Re: [PATCH] watchdog: Add watchdog timer support for the WinSystems EBC-C384

From: Guenter Roeck
Date: Thu Jan 21 2016 - 22:42:53 EST


On 01/21/2016 05:11 PM, William Breathitt Gray wrote:
The WinSystems EBC-C384 has an onboard watchdog timer. The timeout range
supported by the watchdog timer is 1 second to 255 minutes. Timeouts
under 256 seconds have a 1 second resolution, while the rest have a 1
minute resolution.

This driver adds watchdog timer support for this onboard watchdog timer.
The timeout may be configured via the timeout module parameter.

Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
---
MAINTAINERS | 6 ++
drivers/watchdog/Kconfig | 9 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/ebc-c384_wdt.c | 226 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 242 insertions(+)
create mode 100644 drivers/watchdog/ebc-c384_wdt.c

diff --git a/MAINTAINERS b/MAINTAINERS
index b1e3da7..c058abf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11629,6 +11629,12 @@ M: David Härdeman <david@xxxxxxxxxxx>
S: Maintained
F: drivers/media/rc/winbond-cir.c

+WINSYSTEMS EBC-C384 WATCHDOG DRIVER
+M: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
+L: linux-watchdog@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/watchdog/ebc-c384_wdt.c
+
WIMAX STACK
M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@xxxxxxxxx>
M: linux-wimax@xxxxxxxxx
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4f0e7be..94569ec 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -711,6 +711,15 @@ config ALIM7101_WDT

Most people will say N.

+config EBC_C386_WDT
+ tristate "WinSystems EBC-C384 watchdog timer support"
+ depends on X86
+ select WATCHDOG_CORE
+ help
+ Enables watchdog timer support for the watchdog timer on the
+ WinSystems EBC-C384 motherboard. The timeout may be configured via
+ the timeout module parameter.
+
config F71808E_WDT
tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f566753..1522316 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_EBC_C386_WDT) += ebc-c384_wdt.o
obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
obj-$(CONFIG_SP5100_TCO) += sp5100_tco.o
obj-$(CONFIG_GEODE_WDT) += geodewdt.o
diff --git a/drivers/watchdog/ebc-c384_wdt.c b/drivers/watchdog/ebc-c384_wdt.c
new file mode 100644
index 0000000..1d7bd67
--- /dev/null
+++ b/drivers/watchdog/ebc-c384_wdt.c
@@ -0,0 +1,226 @@
+/*
+ * Watchdog timer driver for the WinSystems EBC-C384
+ * Copyright (C) 2016 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define MODULE_NAME "ebc-c384_wdt"
+#define WATCHDOG_TIMEOUT 60
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
+ __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+/**
+ * struct ebc_c384_wdt - Watchdog timer device private data structure
+ * @wdd: instance of struct watchdog_device
+ * @lock: synchronization lock to prevent race conditions
+ * @base: base port address of the device
+ * @extent: extent of port address region of the device
+ */
+struct ebc_c384_wdt {
+ struct watchdog_device wdd;
+ spinlock_t lock;
+ unsigned base;
+ unsigned extent;
+};
+
+static int ebc_c384_wdt_start(struct watchdog_device *wdev)
+{
+ struct ebc_c384_wdt *wdt = watchdog_get_drvdata(wdev);
+
+ return wdt->wdd.ops->set_timeout(wdev, wdt->wdd.timeout);

This implies that setting the timeout would start the watchdog,
which is inappropriate (the timeout can be set while the watchdog
is stopped).

Also, setting the timeout sets both the resolution _and_ the timeout,
which is probably unnecessary when starting or pinging the watchdog.

+}
+
+static int ebc_c384_wdt_stop(struct watchdog_device *wdev)
+{
+ struct ebc_c384_wdt *wdt = watchdog_get_drvdata(wdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+
+ outb(0x00, wdt->base + 2);
+
+ spin_unlock_irqrestore(&wdt->lock, flags);
+
Is there a reason to believe that the locking provided by the watchdog core
is insufficient ?

+ return 0;
+}
+
+static int ebc_c384_wdt_set_timeout(struct watchdog_device *wdev, unsigned t)
+{
+ struct ebc_c384_wdt *wdt = watchdog_get_drvdata(wdev);
+ unsigned long flags;
+ unsigned minutes = 0;

Unnecessary initialization.

+
+ if (!t || t > wdt->wdd.max_timeout)
+ return -EINVAL;

This won't happen.

+
+ spin_lock_irqsave(&wdt->lock, flags);
+
+ /* resolution is in minutes for timeouts greater than 255 seconds */
+ if (t > 255) {
+ /* truncate seconds to minute resolution */
+ minutes = t/60;

t / 60;

+
+ /* set watchdog timer for minutes */
+ outb(0x80, wdt->base + 1);
+ outb(minutes, wdt->base + 2);
+
+ wdt->wdd.timeout = minutes * 60;
+ } else {
+ /* set watchdog timer for seconds */
+ outb(0x00, wdt->base + 1);
+ outb(t, wdt->base + 2);
+
It may be better to set the number of seconds first before setting the scale.

