[PATCH v4 0/1] Introduce Innosilicon HDMI driver on Rockchip platforms

[Yakir Yang]

Here are a brief introduction to Innosilicon HDMI IP:
 - Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter
 - Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec
 - Digital video interface supports a pixel size of 24, 30, 36, 48bits color
   depth in RGB
 - S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission
   (32-192kHz Fs) using IEC60958 and IEC 61937
 - The EDID and CEC function are also supported by Innosilicon HDMI Transmitter
   Controlle


Changes in v4:
- Modify the commit title "drm/rockchip: hdmi: ..." (Mark)
- Correct the "DKMS" to "DPMS" (Mark)
- Fix over 80 characters problems (Mark)
- Remove encoder .prepare/.commit helper functions, and move the vop mode
  configure function into encoder .enable helper functions. (Mark)

Changes in v3:
- Use encoder enable/disable function, and remove the encoder DPMS function
- Keep HDMI PLL power on in standby mode

Changes in v2:
- Using DRM atomic helper functions for connector init (Mark)
- Remove "hdmi->connector.encoder = encoder;" (Mark)

Yakir Yang (1):
  drm/rockchip: hdmi: add Innosilicon HDMI support

 drivers/gpu/drm/rockchip/Kconfig     |   8 +
 drivers/gpu/drm/rockchip/Makefile    |   1 +
 drivers/gpu/drm/rockchip/inno_hdmi.c | 992 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/rockchip/inno_hdmi.h | 364 +++++++++++++
 4 files changed, 1365 insertions(+)
 create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c
 create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h

-- 
1.9.1