ste_rmi4/Makefile
> deleted file mode 100644
> index 6cce2ed..0000000
> --- a/drivers/staging/ste_rmi4/Makefile
> +++ /dev/null
> @@ -1,4 +0,0 @@
> -#
> -# Makefile for the RMI4 touchscreen driver.
> -#
> -obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
> diff --git a/drivers/staging/ste_rmi4/TODO b/drivers/staging/ste_rmi4/TODO
> deleted file mode 100644
> index 9be2437..0000000
> --- a/drivers/staging/ste_rmi4/TODO
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -TODO
> -----
> -
> -Wait for the official upstream synaptics rmi4 clearpad drivers as promised over the past few months
> -Merge any device support needed from this driver into it
> -Delete this driver
> -
> diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> deleted file mode 100644
> index 824d460..0000000
> --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> +++ /dev/null
> @@ -1,1140 +0,0 @@
> -/**
> - *
> - * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
> - * Copyright (c) 2007-2010, Synaptics Incorporated
> - *
> - * Author: Js HA <js.ha@xxxxxxxxxxxxxx> for ST-Ericsson
> - * Author: Naveen Kumar G <naveen.gaddipati@xxxxxxxxxxxxxx> for ST-Ericsson
> - * Copyright 2010 (c) ST-Ericsson AB
> - */
> -/*
> - * This file is licensed under the GPL2 license.
> - *
> - *#############################################################################
> - * GPL
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published
> - * by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> - * for more details.
> - *
> - *#############################################################################
> - */
> -
> -#include <linux/input.h>
> -#include <linux/slab.h>
> -#include <linux/i2c.h>
> -#include <linux/interrupt.h>
> -#include <linux/regulator/consumer.h>
> -#include <linux/module.h>
> -#include <linux/input/mt.h>
> -#include "synaptics_i2c_rmi4.h"
> -
> -/* TODO: for multiple device support will need a per-device mutex */
> -#define DRIVER_NAME "synaptics_rmi4_i2c"
> -
> -#define MAX_ERROR_REPORT 6
> -#define MAX_TOUCH_MAJOR 15
> -#define MAX_RETRY_COUNT 5
> -#define STD_QUERY_LEN 21
> -#define PAGE_LEN 2
> -#define DATA_BUF_LEN 32
> -#define BUF_LEN 37
> -#define QUERY_LEN 9
> -#define DATA_LEN 12
> -#define HAS_TAP 0x01
> -#define HAS_PALMDETECT 0x01
> -#define HAS_ROTATE 0x02
> -#define HAS_TAPANDHOLD 0x02
> -#define HAS_DOUBLETAP 0x04
> -#define HAS_EARLYTAP 0x08
> -#define HAS_RELEASE 0x08
> -#define HAS_FLICK 0x10
> -#define HAS_PRESS 0x20
> -#define HAS_PINCH 0x40
> -
> -#define MASK_16BIT 0xFFFF
> -#define MASK_8BIT 0xFF
> -#define MASK_7BIT 0x7F
> -#define MASK_5BIT 0x1F
> -#define MASK_4BIT 0x0F
> -#define MASK_3BIT 0x07
> -#define MASK_2BIT 0x03
> -#define TOUCHPAD_CTRL_INTR 0x8
> -#define PDT_START_SCAN_LOCATION (0x00E9)
> -#define PDT_END_SCAN_LOCATION (0x000A)
> -#define PDT_ENTRY_SIZE (0x0006)
> -#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
> -#define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
> -
> -/**
> - * struct synaptics_rmi4_fn_desc - contains the function descriptor information
> - * @query_base_addr: base address for query
> - * @cmd_base_addr: base address for command
> - * @ctrl_base_addr: base address for control
> - * @data_base_addr: base address for data
> - * @intr_src_count: count for the interrupt source
> - * @fn_number: function number
> - *
> - * This structure is used to gives the function descriptor information
> - * of the particular functionality.
> - */
> -struct synaptics_rmi4_fn_desc {
> - unsigned char query_base_addr;
> - unsigned char cmd_base_addr;
> - unsigned char ctrl_base_addr;
> - unsigned char data_base_addr;
> - unsigned char intr_src_count;
> - unsigned char fn_number;
> -};
> -
> -/**
> - * struct synaptics_rmi4_fn - contains the function information
> - * @fn_number: function number
> - * @num_of_data_sources: number of data sources
> - * @num_of_data_points: number of fingers touched
> - * @size_of_data_register_block: data register block size
> - * @index_to_intr_reg: index for interrupt register
> - * @intr_mask: interrupt mask value
> - * @fn_desc: variable for function descriptor structure
> - * @link: linked list for function descriptors
> - *
> - * This structure gives information about the number of data sources and
> - * the number of data registers associated with the function.
> - */
> -struct synaptics_rmi4_fn {
> - unsigned char fn_number;
> - unsigned char num_of_data_sources;
> - unsigned char num_of_data_points;
> - unsigned char size_of_data_register_block;
> - unsigned char index_to_intr_reg;
> - unsigned char intr_mask;
> - struct synaptics_rmi4_fn_desc fn_desc;
> - struct list_head link;
> -};
> -
> -/**
> - * struct synaptics_rmi4_device_info - contains the rmi4 device information
> - * @version_major: protocol major version number
> - * @version_minor: protocol minor version number
> - * @manufacturer_id: manufacturer identification byte
> - * @product_props: product properties information
> - * @product_info: product info array
> - * @date_code: device manufacture date
> - * @tester_id: tester id array
> - * @serial_number: serial number for that device
> - * @product_id_string: product id for the device
> - * @support_fn_list: linked list for device information
> - *
> - * This structure gives information about the number of data sources and
> - * the number of data registers associated with the function.
