Re: [PATCH v3 6/9] ARM: dts: rockchip: add the sdio power sequence for kylin board
From: Heiko Stuebner
Date: Sun Jan 17 2016 - 14:31:15 EST
Am Freitag, 15. Januar 2016, 21:49:53 schrieb Caesar Wang:
> This patch adds the sdio power sequence for kylin board.
> The WLAN attached to a SDIO interface, wifi/bluetooth have
> reset and power been needed to enable.
> AFAIK, the simple power sequence provider sets a value for multiple GPIOs.
> So the reset and power of WlAN chip can be handled in mmc power sequence.
> On the module itself this is one of these, that should can be handled by
> reset GPIOs in simple mmc power sequence.
> The Bluetooth host wake is high active from bootup, this patch is also
> set pinctrl bias as the default to enable the pull up in soc internal.
> Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
applied to my dts32 branch for 4.6,
after moving the sdio-pwrseq node to its correct alphabetical position.
Please try to keep to the sorting :-)