+ wdt->wdd.timeout = t;
+ }
+
+ spin_unlock_irqrestore(&wdt->lock, flags);
+
+ return 0;
+}
+
+static const struct watchdog_ops ebc_c384_wdt_ops = {
+ .start = ebc_c384_wdt_start,
+ .stop = ebc_c384_wdt_stop,
+ .set_timeout = ebc_c384_wdt_set_timeout
+};
+
+static const struct watchdog_info ebc_c384_wdt_info = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT,
+ .identity = MODULE_NAME
+};
+
+static int __init ebc_c384_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ebc_c384_wdt *wdt;
+ const unsigned base = 0x564;
+ const unsigned extent = 5;
+ const char *const name = dev_name(dev);

What is the value of those const variables ? Why not just use dev_name() and defines ?

+ int err;
+

Is there a means to detect if this is the correct system ? DMI, maybe ?
Blindly instantiating the driver seems to be a bit risky and should be avoided
if possible.

+ wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ if (!request_region(base, extent, name)) {

Please use devm_request_region(), or explain why it is not feasible.

+ dev_err(dev, "Unable to lock %s port addresses (0x%X-0x%X)\n",
+ name, base, base + extent);

name is redundant and already provided by dev_err().

+ err = -EBUSY;
+ goto err_lock_io_port;

return -EBUSY;

+ }
+
+ dev_set_drvdata(dev, wdt);
+
+ wdt->wdd.info = &ebc_c384_wdt_info;
+ wdt->wdd.ops = &ebc_c384_wdt_ops;
+ wdt->wdd.min_timeout = 1;
+ wdt->wdd.max_timeout = 15300;
+ wdt->base = base;
+ wdt->extent = extent;

Both base and extent are constants. Why keep them in the data structure ?

+
+ spin_lock_init(&wdt->lock);
+
+ watchdog_set_nowayout(&wdt->wdd, nowayout);
+ watchdog_set_drvdata(&wdt->wdd, wdt);
+
+ err = watchdog_init_timeout(&wdt->wdd, timeout, dev);
+ if (err)
+ goto err_init_timeout;

A more tolerant implementation would set the default timeout.

+
+ err = watchdog_register_device(&wdt->wdd);
+ if (err)
+ goto err_register_wdt;
+
+ return 0;
+
+err_register_wdt:
+err_init_timeout:

Two labels pointing to the same location is unnecessary.

+ release_region(base, extent);
+err_lock_io_port:

Unnecessary label. When you use devm_request_region(),
the error handling should no longer be needed at all.

+ return err;
+}
+
+static int ebc_c384_wdt_remove(struct platform_device *pdev)
+{
+ struct ebc_c384_wdt *wdt = platform_get_drvdata(pdev);
+
+ release_region(wdt->base, wdt->extent);

No watchdog_unregister_device() ?

+
+ return 0;
+}
+
+static struct platform_driver ebc_c384_wdt_driver = {
+ .driver = {
+ .name = MODULE_NAME
+ },
+ .remove = ebc_c384_wdt_remove
+};
+
+static struct platform_device *ebc_c384_wdt_device;
+
+static int __init ebc_c384_wdt_init(void)
+{
+ int err;
+
+ ebc_c384_wdt_device = platform_device_alloc(
+ ebc_c384_wdt_driver.driver.name, -1);
+ if (!ebc_c384_wdt_device)
+ return -ENOMEM;
+
+ err = platform_device_add(ebc_c384_wdt_device);
+ if (err)
+ goto err_platform_device;
+
+ err = platform_driver_probe(&ebc_c384_wdt_driver, ebc_c384_wdt_probe);
+ if (err)
+ goto err_platform_driver;
+
+ return 0;
+
+err_platform_driver:
+ platform_device_del(ebc_c384_wdt_device);
+err_platform_device:
+ platform_device_put(ebc_c384_wdt_device);
+ return err;
+
+ return 0;
+}
+
+static void __exit ebc_c384_wdt_exit(void)
+{
+ platform_device_unregister(ebc_c384_wdt_device);
+ platform_driver_unregister(&ebc_c384_wdt_driver);
+}
+
+module_init(ebc_c384_wdt_init);
+module_exit(ebc_c384_wdt_exit);
+

Have you considered using module_platform_driver_probe() ?

+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@xxxxxxxxx>");
+MODULE_DESCRIPTION("WinSystems EBC-C384 watchdog timer driver");
+MODULE_LICENSE("GPL");

GPL v2 as stated above.


No MODULE_ALIAS ?