> - */
> -struct synaptics_rmi4_device_info {
> - unsigned int version_major;
> - unsigned int version_minor;
> - unsigned char manufacturer_id;
> - unsigned char product_props;
> - unsigned char product_info[2];
> - unsigned char date_code[3];
> - unsigned short tester_id;
> - unsigned short serial_number;
> - unsigned char product_id_string[11];
> - struct list_head support_fn_list;
> -};
> -
> -/**
> - * struct synaptics_rmi4_data - contains the rmi4 device data
> - * @rmi4_mod_info: structure variable for rmi4 device info
> - * @input_dev: pointer for input device
> - * @i2c_client: pointer for i2c client
> - * @board: constant pointer for touch platform data
> - * @fn_list_mutex: mutex for function list
> - * @rmi4_page_mutex: mutex for rmi4 page
> - * @current_page: variable for integer
> - * @number_of_interrupt_register: interrupt registers count
> - * @fn01_ctrl_base_addr: control base address for fn01
> - * @fn01_query_base_addr: query base address for fn01
> - * @fn01_data_base_addr: data base address for fn01
> - * @sensor_max_x: sensor maximum x value
> - * @sensor_max_y: sensor maximum y value
> - * @regulator: pointer to the regulator structure
> - * @wait: wait queue structure variable
> - * @touch_stopped: flag to stop the thread function
> - * @fingers_supported: maximum supported fingers
> - *
> - * This structure gives the device data information.
> - */
> -struct synaptics_rmi4_data {
> - struct synaptics_rmi4_device_info rmi4_mod_info;
> - struct input_dev *input_dev;
> - struct i2c_client *i2c_client;
> - const struct synaptics_rmi4_platform_data *board;
> - struct mutex fn_list_mutex;
> - struct mutex rmi4_page_mutex;
> - int current_page;
> - unsigned int number_of_interrupt_register;
> - unsigned short fn01_ctrl_base_addr;
> - unsigned short fn01_query_base_addr;
> - unsigned short fn01_data_base_addr;
> - int sensor_max_x;
> - int sensor_max_y;
> - struct regulator *regulator;
> - wait_queue_head_t wait;
> - bool touch_stopped;
> - unsigned char fingers_supported;
> -};
> -
> -/**
> - * synaptics_rmi4_set_page() - sets the page
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @address: set the address of the page
> - *
> - * This function is used to set the page and returns integer.
> - */
> -static int synaptics_rmi4_set_page(struct synaptics_rmi4_data *pdata,
> - unsigned int address)
> -{
> - unsigned char txbuf[PAGE_LEN];
> - int retval;
> - unsigned int page;
> - struct i2c_client *i2c = pdata->i2c_client;
> -
> - page = ((address >> 8) & MASK_8BIT);
> - if (page != pdata->current_page) {
> - txbuf[0] = MASK_8BIT;
> - txbuf[1] = page;
> - retval = i2c_master_send(i2c, txbuf, PAGE_LEN);
> - if (retval != PAGE_LEN)
> - dev_err(&i2c->dev, "failed:%d\n", retval);
> - else
> - pdata->current_page = page;
> - } else
> - retval = PAGE_LEN;
> - return retval;
> -}
> -/**
> - * synaptics_rmi4_i2c_block_read() - read the block of data
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @address: read the block of data from this offset
> - * @valp: pointer to a buffer containing the data to be read
> - * @size: number of bytes to read
> - *
> - * This function is to read the block of data and returns integer.
> - */
> -static int synaptics_rmi4_i2c_block_read(struct synaptics_rmi4_data *pdata,
> - unsigned short address,
> - unsigned char *valp, int size)
> -{
> - int retval = 0;
> - int retry_count = 0;
> - int index;
> - struct i2c_client *i2c = pdata->i2c_client;
> -
> - mutex_lock(&(pdata->rmi4_page_mutex));
> - retval = synaptics_rmi4_set_page(pdata, address);
> - if (retval != PAGE_LEN)
> - goto exit;
> - index = address & MASK_8BIT;
> -retry:
> - retval = i2c_smbus_read_i2c_block_data(i2c, index, size, valp);
> - if (retval != size) {
> - if (++retry_count == MAX_RETRY_COUNT)
> - dev_err(&i2c->dev,
> - "%s:address 0x%04x size %d failed:%d\n",
> - __func__, address, size, retval);
> - else {
> - synaptics_rmi4_set_page(pdata, address);
> - goto retry;
> - }
> - }
> -exit:
> - mutex_unlock(&(pdata->rmi4_page_mutex));
> - return retval;
> -}
> -
> -/**
> - * synaptics_rmi4_i2c_byte_write() - write the single byte data
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @address: write the block of data from this offset
> - * @data: data to be write
> - *
> - * This function is to write the single byte data and returns integer.
