[PATCH 4.2.y-ckt 026/305] usb: chipidea: debug: disable usb irq while role switch

From: Kamal Mostafa
Date: Fri Jan 15 2016 - 20:33:31 EST

4.2.8-ckt2 -stable review patch. If anyone has any objections, please let me know.


From: Li Jun <jun.li@xxxxxxxxxxxxx>

commit 251b3c8b57481bcecd3f753108e36e7389ce12ac upstream.

Since the ci->role will be set after the host role start is complete, there
will be nobody cared irq during start host if usb irq enabled. This error
can be reproduced on i.mx6 sololite EVK board by:
1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1
in dts.
2. boot up the board with ID cable and usb device connected.
3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role
4. echo host > /sys/kernel/debug/ci_hdrc.0/role
5. irq 212: nobody cared.

Signed-off-by: Li Jun <jun.li@xxxxxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
drivers/usb/chipidea/debug.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 5b7061a..6a4151c 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -316,8 +316,10 @@ static ssize_t ci_role_write(struct file *file, const char __user *ubuf,
if (role == CI_ROLE_END || role == ci->role)
return -EINVAL;

+ disable_irq(ci->irq);
ret = ci_role_start(ci, role);
+ enable_irq(ci->irq);

return ret ? ret : count;