> - */
> -static int synaptics_rmi4_i2c_byte_write(struct synaptics_rmi4_data *pdata,
> - unsigned short address,
> - unsigned char data)
> -{
> - unsigned char txbuf[2];
> - int retval = 0;
> - struct i2c_client *i2c = pdata->i2c_client;
> -
> - /* Can't have anyone else changing the page behind our backs */
> - mutex_lock(&(pdata->rmi4_page_mutex));
> -
> - retval = synaptics_rmi4_set_page(pdata, address);
> - if (retval != PAGE_LEN)
> - goto exit;
> - txbuf[0] = address & MASK_8BIT;
> - txbuf[1] = data;
> - retval = i2c_master_send(pdata->i2c_client, txbuf, 2);
> - /* Add in retry on writes only in certain error return values */
> - if (retval != 2) {
> - dev_err(&i2c->dev, "failed:%d\n", retval);
> - retval = -EIO;
> - } else
> - retval = 1;
> -exit:
> - mutex_unlock(&(pdata->rmi4_page_mutex));
> - return retval;
> -}
> -
> -/**
> - * synpatics_rmi4_touchpad_report() - reports for the rmi4 touchpad device
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @rfi: pointer to synaptics_rmi4_fn structure
> - *
> - * This function calls to reports for the rmi4 touchpad device
> - */
> -static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> - struct synaptics_rmi4_fn *rfi)
> -{
> - /* number of touch points - fingers down in this case */
> - int touch_count = 0;
> - int finger;
> - int finger_registers;
> - int reg;
> - int finger_shift;
> - int finger_status;
> - int retval;
> - int x, y;
> - int wx, wy;
> - unsigned short data_base_addr;
> - unsigned short data_offset;
> - unsigned char data_reg_blk_size;
> - unsigned char values[2];
> - unsigned char data[DATA_LEN];
> - unsigned char fingers_supported = pdata->fingers_supported;
> - struct i2c_client *client = pdata->i2c_client;
> - struct input_dev *input_dev = pdata->input_dev;
> -
> - /* get 2D sensor finger data */
> - /*
> - * First get the finger status field - the size of the finger status
> - * field is determined by the number of finger supporte - 2 bits per
> - * finger, so the number of registers to read is:
> - * registerCount = ceil(numberOfFingers/4).
> - * Read the required number of registers and check each 2 bit field to
> - * determine if a finger is down:
> - * 00 = finger not present,
> - * 01 = finger present and data accurate,
> - * 10 = finger present but data may not be accurate,
> - * 11 = reserved for product use.
> - */
> - finger_registers = (fingers_supported + 3)/4;
> - data_base_addr = rfi->fn_desc.data_base_addr;
> - retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
> - finger_registers);
> - if (retval != finger_registers) {
> - dev_err(&client->dev, "%s:read status registers failed\n",
> - __func__);
> - return 0;
> - }
> - /*
> - * For each finger present, read the proper number of registers
> - * to get absolute data.
> - */
> - data_reg_blk_size = rfi->size_of_data_register_block;
> - for (finger = 0; finger < fingers_supported; finger++) {
> - /* determine which data byte the finger status is in */
> - reg = finger/4;
> - /* bit shift to get finger's status */
> - finger_shift = (finger % 4) * 2;
> - finger_status = (values[reg] >> finger_shift) & 3;
> - /*
> - * if finger status indicates a finger is present then
> - * read the finger data and report it
> - */
> - input_mt_slot(input_dev, finger);
> - input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
> - finger_status != 0);
> -
> - if (finger_status) {
> - /* Read the finger data */
> - data_offset = data_base_addr +
> - ((finger * data_reg_blk_size) +
> - finger_registers);
> - retval = synaptics_rmi4_i2c_block_read(pdata,
> - data_offset, data,
> - data_reg_blk_size);
> - if (retval != data_reg_blk_size) {
> - dev_err(&client->dev, "%s:read data failed\n",
> - __func__);
> - return 0;
> - }
> - x = (data[0] << 4) | (data[2] & MASK_4BIT);
> - y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
> - wy = (data[3] >> 4) & MASK_4BIT;
> - wx = (data[3] & MASK_4BIT);
> -
> - if (pdata->board->x_flip)
> - x = pdata->sensor_max_x - x;
> - if (pdata->board->y_flip)
> - y = pdata->sensor_max_y - y;
> -
> - input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
> - max(wx, wy));
> - input_report_abs(input_dev, ABS_MT_POSITION_X, x);
> - input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
> -
> - /* number of active touch points */
> - touch_count++;
> - }
> - }
> -
> - /* sync after groups of events */
> - input_mt_sync_frame(input_dev);
> - input_sync(input_dev);
> - /* return the number of touch points */
> - return touch_count;
> -}
> -
> -/**
> - * synaptics_rmi4_report_device() - reports the rmi4 device
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @rfi: pointer to synaptics_rmi4_fn
> - *
> - * This function is used to call the report function of the rmi4 device.
> - */
> -static int synaptics_rmi4_report_device(struct synaptics_rmi4_data *pdata,
> - struct synaptics_rmi4_fn *rfi)
> -{
> - int touch = 0;
> - struct i2c_client *client = pdata->i2c_client;
> - static int num_error_reports;
> -
> - if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
> - num_error_reports++;
> - if (num_error_reports < MAX_ERROR_REPORT)
> - dev_err(&client->dev, "%s:report not supported\n",
> - __func__);
> - } else
> - touch = synpatics_rmi4_touchpad_report(pdata, rfi);
> - return touch;
> -}
> -/**
> - * synaptics_rmi4_sensor_report() - reports to input subsystem
> - * @pdata: pointer to synaptics_rmi4_data structure
> - *
> - * This function is used to reads in all data sources and reports
> - * them to the input subsystem.
> - */
> -static int synaptics_rmi4_sensor_report(struct synaptics_rmi4_data *pdata)
> -{
> - unsigned char intr_status[4];
> - /* number of touch points - fingers or buttons */
> - int touch = 0;
> - unsigned int retval;
> - struct synaptics_rmi4_fn *rfi;
> - struct synaptics_rmi4_device_info *rmi;
> - struct i2c_client *client = pdata->i2c_client;
> -
> - /*
> - * Get the interrupt status from the function $01
> - * control register+1 to find which source(s) were interrupting
> - * so we can read the data from the source(s) (2D sensor, buttons..)
> - */
> - retval = synaptics_rmi4_i2c_block_read(pdata,
> - pdata->fn01_data_base_addr + 1,
> - intr_status,
> - pdata->number_of_interrupt_register);
> - if (retval != pdata->number_of_interrupt_register) {
> - dev_err(&client->dev,
> - "could not read interrupt status registers\n");
> - return 0;
> - }
> - /*
> - * check each function that has data sources and if the interrupt for
> - * that triggered then call that RMI4 functions report() function to
> - * gather data and report it to the input subsystem
> - */
> - rmi = &(pdata->rmi4_mod_info);
> - list_for_each_entry(rfi, &rmi->support_fn_list, link) {
> - if (rfi->num_of_data_sources) {
> - if (intr_status[rfi->index_to_intr_reg] &
> - rfi->intr_mask)
> - touch = synaptics_rmi4_report_device(pdata,
> - rfi);
> - }
> - }
> - /* return the number of touch points */
> - return touch;
> -}
> -
> -/**
> - * synaptics_rmi4_irq() - thread function for rmi4 attention line
> - * @irq: irq value
> - * @data: void pointer
> - *
> - * This function is interrupt thread function. It just notifies the
> - * application layer that attention is required.
> - */
> -static irqreturn_t synaptics_rmi4_irq(int irq, void *data)
> -{
> - struct synaptics_rmi4_data *pdata = data;
> - int touch_count;
> -
> - do {
> - touch_count = synaptics_rmi4_sensor_report(pdata);
> - if (touch_count)
> - wait_event_timeout(pdata->wait, pdata->touch_stopped,
> - msecs_to_jiffies(1));
> - else
> - break;
> - } while (!pdata->touch_stopped);
> - return IRQ_HANDLED;
> -}
> -
> -/**
> - * synpatics_rmi4_touchpad_detect() - detects the rmi4 touchpad device
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @rfi: pointer to synaptics_rmi4_fn structure
> - * @fd: pointer to synaptics_rmi4_fn_desc structure
> - * @interruptcount: count the number of interrupts
> - *
> - * This function calls to detects the rmi4 touchpad device
> - */
> -static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
> - struct synaptics_rmi4_fn *rfi,
> - struct synaptics_rmi4_fn_desc *fd,
> - unsigned int interruptcount)
> -{
> - unsigned char queries[QUERY_LEN];
> - unsigned short intr_offset;
> - unsigned char abs_data_size;
> - unsigned char abs_data_blk_size;
> - unsigned char egr_0, egr_1;
> - unsigned int all_data_blk_size;
> - int has_pinch, has_flick, has_tap;
> - int has_tapandhold, has_doubletap;
> - int has_earlytap, has_press;
> - int has_palmdetect, has_rotate;
> - int has_rel;
> - int i;
> - int retval;
> - struct i2c_client *client = pdata->i2c_client;
> -
> - rfi->fn_desc.query_base_addr = fd->query_base_addr;
> - rfi->fn_desc.data_base_addr = fd->data_base_addr;
> - rfi->fn_desc.intr_src_count = fd->intr_src_count;
> - rfi->fn_desc.fn_number = fd->fn_number;
> - rfi->fn_number = fd->fn_number;
> - rfi->num_of_data_sources = fd->intr_src_count;
> - rfi->fn_desc.ctrl_base_addr = fd->ctrl_base_addr;
> - rfi->fn_desc.cmd_base_addr = fd->cmd_base_addr;
> -
> - /*
> - * need to get number of fingers supported, data size, etc.
> - * to be used when getting data since the number of registers to
> - * read depends on the number of fingers supported and data size.
> - */
> - retval = synaptics_rmi4_i2c_block_read(pdata, fd->query_base_addr,
> - queries,
> - sizeof(queries));
> - if (retval != sizeof(queries)) {
> - dev_err(&client->dev, "%s:read function query registers\n",
> - __func__);
> - return retval;
> - }
> - /*
> - * 2D data sources have only 3 bits for the number of fingers
> - * supported - so the encoding is a bit weird.
> - */
> - if ((queries[1] & MASK_3BIT) <= 4)
> - /* add 1 since zero based */
> - rfi->num_of_data_points = (queries[1] & MASK_3BIT) + 1;
> - else {
> - /*
> - * a value of 5 is up to 10 fingers - 6 and 7 are reserved
> - * (shouldn't get these i int retval;n a normal 2D source).
> - */
> - if ((queries[1] & MASK_3BIT) == 5)
> - rfi->num_of_data_points = 10;
> - }
> - pdata->fingers_supported = rfi->num_of_data_points;
> - /* Need to get interrupt info for handling interrupts */
> - rfi->index_to_intr_reg = (interruptcount + 7)/8;
> - if (rfi->index_to_intr_reg != 0)
> - rfi->index_to_intr_reg -= 1;
> - /*
> - * loop through interrupts for each source in fn $11
> - * and or in a bit to the interrupt mask for each.
> - */
> - intr_offset = interruptcount % 8;
> - rfi->intr_mask = 0;
> - for (i = intr_offset;
> - i < ((fd->intr_src_count & MASK_3BIT) + intr_offset); i++)
> - rfi->intr_mask |= 1 << i;
> -
> - /* Size of just the absolute data for one finger */
> - abs_data_size = queries[5] & MASK_2BIT;
> - /* One each for X and Y, one for LSB for X & Y, one for W, one for Z */
> - abs_data_blk_size = 3 + (2 * (abs_data_size == 0 ? 1 : 0));
> - rfi->size_of_data_register_block = abs_data_blk_size;
> -
> - /*
> - * need to determine the size of data to read - this depends on
> - * conditions such as whether Relative data is reported and if Gesture
> - * data is reported.
> - */
> - egr_0 = queries[7];
> - egr_1 = queries[8];
> -
> - /*
> - * Get info about what EGR data is supported, whether it has
> - * Relative data supported, etc.
> - */
> - has_pinch = egr_0 & HAS_PINCH;
> - has_flick = egr_0 & HAS_FLICK;
> - has_tap = egr_0 & HAS_TAP;
> - has_earlytap = egr_0 & HAS_EARLYTAP;
> - has_press = egr_0 & HAS_PRESS;
> - has_rotate = egr_1 & HAS_ROTATE;
> - has_rel = queries[1] & HAS_RELEASE;
> - has_tapandhold = egr_0 & HAS_TAPANDHOLD;
> - has_doubletap = egr_0 & HAS_DOUBLETAP;
> - has_palmdetect = egr_1 & HAS_PALMDETECT;
> -
> - /*
> - * Size of all data including finger status, absolute data for each
> - * finger, relative data and EGR data
> - */
> - all_data_blk_size =
> - /* finger status, four fingers per register */
> - ((rfi->num_of_data_points + 3) / 4) +
> - /* absolute data, per finger times number of fingers */
> - (abs_data_blk_size * rfi->num_of_data_points) +
> - /*
> - * two relative registers (if relative is being reported)
> - */
> - 2 * has_rel +
> - /*
> - * F11_2D_data8 is only present if the egr_0
> - * register is non-zero.
> - */
> - !!(egr_0) +
> - /*
> - * F11_2D_data9 is only present if either egr_0 or
> - * egr_1 registers are non-zero.
> - */
> - (egr_0 || egr_1) +
> - /*
> - * F11_2D_data10 is only present if EGR_PINCH or EGR_FLICK of
> - * egr_0 reports as 1.
> - */
> - !!(has_pinch | has_flick) +
> - /*
> - * F11_2D_data11 and F11_2D_data12 are only present if
> - * EGR_FLICK of egr_0 reports as 1.
> - */
> - 2 * !!(has_flick);
> - return retval;
> -}
> -
> -/**
> - * synaptics_rmi4_touchpad_config() - configures the rmi4 touchpad device
> - * @pdata: pointer to synaptics_rmi4_data structure
> - * @rfi: pointer to synaptics_rmi4_fn structure
> - *
> - * This function calls to configures the rmi4 touchpad device
> - */
> -static int synaptics_rmi4_touchpad_config(struct synaptics_rmi4_data *pdata,
> - struct synaptics_rmi4_fn *rfi)
> -{
> - /*
> - * For the data source - print info and do any
> - * source specific configuration.
> - */
> - unsigned char data[BUF_LEN];
> - int retval = 0;
> - struct i2c_client *client = pdata->i2c_client;
> -
> - /* Get and print some info about the data source... */
> - /* To Query 2D devices we need to read from the address obtained
> - * from the function descriptor stored in the RMI function info.
> - */
> - retval = synaptics_rmi4_i2c_block_read(pdata,
> - rfi->fn_desc.query_base_addr,
> - data, QUERY_LEN);
> - if (retval != QUERY_LEN)
> - dev_err(&client->dev, "%s:read query registers failed\n",
> - __func__);
> - else {
> - retval = synaptics_rmi4_i2c_block_read(pdata,
> - rfi->fn_desc.ctrl_base_addr,
> - data, DATA_BUF_LEN);
> - if (retval != DATA_BUF_LEN) {
> - dev_err(&client->dev,
> - "%s:read control registers failed\n",
> - __func__);
> - return retval;
> - }
> - /* Store these for use later*/
> - pdata->sensor_max_x = ((data[6] & MASK_8BIT) << 0) |
> - ((data[7] & MASK_4BIT) << 8);
> - pdata->sensor_max_y = ((data[8] & MASK_5BIT) << 0) |
> - ((data[9] & MASK_4BIT) << 8);
> - }
> - return retval;
> -}
> -
> -/**
> - * synaptics_rmi4_i2c_query_device() - query the rmi4 device
> - * @pdata: pointer to synaptics_rmi4_data structure
> - *
> - * This function is used to query the rmi4 device.
> - */
> -static int synaptics_rmi4_i2c_query_device(struct synaptics_rmi4_data *pdata)
> -{
> - int i;
> - int retval;
> - unsigned char std_queries[STD_QUERY_LEN];
> - unsigned char intr_count = 0;
> - int data_sources = 0;
> - unsigned int ctrl_offset;
> - struct synaptics_rmi4_fn *rfi;
> - struct synaptics_rmi4_fn_desc rmi_fd;
> - struct synaptics_rmi4_device_info *rmi;
> - struct i2c_client *client = pdata->i2c_client;
> -
> - /*
> - * init the physical drivers RMI module
> - * info list of functions
> - */
> - INIT_LIST_HEAD(&pdata->rmi4_mod_info.support_fn_list);
> -
> - /*
> - * Read the Page Descriptor Table to determine what functions
> - * are present
> - */
> - for (i = PDT_START_SCAN_LOCATION; i > PDT_END_SCAN_LOCATION;
> - i -= PDT_ENTRY_SIZE) {
> - retval = synaptics_rmi4_i2c_block_read(pdata, i,
> - (unsigned char *)&rmi_fd,
> - sizeof(rmi_fd));
> - if (retval != sizeof(rmi_fd)) {
> - /* failed to read next PDT entry */
> - dev_err(&client->dev, "%s: read error\n", __func__);
> - return -EIO;
> - }
> - rfi = NULL;
> - if (rmi_fd.fn_number) {
> - switch (rmi_fd.fn_number & MASK_8BIT) {
> - case SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM:
> - pdata->fn01_query_base_addr =
> - rmi_fd.query_base_addr;
> - pdata->fn01_ctrl_base_addr =
> - rmi_fd.ctrl_base_addr;
> - pdata->fn01_data_base_addr =
> - rmi_fd.data_base_addr;
> - break;
> - case SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM:
> - if (rmi_fd.intr_src_count) {
> - rfi = kmalloc(sizeof(*rfi),
> - GFP_KERNEL);
> - if (!rfi)
> - return -ENOMEM;
> - retval = synpatics_rmi4_touchpad_detect
> - (pdata, rfi,
> - &rmi_fd,
> - intr_count);
> - if (retval < 0) {
> - kfree(rfi);
> - return retval;
> - }
> - }
> - break;
> - }
> - /* interrupt count for next iteration */
> - intr_count += (rmi_fd.intr_src_count & MASK_3BIT);
> - /*
> - * We only want to add functions to the list
> - * that have data associated with them.
> - */
> - if (rfi && rmi_fd.intr_src_count) {
> - /* link this function info to the RMI module */
> - mutex_lock(&(pdata->fn_list_mutex));
> - list_add_tail(&rfi->link,
> - &pdata->rmi4_mod_info.support_fn_list);
> - mutex_unlock(&(pdata->fn_list_mutex));
> - }
> - } else {
> - /*
> - * A zero in the function number
> - * signals the end of the PDT
> - */
> - dev_dbg(&client->dev,
> - "%s:end of PDT\n", __func__);
> - break;
> - }
> - }
> - /*
> - * calculate the interrupt register count - used in the
> - * ISR to read the correct number of interrupt registers
> - */
> - pdata->number_of_interrupt_register = (intr_count + 7) / 8;
> - /*
> - * Function $01 will be used to query the product properties,
> - * and product ID so we had to read the PDT above first to get
> - * the Fn $01 query address and prior to filling in the product
> - * info. NOTE: Even an unflashed device will still have FN $01.
> - */
> -
> - /* Load up the standard queries and get the RMI4 module info */
> - retval = synaptics_rmi4_i2c_block_read(pdata,
> - pdata->fn01_query_base_addr,
> - std_queries,
> - sizeof(std_queries));
> - if (retval != sizeof(std_queries)) {
> - dev_err(&client->dev, "%s:Failed reading queries\n",
> - __func__);
> - return -EIO;
> - }
> -
> - /* Currently supported RMI version is 4.0 */
> - pdata->rmi4_mod_info.version_major = 4;
> - pdata->rmi4_mod_info.version_minor = 0;
> - /*
> - * get manufacturer id, product_props, product info,
> - * date code, tester id, serial num and product id (name)
> - */
> - pdata->rmi4_mod_info.manufacturer_id = std_queries[0];
> - pdata->rmi4_mod_info.product_props = std_queries[1];
> - pdata->rmi4_mod_info.product_info[0] = std_queries[2];
> - pdata->rmi4_mod_info.product_info[1] = std_queries[3];
> - /* year - 2001-2032 */
> - pdata->rmi4_mod_info.date_code[0] = std_queries[4] & MASK_5BIT;
> - /* month - 1-12 */
> - pdata->rmi4_mod_info.date_code[1] = std_queries[5] & MASK_4BIT;
> - /* day - 1-31 */
> - pdata->rmi4_mod_info.date_code[2] = std_queries[6] & MASK_5BIT;
> - pdata->rmi4_mod_info.tester_id = ((std_queries[7] & MASK_7BIT) << 8) |
> - (std_queries[8] & MASK_7BIT);
> - pdata->rmi4_mod_info.serial_number =
> - ((std_queries[9] & MASK_7BIT) << 8) |
> - (std_queries[10] & MASK_7BIT);
> - memcpy(pdata->rmi4_mod_info.product_id_string, &std_queries[11], 10);
> -
> - /* Check if this is a Synaptics device - report if not. */
> - if (pdata->rmi4_mod_info.manufacturer_id != 1)
> - dev_err(&client->dev, "non-Synaptics mfg id:%d\n",
> - pdata->rmi4_mod_info.manufacturer_id);
> -
> - list_for_each_entry(rfi, &pdata->rmi4_mod_info.support_fn_list, link)
> - data_sources += rfi->num_of_data_sources;
> - if (data_sources) {
> - rmi = &(pdata->rmi4_mod_info);
> - list_for_each_entry(rfi, &rmi->support_fn_list, link) {
> - if (rfi->num_of_data_sources) {
> - if (rfi->fn_number ==
> - SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
> - retval = synaptics_rmi4_touchpad_config
> - (pdata, rfi);
> - if (retval < 0)
> - return retval;
> - } else
> - dev_err(&client->dev,
> - "%s:fn_number not supported\n",
> - __func__);
> - /*
> - * Turn on interrupts for this
> - * function's data sources.
> - */
> - ctrl_offset = pdata->fn01_ctrl_base_addr + 1 +
> - rfi->index_to_intr_reg;
> - retval = synaptics_rmi4_i2c_byte_write(pdata,
> - ctrl_offset,
> - rfi->intr_mask);
> - if (retval < 0)
> - return retval;
> - }
> - }
> - }
> - return 0;
> -}
> -
> -/*
> - * Descriptor structure.
> - * Describes the number of i2c devices on the bus that speak RMI.
> - */
> -static struct synaptics_rmi4_platform_data synaptics_rmi4_platformdata = {
> - .irq_type = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
> - .x_flip = false,
> - .y_flip = true,
> -};
> -
> -/**
> - * synaptics_rmi4_probe() - Initialze the i2c-client touchscreen driver
> - * @i2c: i2c client structure pointer
> - * @id:i2c device id pointer
> - *
> - * This function will allocate and initialize the instance
> - * data and request the irq and set the instance data as the clients
> - * platform data then register the physical driver which will do a scan of
> - * the rmi4 Physical Device Table and enumerate any rmi4 functions that
> - * have data sources associated with them.
> - */
> -static int synaptics_rmi4_probe
> - (struct i2c_client *client, const struct i2c_device_id *dev_id)
> -{
> - int retval;
> - unsigned char intr_status[4];
> - struct synaptics_rmi4_data *rmi4_data;
> - const struct synaptics_rmi4_platform_data *platformdata =
> - client->dev.platform_data;
> -
> - if (!i2c_check_functionality(client->adapter,
> - I2C_FUNC_SMBUS_BYTE_DATA)) {
> - dev_err(&client->dev, "i2c smbus byte data not supported\n");
> - return -EIO;
> - }
> -
> - if (!platformdata)
> - platformdata = &synaptics_rmi4_platformdata;
> -
> - /* Allocate and initialize the instance data for this client */
> - rmi4_data = kcalloc(2, sizeof(struct synaptics_rmi4_data),
> - GFP_KERNEL);
> - if (!rmi4_data)
> - return -ENOMEM;
> -
> - rmi4_data->input_dev = input_allocate_device();
> - if (rmi4_data->input_dev == NULL) {
> - retval = -ENOMEM;
> - goto err_input;
> - }
> -
> - rmi4_data->regulator = regulator_get(&client->dev, "vdd");
> - if (IS_ERR(rmi4_data->regulator)) {
> - dev_err(&client->dev, "%s:get regulator failed\n",
> - __func__);
> - retval = PTR_ERR(rmi4_data->regulator);
> - goto err_get_regulator;
> - }
> - retval = regulator_enable(rmi4_data->regulator);
> - if (retval < 0) {
> - dev_err(&client->dev, "%s:regulator enable failed\n",
> - __func__);
> - goto err_regulator_enable;
> - }
> - init_waitqueue_head(&rmi4_data->wait);
> - /*
> - * Copy i2c_client pointer into RTID's i2c_client pointer for
> - * later use in rmi4_read, rmi4_write, etc.
> - */
> - rmi4_data->i2c_client = client;
> - /* So we set the page correctly the first time */
> - rmi4_data->current_page = MASK_16BIT;
> - rmi4_data->board = platformdata;
> - rmi4_data->touch_stopped = false;
> -
> - /* init the mutexes for maintain the lists */
> - mutex_init(&(rmi4_data->fn_list_mutex));
> - mutex_init(&(rmi4_data->rmi4_page_mutex));
> -
> - /*
> - * Register physical driver - this will call the detect function that
> - * will then scan the device and determine the supported
> - * rmi4 functions.
> - */
> - retval = synaptics_rmi4_i2c_query_device(rmi4_data);
> - if (retval) {
> - dev_err(&client->dev, "%s: rmi4 query device failed\n",
> - __func__);
> - goto err_query_dev;
> - }
> -
> - /* Store the instance data in the i2c_client */
> - i2c_set_clientdata(client, rmi4_data);
> -
> - /*initialize the input device parameters */
> - rmi4_data->input_dev->name = DRIVER_NAME;
> - rmi4_data->input_dev->phys = "Synaptics_Clearpad";
> - rmi4_data->input_dev->id.bustype = BUS_I2C;
> - rmi4_data->input_dev->dev.parent = &client->dev;
> - input_set_drvdata(rmi4_data->input_dev, rmi4_data);
> -
> - /* Initialize the function handlers for rmi4 */
> - set_bit(EV_SYN, rmi4_data->input_dev->evbit);
> - set_bit(EV_KEY, rmi4_data->input_dev->evbit);
> - set_bit(EV_ABS, rmi4_data->input_dev->evbit);
> -
> - input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_X, 0,
> - rmi4_data->sensor_max_x, 0, 0);
> - input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_Y, 0,
> - rmi4_data->sensor_max_y, 0, 0);
> - input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
> - MAX_TOUCH_MAJOR, 0, 0);
> - input_mt_init_slots(rmi4_data->input_dev,
> - rmi4_data->fingers_supported, 0);
> -
> - /* Clear interrupts */
> - synaptics_rmi4_i2c_block_read(rmi4_data,
> - rmi4_data->fn01_data_base_addr + 1, intr_status,
> - rmi4_data->number_of_interrupt_register);
> - retval = request_threaded_irq(client->irq, NULL,
> - synaptics_rmi4_irq,
> - platformdata->irq_type,
> - DRIVER_NAME, rmi4_data);
> - if (retval) {
> - dev_err(&client->dev, "Unable to get attn irq %d\n",
> - client->irq);
> - goto err_query_dev;
> - }
> -
> - retval = input_register_device(rmi4_data->input_dev);
> - if (retval) {
> - dev_err(&client->dev, "%s:input register failed\n", __func__);
> - goto err_free_irq;
> - }
> -
> - return retval;
> -
> -err_free_irq:
> - free_irq(client->irq, rmi4_data);
> -err_query_dev:
> - regulator_disable(rmi4_data->regulator);
> -err_regulator_enable:
> - regulator_put(rmi4_data->regulator);
> -err_get_regulator:
> - input_free_device(rmi4_data->input_dev);
> - rmi4_data->input_dev = NULL;
> -err_input:
> - kfree(rmi4_data);
> -
> - return retval;
> -}
> -/**
> - * synaptics_rmi4_remove() - Removes the i2c-client touchscreen driver
> - * @client: i2c client structure pointer
> - *
> - * This function uses to remove the i2c-client
> - * touchscreen driver and returns integer.
> - */
> -static int synaptics_rmi4_remove(struct i2c_client *client)
> -{
> - struct synaptics_rmi4_data *rmi4_data = i2c_get_clientdata(client);
> -
> - rmi4_data->touch_stopped = true;
> - wake_up(&rmi4_data->wait);
> - free_irq(client->irq, rmi4_data);
> - input_unregister_device(rmi4_data->input_dev);
> - regulator_disable(rmi4_data->regulator);
> - regulator_put(rmi4_data->regulator);
> - kfree(rmi4_data);
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_PM
> -/**
> - * synaptics_rmi4_suspend() - suspend the touch screen controller
> - * @dev: pointer to device structure
> - *
> - * This function is used to suspend the
> - * touch panel controller and returns integer
> - */
> -static int synaptics_rmi4_suspend(struct device *dev)
> -{
> - /* Touch sleep mode */
> - int retval;
> - unsigned char intr_status;
> - struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
> -
> - rmi4_data->touch_stopped = true;
> - disable_irq(rmi4_data->i2c_client->irq);
> -
> - retval = synaptics_rmi4_i2c_block_read(rmi4_data,
> - rmi4_data->fn01_data_base_addr + 1,
> - &intr_status,
> - rmi4_data->number_of_interrupt_register);
> - if (retval < 0)
> - return retval;
> -
> - retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
> - rmi4_data->fn01_ctrl_base_addr + 1,
> - (intr_status & ~TOUCHPAD_CTRL_INTR));
> - if (retval < 0)
> - return retval;
> -
> - regulator_disable(rmi4_data->regulator);
> -
> - return 0;
> -}
> -/**
> - * synaptics_rmi4_resume() - resume the touch screen controller
> - * @dev: pointer to device structure
> - *
> - * This function is used to resume the touch panel
> - * controller and returns integer.
> - */
> -static int synaptics_rmi4_resume(struct device *dev)
> -{
> - int retval;
> - unsigned char intr_status;
> - struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
> -
> - retval = regulator_enable(rmi4_data->regulator);
> - if (retval) {
> - dev_err(dev, "Regulator enable failed (%d)\n", retval);
> - return retval;
> - }
> -
> - enable_irq(rmi4_data->i2c_client->irq);
> - rmi4_data->touch_stopped = false;
> -
> - retval = synaptics_rmi4_i2c_block_read(rmi4_data,
> - rmi4_data->fn01_data_base_addr + 1,
> - &intr_status,
> - rmi4_data->number_of_interrupt_register);
> - if (retval < 0)
> - return retval;
> -
> - retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
> - rmi4_data->fn01_ctrl_base_addr + 1,
> - (intr_status | TOUCHPAD_CTRL_INTR));
> - if (retval < 0)
> - return retval;
> -
> - return 0;
> -}
> -
> -#endif
> -
> -static SIMPLE_DEV_PM_OPS(synaptics_rmi4_dev_pm_ops, synaptics_rmi4_suspend,
> - synaptics_rmi4_resume);
> -
> -static const struct i2c_device_id synaptics_rmi4_id_table[] = {
> - { DRIVER_NAME, 0 },
> - { },
> -};
> -MODULE_DEVICE_TABLE(i2c, synaptics_rmi4_id_table);
> -
> -static struct i2c_driver synaptics_rmi4_driver = {
> - .driver = {
> - .name = DRIVER_NAME,
> - .pm = &synaptics_rmi4_dev_pm_ops,
> - },
> - .probe = synaptics_rmi4_probe,
> - .remove = synaptics_rmi4_remove,
> - .id_table = synaptics_rmi4_id_table,
> -};
> -
> -module_i2c_driver(synaptics_rmi4_driver);
> -
> -MODULE_LICENSE("GPL v2");
> -MODULE_AUTHOR("naveen.gaddipati@xxxxxxxxxxxxxx, js.ha@xxxxxxxxxxxxxx");
> -MODULE_DESCRIPTION("synaptics rmi4 i2c touch Driver");
> diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h
> deleted file mode 100644
> index 8c9166b..0000000
> --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -/**
> - *
> - * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
> - * Copyright (c) 2007-2010, Synaptics Incorporated
> - *
> - * Author: Js HA <js.ha@xxxxxxxxxxxxxx> for ST-Ericsson
> - * Author: Naveen Kumar G <naveen.gaddipati@xxxxxxxxxxxxxx> for ST-Ericsson
> - * Copyright 2010 (c) ST-Ericsson AB
> - */
> -/*
> - * This file is licensed under the GPL2 license.
> - *
> - *#############################################################################
> - * GPL
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published
> - * by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> - * for more details.
> - *
> - *#############################################################################
> - */
> -
> -#ifndef _SYNAPTICS_RMI4_H_INCLUDED_
> -#define _SYNAPTICS_RMI4_H_INCLUDED_
> -
> -/**
> - * struct synaptics_rmi4_platform_data - contains the rmi4 platform data
> - * @irq_number: irq number
> - * @irq_type: irq type
> - * @x flip: x flip flag
> - * @y flip: y flip flag
> - *
> - * This structure gives platform data for rmi4.
> - */
> -struct synaptics_rmi4_platform_data {
> - int irq_type;
> - bool x_flip;
> - bool y_flip;
> -};
> -
> -#endif
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html